Jump to content

Igor Savatovic

Premium Members
 View Profile  See their activity

  • Posts

    59

  • Joined

  • Last visited

  • Days Won

    2

 Content Type 

Posts posted by Igor Savatovic

  1. Issues with PRO arm socket block and vest screws.

    in General Discussion

    Posted · Edited by Igor Savatovic

    I have issues with screws on the vest's socket block and pro arm socket block. Since the position for the vest screws on the pro socket block is bent, it is actually damaging the thread on the screw itself.

    IMG_3950.heicIMG_3950.heicIMG_3950.heicIMG_3950.heicIMG_3950.heicIMG_3950.heic

    It is happening with my WK and and with my ARRI vest. Same problem. The thread on the screw gets damaged with time and is impossible to screw it out form vests socket block.

    any advice?

    Thanks

  5. Titan arm setup

    in Arms

    Posted

    On the upper arm section (one with the arm post). Blue canister goes up, black canister goes down.

    On the lower arm section (one with the socket block). Black canister goes up, blue canister goes down.

    this is the input from GPI Pro.

  6. Back mounted vest and GPI Pro Arm

    in General Discussion

    Posted

    In GPI Pro manual for titan Arm is suggested not to use PRO arm with Back mounted vest. 

    "Orientation of the socket block adapter assembly is critical in that, the Arm should never be mounted in such a way that the weight is applied parallel to the axis. This incorrect axis orientation is always present when using back mounted vests."

    And on the other hand, most of WK vest owners have PRO arm. Did anyone had any issues or a "catastrophic failure" with this combination?

    Cheers

  25. Sachtler/ARRI arms set for sale

    in Steadicam Marketplace - For Sale

    Posted · Edited by Igor Savatovic

    Two arms for sale. Older design arm comes with 26kg arm springs. New design, carbon fiber arm, comes with 30kg arm springs. 30 kg springs are new and Carbon fiber arm was tuned in ARRI/Munich in August this year. Carbon fiber arm also comes with aluminum arm bones. Also included is a set of 23kg springs with spring cables, and spare set of new spring cables. Springs are very easy to change. Manual will be sent with arms. Both arms are clean and in perfect working condition. With this set all steadicam and trinity needs are covered since it can carry almost any setup. If you wish to change the springs in the arm, it can be easily done before shipping. Both arms are coming with arm bags.

    I am selling this two arms as set for 9700USD. I strongly recommend to have both arms since in this case there is no need to change the arm springs. In other case, 30 kg, Carbon fiber arm with aluminum bones + 26kg springs is 7000USD. 23 kg, Aluminum arm is 3200USD. The arms are based in Dubai. Money transfer cost and shipping cost is paid by a buyer.

    contact:
    email: igor@cinematography.ae
    whatsapp: +971553245114

    _DSC3316.jpg

    _DSC3318.jpg

    IMG_2660.jpg

    IMG_2661.jpg

    IMG_2662.jpg

×
×
  • Create New...