JohanPhillips

sold

PRO sled with bayonet mount PRO Center-post PRO Donkey Box I (low hours, has been on my super-post) PRO Upper Junction Box PRO Battery Module I CP 3A Gimbal with MK-W tool less clamping Custom thin side cable down the post PRO "T" MDR bracket 10 Ni-MH Batteries 13,2v 4.5 AH, weight 0,9 kg/1.9 lbs each Camera Essentials Rain-cover for battery cage Monitor bracket D-bracket Sled hard case manufactured in 2007, 3 extra storage compartments, compact & light Jerry hill dock (the fork) Jerry hill MAG dock 2 Black Jerry Hill locking-docking clamps 2 PAG multi format Battery Chargers 100-230 V~ (Li-On/Ni-Mh/Ni-Ch) 2 AC power cables Battery and charger hard case. Manufactured in 2007 very compact and light 6 PRO Battery charging cables 2 PRO-12v battery to 4-pin XLR power cables PRO gyro system, complete with cables and inverter, backpack, post clamp, (no gyros) Schematics for sled / manual Manuals for chargers Description: This sled is a PRO generation I. The rig was bought by me in 2000. It has been meticulously cared for with regular service and maintenance. It has only had two owners and has never been used as a rental rig. It is in great condition for a used system. That is a testament to the quality of the product that it is still in such a god condition. The center-post extends from 17” to 26”. There is a Custom extra cable down the center-post for tally or other function. The connector is on the left side of the monitor Lemo. The gimbal is a CP 3A that is in excellent condition and has been on the super-post all this time so naturally it has low use. It has been fitted with a MKW tool less lock. 10 PRO Ni-MH batteries. 13,2v 4.5Ah. All ten batteries are in good condition. 5 were re-celled in 2010 and the other 5 in 2007. They all work perfectly. In 2009 The 10 batteries were rebuilt changing the voltage-push button on the back. The new button has a better click "easy-puch " function and are better than the original. On one battery the voltage-display is dead. I normally use that for the monitor so thats no problem. The display is probably easy to replace. The Ni-MH batteries weigh (0,9-kg)less than standard Ni-Cd and also have a lot more Ah. Two 4-channel PAG battery chargers in excellent condition fairly low hours, bought in 2005 and 2006. They come with 6 battery charging cables and two AC power mains. The GYRO system just needs 2 gyros and is ready to go. Or maybe as a rebuild for a GoldMount-light-weigth system. photos of the sled $ 6000 O.B.O Will ship worldwide TB-6 and PDL Sold and not included. ------------------------------------------------- Johan Phillips Film & Steadicam Sweden M +46 70-733 06 91 Skype:johanph My email

Hi Selling my loved TB-6. It has the Duo framline and also comes with the digital level with crosshair. Spent 13500+2200=15700 selling for 7500 bought new from XCS G Bubb in August 2006. please mail me for more pics and info. Email me kind regards johan

PRO Generation I Sled with bayonet mount PRO Center-post PRO Donkey Box I (low hours, has been on my super-post) PRO Upper Junction Box PRO Battery Module I CP 3A Gimbal with MK-W tool less clamping Custom thin side cable down the post PRO "T" MDR bracket 10 Ni-MH Batteries 13,2v 4.5 AH, weight 0,9 kg/1.9 lbs each TB 6 Monitor with Duo digital frame-lines Bought from XCS-Greg Bubb 2006 (low hours) XCS level with X-hair. Bought from XCS-Greg Bubb 2006 Camera Essentials Rain-cover for monitor plexi/plastic Camera Essentials Rain-cover for battery cage Monitor bracket D-bracket Sled hard case manufactured in 2007, 3 extra storage compartments, compact & light Jerry hill dock (the fork) Jerry hill MAG dock 2 Black Jerry Hill locking-docking clamps 2 PAG multi format Battery Chargers 110-230W (Li-On/Ni-Mh/Ni-Ch) 2 AC power cables Battery and charger hard case. Manufactured in 2007 very compact and light 6 PRO Battery charging cables 2 PRO-12v to 4-pin XLR power cables PRO gyro system, complete with cables and inverter, backpack, post clamp, (no gyros) Schematics for sled / manual Manuals for chargers CLICK HERE FOR MORE PHOTOS Description This sled is a PRO generation I. The rig was bought by me in 2000. It has been meticulously cared for with regular service and maintenance. It has only had two owners and has never been used as a rental rig. It is in great condition for a used system. That is a testament to the quality of the product that it is still in such a good state. The center-post extends from 17” to 26”. There is a Custom extra cable down the center-post for tally or other function. The connector is on the left side of the monitor Lemo. The gimbal is a CP 3A that is in excellent condition and has been on the super-post all this time so naturally it has low use. It has been fitted with a MKW tool less lock. 10 PRO Ni-MH batteries. 13,2v 4.5Ah. All ten batteries are in good condition. 5 were re-celled in 2010 and the other 5 in 2007. They all work perfectly. In 2009 The 10 batteries were rebuilt changing the voltage-push button on the back. The new button has a better click "easy-puch " function and are better than the original. On one battery the voltage-display is dead. I normally use that for the monitor so thats no problem. The display is probably easy to replace. The Ni-MH batteries weigh (0,9-kg)less than standard Ni-Cd and also have a lot more Ah. Two 4-channel PAG battery chargers in excellent condition fairly low hours, bought in 2005 and 2006. They come with 6 battery charging cables and two AC power mains. The TB-6 is in good working order. A fantastic product and definitely the best green there is. Together withe the XCS- level it is a truly great unit. On the screen there are a few small scratchers. They disappear when the monitor is turned on. The GYRO system just needs 2 gyros and is ready to go. Or maybe as a rebuild for a GoldMount-light-weigth system. $ 12.500 Will ship worldwide ------------------------------------------------- Johan Phillips Film & Steadicam Sweden M +46 70-733 06 91 Skype:johanph Email me

Hi, I just want to get some ideá what type charger setup operators are using, for charging 10 Dionic hc. The four position Quad or the two position simultaneous charger? The smaller two position simultaneous charger (2722) is perfect for keeping it small and compact when traveling. But has it got to few positions? What are you guys using? kind regards johan

hi, I´m loking for a used PRO II Sled. just need the sled and not a compleate package. kind regards johan. johan@steadicam.se

I have one for sale

FI+Z II Control and MDR 1 This is a system in excellent condition, The system has never ever let me down. A true workhorse. 2.4GHZ Microwave link Hand-unit 2 serial# 2312 MDR-1 Motor Driver - 12/24v booster for MDR-1 serial# 1331 PRO Power Cable for MDR-1 CAMERA RUN cables for ARRICAM LT,ST, 435, 235. Arri 535, SR3 (fisher 3pin), Arri3, Arri BL3, 4 (fisher 11pin), Aaton, 35 III, XTR HD cameras, fits in the body of most video cameras, Moviecam, compact 17 focus scale discs, with pins. Multiple Antenna. 2 short and 4 long antennas. Digital Charger for NiMh 2 Batteries for hand Unit. Newly Installed cells (more power than original from Preston) All you need is motor and motor cable to have a class A system Price US$ 9,000 (or Best offer) Will Ship World-Wide. Please mail for pictures and questions skype: johanph Kind regards johan

are you still looking? mine is for sale

I'm looking for a used PRO 2 monitor or TB6. Chanses are slim but what the ,,,,,, Anybody have a unused back-up monitor, they are willing to part? kind regards johan Johan Phillips Film & Steadicam Sweden tel. +46 8-32 21 11 mob. +46 70-733 06 91 www.steadicam.se johan@steadicam.se

Hello fellow operators and Tim if he's listening in Is there a way to subscribe to the forum by email, like in the old one. Where you got the posts sent and not a link. All I seem to get is the one where you get a link and then have to go to the forum. The old system was faster and easier my 0,2?

My old friend is seeking a new home. The vest was rebuilt in LA in 2001. New pads, all new cords, new Velcro, and a superb X-cross system in the back (like on the PRO vest) Comes with a Grey Carlzone flightcase please mail for pics of the vest and case. Asking $1500 Will fedex anywhere. regards johan Johan Phillips Film & Steadicam S:t Eriksgatan 70 5tr S-113 20 Stockholm Sweden www.steadicam.se johan@steadicam.se Tel. +468 32 21 11 Mob. +4670 7330691

I´m thinking of the screw on the Arri 435 lowmode unit that touches the DB III. when in lowmode. The DB III is much wider But this little annoying screw holds the back part of the camera so you want to keep it there. There is unfortunately not enough tine to get plates from Gregg, Johan

Read through the old posts and yes the trick seems to be new plates but,,,, Have a job with the 435 and the plates from Gregg Bubb is yet to be ordered. What to do? Have you guys any emergency tips? do I simply remove the little screw on the camera resulting in vibration?? anyone? Grateful for help