Dean Gunderson

Transvideo Titan system. It works excellent and has only minor cosmetic wear. It comes with a PRO power/video cable, original Transvideo power supply for the receiver, a hinged antenna for the receiver, and a straight and right angle antenna for the receiver. Also included is a second reciever I was experimenting with; a diversity receiver by iftrontech that I had customized so the four channels of the receiver match the four used by the transmitter. I hooked it up and did a small test and the image was as steady as the Transvideo unit and it switched antennas seamlessly. The image was not as sharp as the Transvideo unit. I rarely use the Transvideo, so I never came across an environment where I could tell if the diversity helped. As it stands, it’s a good backup or director’s handheld receiver. It’s made in the US and customer support is very good. The website is: http://www.iftrontech.com/product_info.php?products_id=104 The price for all is $1200

Dropping again... $750 for either or $1250 takes it all.

Dropping the prices. Modulus 3000, antenna and cables: $800 DVX400 and antennas $900 Both together: $1600

Item had sold. Thank you.

Still for sale. Make an offer.

I can sell the entire package for $1750.

I think they made a small run of them and haven't made them since. I shoud have mentioned the control box has a Buffalo Den tag on the bottom as do a couple of the connector backshells. The guards for the thumb controler are coated with plasti dip for grip and to protect the post when it's docked. There is some ano wear under that. The rest of the gimbal mount I usually wrap a strip of soft side velcro on to protect the post, but took it off to show the condition. The motor and power cable aren't included. People are asking how it works so here goes: It’s really just a reconfigured Digital Microforce; the difference being there is a separate connector for power in and the thumb control knob runs out to a clamp that attatches to your gimbal. The connecting cable is super thin, so influence on the sled is unnoticeable. What makes this unit stand well above the other gimbal zoom units is that it’s a Preston system. You can use any of their motors and therefore any lens with a gear on it, and you can set the range of zoom. The feel is like a regular microforce, so it can be used for seamlessly zooming in a bit to stay out of lights, other peoples shots, etc . There is also the same LED display of lens position as the Digital Microforce has. The control box weighs 7.4 oz I can be reached at dgun@pacbell.net

The antennas are made for 400-1000mhz and have 5/8" mounts I can be reached at dgun@pacbell.net

Preston gimbal zoom with one cable to go from the control box to any Preston motor and two thin cables that go from the gimbal thumb control. Power in comes from any MDR four pin power cable. $2000 obo

Modulus 3000 field strength model with wide range power upgrade. Includes standard antenna , 3db attenuator, and one power cable each for PRO, Arri 12v, Arri 24v, and Panavision 24v. $900 DVX 400 receiver with 110v power supply and two Ramsey sharkfin antennas with zero loss cables soldered in $1000 Both are in excellent condition.

Cine Tape SOLD

Selling my Cine Tape and Preston zoom control packages Cine Tape: Cine Tape Measure Control S/N 30322 Sensor Assembly (2) Sensor cables (2) Panavision power cables (2) Arri, Movicam 24v power cables (1) Anton Bauer D-tap power cable (1) 4 pin XLR 12v power cable Cine arm articulating support Pelican case $5,600 for full package or $5,300 with only two power cables. In excellent working condition, lightly worn ano on edges. Package was just fully serviced yesterday at CE with a new pot for the rotary dial, new readout glass (old one in photo,) and calibration. Sensors replaced one year ago. Photos: http://s1082.photobucket.com/albums/j376/dgun/CineTape/ Preston gimbal zoom control $2000 Digital Micro Force box S/N 2007 Gimbal thumb control (fits Pro or XCS) (2)control to Micro Force cables (1)Micro Force to motor cable (5) extra set screws for control assembly Pelican case In excellent working order. The control has a lot of worn anodizing and both the DMF and control have been CNC tagged by Buffalo-Den. See detail photo. No motor included. No power cable, but it works with any 4 pin Lemo 1B power cable for the MDR. Photos: http://s1082.photobucket.com/albums/j376/dgun/Gimbal%20Zoom/ I can be reached at dgun@pacbell.net or 213-247-3211 Thanks for looking

SOLD. Thanks for all your interest.

Here's some pics. There's a detail of some wear around where the top docking ring goes. T. in Denmark, your email keeps bouncing back when I reply. Thanks

PRO telescoping centerpost with cable and modern PRO 2 mounts. I added a T handle to the tightening bolt so telescoping the post is tools free. $800 obo Dean Gunderson dgun@pacbell.net 213-247-3211

Sold. Thanks.

Steadicam 3A and vest for sale. Sled X-Y topstage. Solid. Derose tools-free telescoping carbon fiber post Wired thru-post with PRO pinout connectors in the j-box 3A gimbal in excellent shape 7 batteries with charger and 4 charging adapters. All batteries recelled 1 1/2 years ago and properly stored. 24v upconverter CP electronic level moved to back of base CP sony recorder adapter and cable with nonworking Hi8 recorder. Can be replaced or converted to run a DVR (add $250 including archos 404) Base and monitor just serviced and tested by Terry West. Innerspace rolling case Balance plate J-bracket Monitor hood Docking Bracket 12v power cable to camera 2 extra focus tubes 2 solid state triplers, and instructions on conversion Extra set of boards for monitor and base, sans CP tripler Box of backup electronic components (opamps, caps, etc) CP 3A instruction manual Model 3 vest with 2 sets of pads one set barely used. $7,500 obo For $1,000 extra, I'll swap the post to a stronger PRO 2 post with modern PRO bayonet mounts and j-box. I have an arm and camera, so if you're in LA, feel free to come fly it. dgun@pacbell.net 213-247-3211

"We don't have to pay sales tax if we purchase out of state but we do if we purchase out of country? Bastards. Maybe I'd be more willing to keep my purchases "Made In America" if any of it was." Hate to bring ya down, but this should be said. Californians are expected to pay sales tax on out of state purchases. It's called "use tax" and is reported in your state return. http://www.boe.ca.gov/sutax/usetaxreturn.htm Your accountant may not mention this or even tell you the state'll never know; if so, consider getting another accountant. There are much worse things that can come up from not paying this tax on time, mainly if you aren't charging sales tax on your rentals. As far as that goes, there are two schools of billing for rental of tangible property: let's call them the Otto Nemenz school and the Camera House school. Otto Nemenz charges sales tax on rentals. Their rental activity is considered an ongoing sale. They also don't have to pay property tax on all their gear. The Camera House does not charge sales tax on their rentals; instead, they pay property tax on their gear. The latter is especially good if your buisness has less than $100,000 worth of gear because you are exempt from property tax. That known, a requirement for the Camera House method is that you pay sales tax on your property in a "timely manner," i.e. at the sale, or in that years state return for out of state or out of country purchases. If you don't, you are supposed to pass sales tax on rentals to the BOE. If they find out you haven't, they will want those taxes + some nasty fines. Considering how much we make on rentals, that's a lotta cabbage. Best to just pay the use tax. http://www.boe.ca.gov/pdf/pub46.pdf Gotta disclaim here...I'm not an accountant. Please correct me if I'm wrong. I learned the basics in a free Small Buisnessmans Association class, and the rest from state websites and various accountants. I think I was lucky to learn this stuff early on. When you file for a DBA, you get a tax bill from the city of LA and that's it; seems you should get a brochure or sumthin'. Tax law is dodgy and changes constantly. Your accountant should know all about this stuff. A great source of information is in-house accountants at rental houses. They are paid to keep up with this specific area of stuff and are usually more than willing to talk to another human, especially in thier area of expertice. Fly safe

Need a Pro topstage, any generation. Thanks. 11/07: Got one. Thanks.

Looking for a used Pro J box. Dean Gunderson Los Angeles, CA 213-413-8603 dgun@pacbell.net

Ideally a Modulus 2000 or 3000 and DVX 400, but I'll condider any reliable equipment ya got. Dean Gunderson Los Angeles, CA 213-413-8603 dgun@pacbell.net

Still have the following items left: SLD100 with brackets for 5/8". 1/2" and 15mm rods: $1450 -I'll hold a wide 2" 64 pitch gear and a 48 pitch gear for the motor buyer to have the option to buy the gears at $50 each. BFD slider unit in like new condition with power pigtail and 4-pin XLR power: $1450 .6 and .5 gears for the SLD100 $50 each Motor cable; 1 straight, one right angle for SLD100, Heden, etc. $75 Email me for pictures or to arrange a looksee on Sundays. Thanks Again

Hello, I tried to keep this package together, but I got zero calls on my last post. If you want any of these individual items, they are available seperately. My address is dgun@pacbell.net, and please put the word Bartech in the subject line. I've kept the gear in excellent condition. I can send photos, or you can arrange to see the gear in person on Sundays. I live in Los Angeles. BFD unit, wheel BFD unit, slider (2) SLD100 motors both with CP brackets and .5, .625, and 15mm adapters One of each, all CP: 1/2"wide .8 gear, 1/2" wide 64p gear, 48p, .5, and .6 gears (2) motor cables lightweight arri 11 pin and 3pin run cables Panavision 10 pin run and power cable with led tally 4 pin hermaphodite power cable piggyback power cable (reciever to reciever) 4 pin XLR power cable PRO mount reciever bracket Rod mount reciever bracket w/ Panavision adapter Jerry Hill Dogbone w/ .625 adapter 10 9v Batts "y" motor cable for dual motors Hardwire wheel control to BFD control Heden M26p M26p bracket and idler gears 2 cases Thanks

Hello, I'm selling my Bartech focus and iris package. the list includes: BFD unit, wheel BFD unit, slider (2) SLD100 motors both with CP brackets and .5, .625, and 15mm adapters One of each, all CP: 1/2"wide .8 gear, 1/2" wide 64p gear, 48p, .5, and .6 gears (2) motor cables lightweight arri 11 pin and 3pin run cables Panavision 10 pin run and power cable with led tally PRO power cable piggyback power cable (reciever to reciever) 4 pin XLR power cable PRO mount reciever bracket Rod mount reciever bracket w/ Panavision adapter Jerry Hill Dogbone w/ .625 adapter 10 9v Batts 2 cases Asking $6500 obo. Feel free to call with any questions. My number is 213-413-8603.