Ramon Engle

Ken, my situation was the same. Tried rebooting but found changing batteries helped. Strange since my voltage was reading well over 12 volts.

Nate what did you see as flawed with the Tilta cage for the Mini? Ramon

I've had this happen several times. The image from the mini will suddenly shift to the image I've attached. I can't determine if the issue is power or heat related. Just not sure what to make of this. In the past I've simply rebooted the camera and the image was proper. Had a job on Sunday, yes working on Mother's Day, where rebooting only temporarily fixed the issue. Eventually the camera behaved but for an hour during the day it was a real problem. Has anyone experienced this issue before?

I have an HU2 with the HOT Shot battery adapter available. Also if you are in the market to piece meal your kit together I have some money saving tips. Email me. ramon.engle@gmail.com

Zacuto makes 32pitch gear strips that you can wrap around Auto focus lenses. The issue becomes the fact that there are no hard stops on the focus barrel of an auto focus lens.........if that is what you have. You'll never know where you are on the lens since the barrel can continually rotate. Ramon

I demoed the Tilta FIZ system today. Very well made. Super modular. well thought out. Looks very similar to the Arri and Chrosziel systems. Its modular in that each motor will have an MDR that will stack together as motors are needed. They even have their own Cinetape version that was reading the event hall wall 60 feet away. I think the Arri UDM reads to 45 and the cinetape is only 21. Am I wrong? It Looked pretty sexy but we all know that functionality and dependability are the only issues that matter when your wide open at night doing a push in. 3 motor system costs 7K$!!!!! Not sure what to think about that. R

Pretty sweet. 2 motor channels cinetape interface Analog port for microforce gimbal control 4K$

Thanks to Tiffen for a fantastic gathering. Great to see everyone. Ramon

Abrmao email me. ramon.engle@gmail.com

Thank you.

anyone know the connector model and pin out for power to the Mini? Ramon

Hey guys. Thanks for all of your input. I've purchased mine and should get it in a day or so. Couple of AC's on my show were raving about them as well. Really looking forward to using it. Thanks again. Ramon

Sold

Sold.

Im selling a stanton zoom control. Completely overhauled by Stanton last month.spare motor included. Complete kit: Fuji gear and cables, Canon gear and cables. Remote hardwired box.Pics to follow. $1500. If you want to make an offer thats fine. Just dont insult me with something ridiculous.

Im selling a stanton zoom control. Completely overhauled by Stanton last month.spare motor included. Complete kit: Fuji gear and cables, Canon gear and cables. Remote hardwired box.Pics to follow. $1500. If you want to make an offer thats fine. Just dont insult me with something ridiculous.

Ian and Brooks thanks. My real issue is being off angle either well below or to the side of the monitor. How do either of these monitors perform from those perspectives?

Here are some pics.

If you're interested in contacting me please use the email below. ramon.engle@gmail.com

I need a monitor with great off angle viewability. I know OLED's offer the best but they are such low brightness I'm thinking of going with an LCD. Anyone have any experience with SmallHD's gear? I'll be using this monitor in all kinds of weird angles on my sled in conjunction with the Omega. So the monitor will be everywhere and tough to see at times. Any input will be appreciated. Thanks Ramon

Selling a KS-6 gyro with PRO Clamp and dual Lemo 2 pin connectors. Comes with a Gyro Cozy as well. Perfect working condition. $1800

Both have been sold.

The MKV bracket has been sold.

Here are two 2 inch post monitor brackets. The short one is from Film stuff the longer one is MKV. $100 each. Ramon 404.932.6600

Hi Dennis. I have one KS6 with PRO nipple connector and a gyro blimp. $1900 Ramon 404.932.6600