Grayson Austin

Sold.

Randy, I've got one available for sale if you are looking. Latest version with the pro arms. As new/unused. Email me at: graysonaustin@me.com

Bump and new price. $1000 for XCS custom length centerpost and end connectors. Email only to: graysonaustin@me.com

Additional photos including cables, brackets, Cworld, focus rings, etc. Cables shown include: Camin 3M MDR power from P tap, Arri RS port (also run/stop), Panavision (also run/stop), Sony F series like F55 (also run/stop), PRO Steadicam rig, Tiffen Ultra2/M1, MK-V rig. Run/Stop for the above mentioned as well as Red cameras. Cbus data cables for Cworld or hardline connection of handset to Camin MDR (long, short and coiled), Cworld data/power cables from Arri Alexa cameras, Cinetape data and power from Camin 3M MDR, bracket/data cable for Cdisplay2 to Cvolution handset. Motor cables for Hedén M21VE and Arri CLM4. Motor brackets to adapt to Jerry Hill PAM brackets (also included), monitor mount brackets for handset, zoom mount bracket for fluid head pan handle. Wooden handgrips for handsets and zoom module. Battery Chargers. Rings for handset knobs including set of pre marked rings for lens mapping.

some have asked if the package could be purchased without the Cdisplay2 and/or Cworld wifi hub if they don't need them. I can sell the package minus the Cdisplay2 but with Cworld for $21,000. Package without Cworld but with Cdisplay2 for $24,000. Package without either Cdisplay2 or Cworld for $20,000. Package will also come with unused and beautiful wooden handgrips for both handsets as well as the default rubberized grips. Email to: graysonaustin@me.com

Cmotion Cvolution Arri White Radio Lens Control System For Sale: Please read all of the following carefully before emailing. For sale is a very comprehensive Cmotion Arri White Radio system in excellent condition (many items unused) which includes all of the following: *(2) Cvolution handset bases. *(2) Cvolution Advanced Knobs. *(1) Cvolution modular Zoom unit. *(1) Cvolution Camin 3M MDR (Lemo version). *(1) Cdisplay2 lens data system with many lenses loaded. *(1) Cdisplay2 handset mounting bracket (power and data). *(1) Cworld Wifi unit with lens data and Cinetape data programs loaded. *(2) Arri CLM4 motors with gear sets. *(1) Hedén M21VE motor with gears. *(6) handset batteries. *(2) battery chargers (both dual chargers). *Set of three pre marked focus rings for lens mapping. *10 additional blank rings for iris, etc. *An extensive cable set with multiples of motor cables, power cables, Run/Stop cables for just about any camera and data cables worth easily $3000. *Lots of brackets for motor mounting, MDR mounting, handset monitor mounting, etc worth well over $1500. Cmotion Soft case. This complete (and then some) package is worth well over $35,000 if purchased new. Selling everything as a package for $25,000. All gear is in perfect working order and much of it is like new or unused. You will not find a more complete, walk into any set ready to work package, any job big or small at this price. More photos available by email. Cworld, brackets and most of the cables are not shown in the attached photos. Email only please to: graysonaustin@me.com I am not breaking up the package at this time so please don't ask. Priority will be given to first in line. I do have one other White Radio Handset with Advanced Knob that I will sell separately or can be added to this package for a special price that is in pristine condition. No window shoppers please. Serious only. Grayson Grant Austin, SOC graysonaustin@me.com

MK-V V2 Two Inch custom gimbal for sale. This gimbal is anodized in a custom blue and is in pristine condition. The only marks on it are anodizing blemishes when it was being anodized. This is a backup gimbal and has seen almost no use. Fits two inch center posts. Gimbal handle is sized for 5/8 inch PRO size armposts. New price is $5975. Selling for $3500 US. Buyer is responsible for shipping. Email only please to: graysonaustin@me.com Grayson Grant Austin, SOC

Tiffen M1 rig for sale: Tiffen M1 in Pristine/ like new condition with many extras and customizations. Please read everything carefully and email only please to the email address below: Tiffen's state of the art modular rig now allows TopStage and Battery Stage to be removed for service or upgrading. Gimbal can now also be removed easily for cleaning and service as well. The gimbal on this rig has been customized by Tiffen to be above their own factory specs for gimbal performance. This rig has a brand new centerpost to match the upgraded gimbal. Tilting TopStage with precise vernier adjustment has three separate HD video lines and two D tap outs as well as all the standard power distribution through Lemo connectors. Dual V mount Battery Stage with no tools battery fore/aft slide and vertical adjustment. Quick release MDR bracket. Two Anton Bauer to V mount adapter plates included. Two camera dovetail plates. Tiffen no tools monitor mount(attached photo shows older version of Tiffen monitor yoke. Rig includes newer no tools version). Transvideo 6 inch X SBL monitor with built in wireless level 2 and Bluetooth module for communication to Wireless level3. Transvideo wireless Level Sensor3 with power cable and rod mounting bracket. Multiple Camera power cables (Arri, Panavision, 12 volt for Red and Sony, etc) with multiples of each type. Ten IDX high amp draw batteries. Three chargers (one quad and two dual chargers). Jerry Hill complete Gorelock Docking Bracket. Gorelock docking ring. Rig case. Battery Case. Selling this like new rig and everything listed above for $28,000 US. No arm or vest included but I am selling a Tiffen Exovest which can be added to this rig for a very special price. Inquire if interested. Buyer is responsible for shipping and a shipping account like FedEx is preferable (and very easy to get as an individual by the way). Serious only. No Window Shoppers Please. Email only to the following email for more info and additional photos: graysonaustin@me.com Grayson Grant Austin, SOC

Selling an XCS 2 inch centerpost with the built in XCS centerpost cable. This post has seen almost no use and is in fantastic condition. No dings or scratches on the post. It comes with XCS docking rings and a bonus of new/unused complete XCS bayonet connectors and collars with shims. Selling all for $1500 US. Buyer responsible for shipping. PayPal preferred. Serious only. Email only to: graysonaustin@me.com

Price reduced. $3500 for Cdisplay2 and wired handset bracket. Works with both White Arri radio Cmotion handsets and Black radio handsets. Email to: graysonaustin@me.com

Long range wireless HD transmission system packages for sale at a huge savings. Please read the post carefully before emailing. Selling off lots of excess gear to make room including some of our wireless video systems. Three systems available: I have one of my ultimate wireless systems for sale which has seen very little use and has spent most of its time as a backup system. This transmitter and receivers are the exact same as any of the 300m and 150m systems out there like Cinegears, Tilta, Innocinema, etc except these came direct from the manufacturer Hollyland Tech and are unbranded. I personally have had our transmitters connected to first generation Tilta Receivers and vice versa. They perform flawlessly and have consistently beaten both Paralinx Tomahawks and Teradek Bolt 2000 systems on real feature film and television sets with real world Line Of Sight distances of well over 1300 feet and more importantly they punch through real location walls with great interior range as well. When the others fail or lose connection, these still work. Our other main system has been running nearly non stop on features and long term tv series with no failures or down time. Ten frequency channels. I have easily had all six receivers connected to one transmitter with no issue whereas some systems are limited to four. Every component of these systems is in excellent condition and has been tested to perform flawlessly together. Included with this system: *One 300m transmitter with Sony Battery plate. *Three matched 300m receivers with V Lock plates. *Three matched 150m receivers with Sony battery plates. *Twelve antennas (two for transmitter and five for each 300m receiver). *Seven Ptap to 4 pin Lemo power cables. *Two Arri 2 pin Lemo to 4 pin Lemo power cables for transmitter. *Three A/C to Lemo 4 pin cables. *One V lock to Anton Bauer adapter plate. *Two 5/8 baby pin stand adapters for receivers. *Two soft flexible transmitter antennas. *Two long range Paralinx panel antennas (directional panel antennas for increased range and signal integrity). *Pelican case with trekpak divider system. This system is ready to go on set and work. Use any combination of 300m and 150m receivers with the transmitter depending on the job needs. If purchased new, this package is worth over $15,000. Selling all equipment listed for $9200 US. I am not splitting up this package at this time so please don't ask. I also have (two) 1 transmitter to 1 receiver 300m systems available. Both are in excellent condition and have been tested to perform flawlessly. Included with each system: *One 300m transmitter with Sony Battery plate. *One 300m receiver with V Lock plate. *Seven antennas (two for transmitter and five for receiver). *Two Ptap to four pin Lemo power cables. Selling each for $2800 or buy both for $5200 and have a 1:2 system with a backup transmitter. Serious only. More photos available so email only please. graysonaustin@me.com Grayson Grant Austin, SOC

Price reduced: $4000 US. Works perfectly with Cmotion White radio handsets and Black Radio handsets. Email only please to: graysonaustin@me.com Grayson Grant Austin, SOC

That's a shame. It's hands down the most immune level sensor out there. Not keen on the separate display but for immunity to extraneous movement, it's awesome. The Transvideo version 3 standalone is no better than the 2 which is built into the monitor. The issue stated above happens with them both but not to the Wagner. Just wish it could display on screen and yes, I do own both versions of Transvideo and the Wagner and have done side by side tests with lateral moves, whip pans, etc. I can't speak about the new version of XCS level. It's probably great also. Grayson Grant Austin, SOC

Cmotion Cdisplay2 and wired handset bracket for sale in great condition. The Cdisplay2 adds many features to a Cmotion lens control including: Lens data with virtual lens focus/iris/zoom scales, depth of field, Cinetape display, autofocus, etc. Camera control with speed ramping/shutter angle changes as well for capable cameras. Has standalone wireless internal Cmotion Black radio installed but can be used hard connected to Cmotion white radio handsets with the included bracket. This Cdisplay comes pre loaded with many lenses that can be used as is or can be used as templates. If you own a Cmotion lens control, the Cdisplay2 will add a whole new level of control and information. Selling for $4500 US. Serious buyers only. Please email only for questions and more photos to: graysonaustin@me.com Grayson Grant Austin, SOC

To answer a couple of questions, No, they do not use the Amimon boards. Completely different. Mine are FCC approved and are labeled as such or I would not have purchased them. I can't speak about other companies using these boards as well but hopefully they are as well. Im sure Keslow Camera would have done their homework before buying so many of them and Tilta is a large enough company with a large enough US presence that it would not make sense for them to sell a product here and bypass FCC approval. I'm not aware that these use DFS. They are direct channel assigned by the channel knob on both transmitter and receivers. Set both to the same channel and go. 10 channels available. They have almost zero linkup time from power up and no searching. There is no pairing involved, hence He reason why mine can talk to Any of Keslow's Tiltas right out of the box. I have never heard from anyone that they use the DFS channels. Where did you see that? Please direct me to this info. Grayson Grant Austin, SOC

I own multiple sets but they are the direct from the manufacturer version. Also have some of the 150m receivers that are small and have internal antennas for directors handheld, focus puller, etc. The difference is Tilta rehouses them. The channel dial on mine uses a tweaker which I like better. The Tilta knobs get loose. Signal is great and almost no reconnect time. They consistently beat the bolt 2000 and Tomahawks in range and signal stability. Many shows with them now and not one day of trouble or down time. I have used mine together with the Tiltas and my transmitters talk to the Tilta receivers and vice versa. Keslow bought lots of the Tiltas. Grayson Grant Austin, SOC

MK-V rig components are sold. Thank you. Grayson Grant Austin, SOC

All motors are now sold. Thank you. Grayson Grant Austin, SOC

Final price drop for the last one I have available. As new/ unused CLM-4 motor as above. $1800 US. PayPal only. Buyer is responsible for shipping on their shipping account only. Email only please. graysonaustin@me.com Grayson Grant Austin, SOC

V2 Gimbal is no longer available. Dual Battery Rack no longer available. Unused/As new V4 Upper Electronics J Box, V4 Lower Electronics Box, 2 inch Four Stage Centerpost and V4 Centerpost cable still available. Please read carefully before emailing: Price drop due to removal of dual battery rack. Total for remaining components: $5500 US. PayPal only. Buyer is responsible for shipping on their account only. If you don't have one, you should get one regardless. A personal FedEx account is a must have if you own your own business and is easy to get. Email only please. graysonaustin@me.com Grayson Grant Austin, SOC

Did this motor sell? PM me if still available. Grayson Grant Austin, SOC

Had a couple people ask so I checked to be sure. This motor retails at AbelCine for $2879.10 Don't be fooled by the pricing in Euros for the European market on other sites. Arri has a totally different pricing structure in the US that has nothing to do with the correct exchange rate. If you live in the US, save almost $1000 off retail for an unused/ as new motor. $1900 takes the last one I have available. Email to: graysonaustin@me.com

1 sold. 1 still available. Grayson Grant Austin, SOC

Price reduction: $1900/ each. $3800/ both with all extras listed above. Email only please to: graysonaustin@me.com Grayson Grant Austin, SOC

For sale are unused/ as new backup parts for an MK-V V4 rig. Four Stage 2 inch Centerpost. Four Stage Centerpost V4 Cable. V4 Dual HD-SDI Upper Junction Box. V4 Dual HD-SDI Lower Junction Box/ Dual Battery Rack (v-Mount). $6000 US for all. Buyer responsible for shipping. A rarely used (twice) custom anodized Blue MK-V V2 two inch gimbal is also available with the above parts. Add $4000 to the above and you've almost got a complete rig as new/like new. Just add a topstage and a monitor mount and monitor. This rig is rock solid. I used my other rig almost exclusively for Alien Recolution work and it is solid and delivers plenty of power. See photos attached. This is a beautiful rig. Just don't need to keep all the extra gear. Email only to: graysonaustin@me.com Grayson Grant Austin, SOC