Jump to content

Pete Barta

Premium Members
  • Posts

    65
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by Pete Barta

  1. WANTED EFP VEST in any condition sweat marks and all! Contact. Pete Barta petebarta@mac.com +61407747009 Sydney, Australia
  2. Wondering if anyone wants to part with their Transvideo CineIIIA Super Bright Monitor? Or would consider Transvideo RainbowII 6.5 Super Bright? You can contact me off the forum at petebarta at mac.com Thanks Pete Barta Sydney, Australia +61407 747 009
  3. Titan_Upgrade.pdf I also have a Titan and there is an upgrade available which not only extends the frequency range but changes the casing to a rubber type instead of the metal so helping to shield unwanted interference. Contact Transvideo or your nearest dealer about the upgrade. Don't quote me on it but it cost around Euro 200. I have attached a PDF of the new look Titan but what it doesn't say is you can upgrade to the new look shielding. I have been very happy with the product and also own a modulus but both have there strengths and weaknesses. Cheers, Pete Barta Also of interest. Titan? is fully compatible with Preston Cinema FI+Z system. Titan will not interfere with your Preston Cinema FIZ system. Regardless of the channels selected the FI+Z performance will not be affected. However, to insure a clear video image on the Titan Rx, we recommend the following settings: Titan Tx / Rx set on channel A (2415.5 Mhz), recommended channels for the FI+Z: 9 through 29. Titan Tx / Rx set on channel B (2427.5 Mhz), recommended channels for the FIZ: 16 through 29. Titan Tx / Rx set on channel C (2442.5 Mhz), recommended channels for the FIZ: 0 through 6 and 24 through 29. Titan Tx / Rx set on channel D (2457.5 Mhz), recommended channels for the FIZ: 0 through 12.
  4. Hi Claus, I'm not sure if this helps? I bought a pelican case 1750 from B&H $159 without foam and had it custom fit cut out not very expensive especially knowing it houses a pricey bit of kit my new MK-V nexus sled. I also think if you break the sled up a bit it has less chance of breaking under force and it takes less than a minute to setup. I attached a photo of mine and thanks to Guido Lux for giving me the idea. All the Best, Pete 'First ever virgin Post' Barta
×
×
  • Create New...