GEORGEBIANCHINI

Hello everyone. For your consideration a superb piece of equipment. This is the KFX TECHNOLOGIES AURORA REMOTE HEAD. I purchased in late 2017. I have used this head with amazing results. This is one of the smallest non-stabilized 2axis remote heads.I am addicted to the ARRi gear head  and just "wheels" in general so this was a great addition to my kit when the shot setup didn't allow me to use a traditional head. I always put it on a dolly. or just put it on sticks or a hi-hat..plug in and GO. its also performs well in low wind straight arm crane or jib situations as well. No tech required. Please do some research on the company's website. This head works beautifully with primes and short zooms..it will struggle with a large zoom such as an 11:1 or 12:1..I do NOT recommend using it with large zooms. Stephen Scamell is the CEO of KFX he has promised me the new buyer of this head will get a "complimentary full comprehensive service and support" for this head. This is an amazing simple two axis head ..it will even perform not fully balanced it is so good. This was the first KFX head to go to 11..that is one more than 10. I do not not recommend going to 11 its just toooo powerful...dont even think about it. Now all of the KFX heads go to 11.

the head will be provided with the following:

(2) 50ft head cables

(2) joiner cables 

console with wheels

head complete with tie down and extension posts

 (2) custom hard cases

also included is all related power cords to power head

$32,000.00 OBO...buyer arranges shipping/ or pickup in zip code 12561 or in the NYC metro Area 

just email with questions

steadyg@me.com

sold! thank you everyone

A MINT RARELY USED PRESTON MDR-3 G4 BLUE DOT LR2 FOR SALE

$4,500.00 US

EMAIL ANYTIME AT

STEADYG@MAC.COM

OR CALL/TEXT

917.744.7614

Hello Everyone. A excellent condition XCS single antenna receiver. This is a chance to own a piece of XCS/GREG BUBB history. This was an amazing receiver that also ran on a 9volt battery...brilliant. $300.00 OBO buyer pays for shipping of their choice.

email me at

steadyg@mac.com

seriously will consider reasonable offers.

this is an original XCS standard video receiver. There are not many of these in the world. I predict collectible status somehow in a few years in a steadicam museum somewhere.

works well. takes a 9volt battery or dc/ac 4 pin XLR plug.

This thing was a perfect back up to the Custom Interface Technologies DX400. email me at

steadyg@mac.com

buyer pays shipping $250.00 OBO

PRESTON CABLE BLOWOUT $11 EACH.

buyer pays shipping.

all cables function perfeclty

all cables for the MDR-2

panavision genesis run/stop cable #4533 ( 2 of these)

panavision run/stop cable#4522

Aaton run/stop cable #4524

Sony VTR run/stop cable# 4435

email me at steady@mac.com

SOLD

Thank you everyone

Hello,

I need to rent a steadicam in Rome Italy the week of January 5-10. Anyone with information please email me directly at steadyg@mac.com

It needs to be a system that can accomodate an alexa with accessories. I prefer a PRO rig but I am open to any rig up to the task.

I need a complete system including sled ,arm, vest. It would be great if the vest is within the size range of an op that is 6'1"/175lbs.

Thank you everyone

decimator still availible

Thank you everyone

the only cables remaining are

#4435 sony

#4533 genesis (2)

#4522 pana

#4524 aaton

all cables now $20.00 each

Rarely used in box with all related accessories that were included in the box. I will include a custom Anton Bauer P-Tap power cable

$300.00

buyer pays shipping

Hello and Happy Holidays to all.

Preston MDR2 cable blowout sale. I just cannot stand having these around since I have switched to the MDR3

cable #:

#4543 RED cable

#4533 Pana Genesis

#4533 Pana Genesis

#4522 Pana

#4435 Sony

#4524 AAton

#4472 Pana power

#4477 GPI power 24" long

$30.00 each

$220.00 for the whole lot

will ship for FREE

Thanks for looking

Thank you everyone. Unit is SOLD

For your consideration a truly MINT MDR2 G4 Blue Dot upgraded. It is almost 1yr old and seldom used. Upgraded to MDR3 and no longer needed in my kit.

$4,000.00 US.

Cash or Check (will wait for funds to fully clear)

Buyer responsible for shipping costs.

Also availible for pick up in New Paltz NY

just email me with any questions

steadyg@mac.com

Cable #4699 and #4521 SOLD!

Thank you

THANK YOU! SOLD!!!

Marc I have truly MINT MDR2 G4 Blue dot upgraded unit for sale. call me or email

steadyg@mac.com

Preston MDR2 cables (start/stop cables)

#4543 RED Digital $120.00 OBO

#4435 Sony VTR $95.00 OBO

#4524 AATON $95.00 OBO

#4521 ARRI (3 pin) $95.00 OBO

#4533 GENESIS $100.00 OBO (I have two of these buy both for $150.00)

#4522 PANAVISION $120.00 OBO

MDR2 POWER CABLES

#4699 ARRI 24v (3 pin) $95.00 OBO

PANAVISION 24V (LEMO 2 pin herm) $95.00 OBO

GPI PRO STEADI (24") $75.00 OBO

GPI PRO STEADI (7") $75.00 OBO

All cables in excellent ++ condition. Only the ARRI one shows any use.

Buyer responsible for shipping

all prices are either half of what Preston currently charges or less

OBO means "Or Best Offer)

please email me directly at

steadyg@mac.com

Thank you and Happy Holidays to everyone

peace &love

peace & love

Preston CineTape Interface cable for all MDR-2. This item is less than a year old. Seldom used. Mint condition. Preston item#4542. original cost $620.00.

$420.00 OBO

Please contact me at steadyg@mac.com

payment via check (will hold item until funds clear) PayPal or cash.

buyer responsible for shipping fee's

Thank you in advance

Preston Integral Mounting bracket for DM-1X motor for sale. Preston item # 4308. Original price $370.00 Under a year old mint condition. Used once. $270.00 OBO

Preston Integral Mounting Bracket for DM-2 motor for sale. Preston item #4309. Original price $370.00. Under one year old mint condition. used once. $270.00 OBO

Please contact me at steadyg@mac.com

Payment via check (will hold items until funds clear) PayPal or cash.

Will not ship outside USA. buyer responsible for shipping fee's

Thank you in advance.

SOLD! THANK YOU EVERYONE

Case is sold

Thank you

A&J Manufacturing vest/arm case with wheels. dimensions are

16" x 17" x 30"

holda an arm,vest and spare parts easily

$100.00 US

all serious offers considered

buyer pays shipping

in excellent but used condition

For your consideration a PRO/XCS hybrid sled for sale:

PRO Donkey Box III

PRO Upper Junction Box (SD)

XCS 2" Carbon Fibre Post W/PRO Style Mounts (current style)

XCS Ultimate Gimbel

XCS Ergo Gimbel Handle

XCS Standard Camera Plate (qty:1)

PRO Lower Junction Box (SD)

PRO Battery Rack Gen II

PRO Rec. Mount

PRO Jumper Block Set (qty:3)

PRO Preston Mounting Bracket

PRO Sled Case

This rig has served me well. It is in great shape. If you have never experienced a 2" post, all I can say is, "remarkable". This rig is the best of both manufacturing worlds. SOLID/RIGID

PLEASE NOTE: This sale does not include monitor or monitor bracket. This is a NON HI-DEF SLED but ready for the upgrade.

I have serviced this rig myself yearly. I have assorted spare parts that will be included such as spare breakers and Gimbel/Donkey box tools.

$15,000.00 US

All serious offers considered

This rig is located upstate NY and will deliver into NYC gratis or buyer pays for shipping.

please email me directly at

steadyg@me.com

Hello Everyone,

Does anyone have a Pro 1.5" post with the current connector style laying around they would like to sell??

cheers

GB