steadiz
-
Posts
5 -
Joined
-
Last visited
Posts posted by steadiz
-
-
WTB: Arm Post- Pro Arm to Flyer LE
-
Looking for a BUZ with canon 8pin Canon interface. I have motors and cables.
Sent from my iPhone using Tapatalk
-
Hi,
I have a Steadicam Master Film and the other day I had a problem with may monitor. I tried to explain the best I can but my English is really bad.
Ok, the problem is that the image in the monitor have been reduced. The monitor is a 16/9 4/3 one. And now I see the 16/9 format on the size (space, I don?t know how to explain better) of the 4/3 and the 4/3 I see it even smaller. To sum up. I can?t see the image in full wide screen. I always have some lateral bands of no image.
Anyone understand what I have said? Anyone can help me?
Thank you in advance
Javi
Javi,
My monitor is doing the same thing. Did you resolve your problem and if you did what was the fix?
-
Hi All!!
Would anyone have a copy of the wiring diagram for Masters (Elite) series sled? (electronic file or hard copy, i'm not picky)
You'll have my undying gratitude and I'll take you out for beer if ur ever in Toronto!
Take Care!
-d.
I'm looking for some info on the Master Series Elite as well.
I need some info about the Power distribution for this model. I've metered the upper stage as well as the lower J-Box. This is what I found and need to know if this is the way it should be.
Upper Stage:
3 pin main power- not regulated (if the battery is supplying 16v the output is 16v)
4 pin Lemo's- 12v regulated
Lower J Box:
Power out for recorder- regulated
4 pin Lemo- not regulated
Monitor power- not regulated
I did a show and used productions Anton Bauer Hytron 140's. Pulled them right off of the charger and onto the rig. The result, I burned up a small 3" LCD monitor and my original green screen is not working correctly. I don't know if I fried the green screen monitor with the high voltage from the Anton Bauer's or if it was damaged during the flight back from my last gig. The green screen's picture is shifted and compressed 3/4 to the left.
What is the voltage input range for the monitor? 12v-?
So, do I have a Rig power issue, or is my green screen dead from age?
Any info on where i can get the green screen fixed?
-
Hi all, anybody know anything about wireless transmission via a microwave link from the steadi op. (with mobile camera flying) to the broadcast truck? Lemme know. Cheers, Layton.
Link Research (www.linkres.co.uk) has a great wireless system. Two components to their system. One is a video send system, Pal or NTSC, component or composite. This can be used as a stand alone system or you can used it with their camera control unit. The camera control unit will dock with just about any camera that can use a Sony BVV-5 record deck.
Review of Tom Wills - Standard arm post to flyer sled
in Arms
Posted
I’m looking for one of theses Arm Post. Would someone have Tom Wills contact info? Thanks