Osvaldo Silvera SOC

Replied here and also sent email, and email was bounced back

Looking to see if anyone has the Arri 416 Steadicam Bracket. It's a small squarish plate with a captive 3/8-16 screw and a couple of locating pins and a bunch of 3/8-16 threaded holes under it. Ozzie

Was this the 1st Steadicam Workshop? I thought it was at Image Devices in Miami. A rental house owned by David Haylock. (The place is still there and still open under the Budget Video Rentals now, same owner). Dan Kneece I believe was in attendance.

Pamela Berry was my 1st contact, got an automatic email telling me she was no longer with the company to send my inquiry to Rodger or Travis and I send an email to both of them still nothing.

Hi folks has Atomos closed down? Been trying to get my samurai blade 5.2 serviced and I've emailed 3 different people and not one has replied to any of my requests for service information. Been trying for about 2 months now but work has kept me pretty busy so I haven't pressed on but maybe there's a representative on this forum that wants to answer my question about where to send it for repair. I know you can't normally just send something in without an RA number. Just not sure if the company went bankrupt or out of business? They seem to still be selling items. Does anyone know a direct phone number where I can call someone for some help on getting my samurai serviced.

Hi there so what is a Tango unit going for nowadays? And how heavy of a camera or sensor pickup Mount can you put on the front of that thing? I have a job coming up that I think the reach and mobility of a Tango would be great for this particular shot. Can you put something like a Red helium with a prime lens on it? Ozzie

Does the Post have the HD Cable inside? the one with the 2 HD individual lines?

How is this thread holding up? Any other Converters to the Betz? I have had a DB3 for years, and before that the DB2 for years and before that the DB1.2?, 3A, 3, Model 1, etc... I have the Betz Wave, and the Betz Handheld shoulder rig. and I'd love to have all the mounts be the same. What is everyone thinking at this point 7-8 years later after the Betz top stage came out? I have at one story of vibration from the Betz top stage, causing the op to switch sleds all together. trying to gauge the current thoughts out there before plating some $$$ to TEST something out. If I went with the Betz, I'd always have a set of short rods on there to have the Hill MDR bracket on there. Ozzie

Hi there, What are the other parts that come with it? Is there anything that's not pictured? I see the $399 Frame and the $199 Universal adapter and the Tube Clamp Kit $99. Best, Ozzie

Hi folks, putting together another sled. Looking for a Top Stage. Used, As long as it works well. Could be a Betz, Could be a DB2, Maybe even an MKV3A XY top with a plate? Let me know what you have. DM me please. Thank you, Ozzie

All sorted out. Thanks Paul at Anton Bauer.!

Hi there, Thank you. Already sorted it out this morning. Thank you so much. Ozzie

Already sorted out, thank you folks. Ozzie

All done thank you folks

Hi folks. Working a job in LA and I'm gonna need 4 more HC batts. Looking for some that are in great shape. These are going to worked hard on the job. Let me know if you have any HC Batts. for sale. LA or LA area preferred for local pick up. Ozzie Ozzie@silverafilm.com

Got what I needed, . THANKS Folks!

Hi folks. I've had the Smpte Fibre Jumper cable for years and I used a set of Triax to BNC Jumpers once while on a job about 5 years ago. Coming up on another long term studio job and I thought Triax was a thing of the past...apparently not.. Looking for a set of the Triax to BNC Jumper connectors. It will be used on a Sony HDC2500 . If you have a set, Blow off the dust and let me know what you'd take for them. Ozzie

Hi folks. Does anyone have one of these Smallrig Universal Monitor cages. They came with the wood handles on the side and the plate on the back that was threaded for either V mount or Gold Mount battery plates? Maybe you've changed your Directors monitor set up and have one of these to let go? Reach out, Ozzie

Hi there folks. Helping out a friend here in town who already has a Steadicam Pilot Vest and Arm. Do you happen to have either the Pilot Sled or the Docking bracket laying around in the garage on a shelf and your willing to sell it? Let me know. Ozzie

Hi folks, In Toronto for a couple of days. If anyone has a PRO 7" plate they'd like to sell, please let me know. I have a DB3 top stage and am looking for one to live under my Wave1. If your in the area and happen to have one for sale, let me know. Ozzie

Hi there folks. looking for a friend who lives of the country. He currently flies a Clipper with a G70 and Clipper vest, he needs a second rig for an upcoming gig down there. He's looking for a PRO Titan arm, a PRO vest, and a PRO HD capable Sled. the monitor and accessories are easy enough to source. Let me know... DM me what you have available and a price. Please set a price shipped to Miami, FL He needs it in the next 3 weeks. Since he lives in Colombia and shipping might be a big hassle. I have folks in Miami who would receive the gear and take care of shipping it or traveling with it down south. so need to worry about the shipping portion except to Miami. Best, Ozzie

BTTT

Got one. Thanks Forum!

Hi folks. Entertaining the possibility of getting a wave system. I asked the company if any new versions were in the works and they replied no. Although an expensive bit of gear to just have in a case for the occasional beach and windy situation. I'm thinking it will also be great in hardmount camera car work. If you got one and are looking to part with it, let me know. US preferred. Direct Message me or Text. Thanks. Ozzie

BTTT XCS Short Gimbal Handle has been sold...