Jump to content

Dean Gunderson

Premium Members
  • Posts

  • Joined

  • Last visited

  • Days Won


Dean Gunderson last won the day on November 21 2016

Dean Gunderson had the most liked content!


3 Neutral

About Dean Gunderson

Profile Information

  • Rig
  • Location
    Los Angeles

Recent Profile Visitors

2495 profile views
  1. Heden M21VE with new set of gears and a new PLC lightweight motor cable $1100 PLC Digital Bartech Reciever with a lightweight PRO focus cable (4 pin split) $500 PLC Bartech iris slider upgrade (used) $500 All in excellent condition
  2. Price drop to $4500. The gimbal spin tests perfectly.
  3. Excellent working condition. Comes with PRO gimbal tool and a spare bearing. The spare is at end of life, but works good. I kept it as backup or in case I ran into any extremely sandy conditions. $4750
  4. Everything is in like new condition; only used as backup or remote iris control. Not used since last service. Custom vintage case snugly fits recievers and hand unit without stressing the antennas. Included is: Bartech hand unit w/ iris slider S/N T1.2212 fStop reciever v2.1 S/N 1113 fStop reciever S/N 0408 Heden M26VE w 15mm adapter Heden M21VE w 15mm adaprer .4, .5, .6 and .8 gears for both motors Right angle antenna set 15mm dogbone adapter for 5/8 and 19mm (3) Motor cables (2) 12v XLR power cables P-TAP power cable 12 pin run/stop $5500
  5. 2 axis CamRemote package Nettman Systems International in Burbank can accessorize the head as needed for joystick control, wireless control, or third axis. Nettman can also upgrade the head to SAS stabilization. This is a class B stabilization for cranes and ground based support. Everything is in good working condition. It has original Hill MNH-1 amplifier boards that work excellent, and I'll sell an additional set of 3 of the newest NMH-3 boards to the buyer as an option for an additional $2000 The control box has a "digital" label on it, but it doesn't have that option. Nettman can upgrade it for you if you want. It makes it compatible with their fluid head controls. Make offer Includes Head 45 ̊ wheels control base 2 100’ Umbilical cables (can be connected together up to 300’) 2 midway cables (pan to tilt) Cam-Remote 24v power supply Spare amplifier board Witness cam system Vernier balancing camera mount Panavision riser Counterweight system Rods and brackets for lens motors and accessories Rain covers for 2 and 3 axis mode 3 shipping cases: head, controls, umbilical cables Custom Innerspace location case (mount/unmount underslung with no lifting and room for one umbilical cable) Camera power, start/stop cables and lens control interface cables Soft case for shipping second side Spare belts Spare fuses Schematics for control box, head and cables
  6. Master/Ultra arm with 17mm bearings. It has pitting in the anodizing, but is in perfect working order. Regularly serviced by Robert Luna. Includes 2 posts, delrin detuning spacers with custom tools to change them out, used extra covers, extra bumpers and small screws, and comes in a PRO soft bag. $4250 Klassen GB dual mount vest in excellent condition. Serial #100, originally for a 6’2” 188lb goofy foot operator. I used it in rear mount, standard mode with the front mount off. It comes with crossblocks for left or right hand back mount operation, spare hardware, and original Klassen arm and accessories bags. The arm was recently serviced by WK. $2500 Please contact me directly at dgun@pacbell.net I'm in Los Angeles
  7. Model III sled w/ telescoping post and side to side adjustment Extra base with gutted electronics, wired for 12v Dual Anton Bauer battery module, mounts on either base Transvideo Cine Monitor !!!a SB, 1200nit SD w/ yoke and Anton Bauer mount Pro(?) monitor arm Panavision and Arri baseplates J-Bracket Low mode cage plates Wrap grip Thermodyne flight case (worn foam, but usable) J box and J box to base extension cable Compact vehicle mount kit Manual including schematics and parts list Original battery base assembly and monitor arm Box o’ III spare electronics The sled is in great shape and solid, gimbal is smooth and pans flat. There’s worn anodizing where the wrap grip clamps. Fore and aft adjustment on the top stage and base. The original base shows little wear. The monitor is very bright and sharp, and the horizon works great. The second base is gutted (sorry, Terry) and wired for 12v parallel. I left a wire to run 24v to pin 3 on the J-box if you want to do that. The battery module is two diode and 10A breaker switch protected AB mounts and solidly mounts to either base. Total weight with gutted base, monitor and no batteries (as pictured) is about 12 lbs It comes with the compact vehicle mount kit that seems unused. The assembly instructions were still inside one of the tubes! Not sure if the monitor arm is a PRO, maybe an old version. It does flip for low mode the same: with two registration pins to keep it solid. A great starter sled or backup / big rig sled. You are welcome to try it out in the LA area, but if you aren’t around 6’5 and 200 lbs, you’ll need to bring a vest. $2,500
  8. Anybody want this? It's yours for the shipping cost. Please email me at dgun@pacbell.net
  • Create New...