Osvaldo Silvera SOC

Hi folks...Bump.. Arm Without the Arm covers, Arm Bag or Posts $4800.

Here is my trusty heavy weight arm. Started out life at some point before me as an EFP, by the time I bought it, it was a 3A set up with reversible male socket but not with the Gold Springs, many years ago one of the springs broke and the arm went to Robert Luna to get it all Gold Spring Lunafied, it's been working great ever since. Comes with brand new short post and collar, a well used medium length post with 2 spin bearings, Pro carry bag, and a set of dust/rain covers .The case it's sitting in for this picture is not included. $5100 includes shipping anywhere in the continental US. It will be with me here just north of Atlanta until the 21st early AM for my flight back if any local folks want to see it and test it out. Ozzie 305-216-8395

BTTT

I remember a recent job where the producer said they only had peanuts for 12 hours. I said No, 2 months later when they were in production they called again, I explained to them the minimum I would go out for and suggested they assemble their steadicam shots all in a row so it would all be feasible in an 8 hour window...oh, and I wanted to be paid at the end of each day... It was almost 4 times what they offered and swore it was all they had,..... I did 4 days on that job, none was over 6 hours, 1 was under 2 hours from arrival to driving home. If you have the skills, stand your ground. and PS, I was once asked what rig I had, and I responded " The type that made the reel you watched and then called me with." Ozzie $800 for gear and labor.. That's almost Reality camera operator rate with no gear. I'm staying down south.

John Ritter is the MAN!!!, and he lives like 20 minutes from the house!

Good thing is if one is a Steadyrig gimbal, Hugo should be able to service it. Give him a ring.

1 Sold. Another identical system is available as above and now includes a 6dB antenna for the transmitter as well.

if your OK with Shipping, check out Ritter camera. they advertise on this page to the right of your screen. John Ritter in FLorida. He usually has chargers and batts.

My BFD's are still going wickedly strong. Big Hug Jim!!

Hi folks. You'e all seen these, the Transvideo Titan Standard Definition 4 channel US version( A,B.C.D) Transmitter and receiver. Pictures upon request. Here is whats included: Transmitter with standard Antenna Receiver with standard Antenna 1-AC adapter to 2 pin Lemo for receiver ( or Transmitter) 1-D tap to 2 pin Lemo power cable for Transmitter ( or Receiver) 1-6db Hi Gain Antenna for the receiver Information/Instruction card.laminated Shipping 2 day USPS Priority anywhere in the USA $500. Osvaldosilvera at A OH ELLE I've even used mine for a return feed when doing live work. Run a composite signal to the transmitter AC powered somewhere in the lighting grid or up high somewhere, and run the receiver with the D Tap power cable on the camera or sled with the hi gain 6db antenna and feed your SD return monitor.

It's worth it to reach out to Dan Ikeda at Steadicam directly. He may be able to get you an eta and you can buy directly from them I believe. But better yet, maybe someone on here bought an AB mount version and switched to V mount and has them sitting on a shelf!! Ask Dan about B stock parts also.

Are the original ones still being made for the XCS plates, the ones you refereed to in your post from 5 years ago?

Merry Christmas folks!! Hi, Looking for the Bracket to mount an MDR2 to the diving board mount on the front of my DB3. If you have something let me know. Thanks Ozzie

Great price, Just those 2 power cables are over 400$!

Aaron, which E car were you using? The steadicar that Monster Remotes has leased from down here should be able to go 40+ with driver, AC and you on it.

Email sent.

Preston 4533 MDR2 to Panavision Genesis Run cable w/ 90 deg connector on the Genesis side $40- 24" tip to tip Preston 4524 MDR2 to Aaton Run cable, both sides straight connectors $40- 26 1/4" tip to tip Lemo 4 pin male to Coherent 6 pin Fisher connector straight both ends $30- 18 1/4" tip to tip GPI-PRO1/2 3 pin Lemo (12 Volt) to Decimator 2.1mm with the locking bayonet tip as OEM $100 19.5" tip to tip All prices include slow boat Shipping in the US

WHY, WHY!!! Does a deal like this have to pop up when I just dropped a bunch on Lights!. WHY!!! Seriously, Good luck on the sale. Geez!! WHY!!!! The 72" is the perfect size!!!

If they were receled by John, then they're actually a wee bit stronger than the OEM ones. Great deal!

That is not a bad price at all for that Slider. I wish I had a current use for it, I'd be all over it.

Still Looking

Am I right to believe that if I order a Bartech Analog Run cable for the F55 and label it accordingly, that neither pin 1 nor pin 4 would be used therefore never being able to "FRY" anything? And as I understand it, most every Hirose 4 Pin connector which is used as a Power Out on a Camera is 1 GRND and 4 12V POS. At least the Sony broadcast shoulder cameras are Hirose Female connector 1 Unregulated ground and 4 12V Unregulated. Anyone have this cable for use with their Analog Bartech and F55, and how do they like it?

Repost sorry

Hi folks, as the title reads, I'm looking to buy BOXX Meridian cables, power ones actually. Let me know what you have. Also looking for a Boxx Meridian Receiver only as well.

Robert B, Steve C, Sean gray Brett Frey Camilo Jarquin Albert Gelabert Willem Van Vark All excellent and all have Steadicam experience. I just recently worked with Steve Ciffone on an Apple job last week.