Manolo Rojas

Dear community. Last May 15th I flew to Nice, France from LA, USA. We got one transfer in London. Finally my Sled case never arrive to Nice so I'm desperately trying to Find out were it is. My Sled is total custom made, so, is not brand on it, but below the electronic box in a yellow sticker say MP1S-003,in the donkey box it was attached my Bartech Receiver Serial No.R1.0153 and in the same case was my Transvideo Cinemonitor III Serial No.06DS049 Some of the caracteristics of the Sled. -2" Carbon Fiber center post. -Donkey box with blue anodized knobs for side to side and fore and aft, 3 of the knobs has 2 black O'rings and on one of it the O'rings are orange. -10mm thickness camera Plate with ribs everywhere, the holes for the camera screw are conic to work with C'snk Screws, it is blue anodized and one plate it was attached to the Donkey box and other plate was below the foam in the case. -Attached in the Monitor Bracket is my Marrell Video level/Frame line Generator. -For the monitor bracket and lower batteries stage it use 19mm carbon fiber rods. -The low electronic box can move up and down thru the central carbon fiber post. -In the lower 19mm rod is attached a linear laser, the laser is red anodized. -It has 4 batteries Anton Bauer Battery plates. -In the Top Stage It has 2 LEDs at each side to indicate 12v or 24v power in the camera connector. -All the Sled is in a Pelican Case 1650. There are 3 Sleds like this one in the World, one is own by Mirko Zlatar and the other one by Leo Saldano. If someone know something about my Sled please let me now as soon is possible. My info, Manolo Rojas Cel: +1(818) 272 7781 email: manolo@manolorojas.com Thanks to all ... Manolo

Hi Dan: Here is some: Arri Bl: Con Arri 35-3: Con Arri SR 1,2: Con All new 24v Models: If you are using the 11pin Fischer will be Con, But if you are using the RS 3pin Fischer Will be Mom. I hope this help. Manolo Rojas