Brandon Zachary

For an extra $2,000 I’ll include a bottle of Pappy for you. :)

Here are case color options and also foam highlight color options. I have the blue, gray, and white case ready, so there’s no wait.

I worked with Innerspace Cases to design a whiskey and wine case for a customer of theirs and I'm now selling them if anyone is interested. Pick your case color, lid stripe color, pad lockable, etc. Turnaround time is two weeks due to customization. They can be ordered from www.barcases.com or send me a message. Case Features (all glassware is included): 4 x Glencairn Whiskey Glasses 4 x Shot Glasses 4 x Stemless Wine Glasses OR Rocks Glasses (Your choice) 1 x Corkscrew Slot 3 x Slots for 750ml Liquor Bottles (vertical position) 4 x Slots for Wine Bottles (horizontal position) Accessory area for napkins and other small items Retractable handle and wheels Dimensions: 18x17x16 Weight: 33 lbs Price: $995 + tax. Free shipping within the US.

Apologies if anyone sent me a PM, had my notification settings wrong. One last bump before it goes on eBay, make an offer

Price reduced to $3,650. PM me if interested.

Selling for a friend of mine. PM me if interested and I'll put you in touch with him. Package includes: - Kenyon KS-8 Gyro - Kenyon KS-6 Gyro - Kenyon KI-12-D 12V Dual Inverter Box - 2 x Padded Gyro Cozy Covers - Right angle bracket to mount both Gyros to camera - Storm iM2500 Case (not pictured) All works perfectly & in excellent condition. Price for whole package is $3,950. More pics available on request. Located in LA. Would prefer to sell as package but may consider separating items.

Hey Afton, I just sent you a PM with the serial number and his contact info.

A friend of mine is selling his Sony F65 on Ebay here. PM me if you're interested and I'll put you in contact directly.

Kurt, First of all, welcome! Not sure about the frying issues you've seen, but the two cables you need are below. Abel Cine Tech should have these in stock. Canon DR-E6 DC Coupler Switronix XP-DSLR-C Power Tap (Mfr # XP-DSLR-C) I've sent a few of these units to Terry West to shorten into the perfect length and he's done an incredible job. -Brandon

Mika, is your rig still for sale? If so, I'd love to check it out. Are you located in LA? Thanks, Brandon

PM sent.

their online shop is open.... http://shop.artemis-hd.com/en/Brackets/2/?cur=2 Thanks, George at GPI provided one of his plates that lined up perfectly!

I'm looking for a dovetail plate for the Sachtler Artemis. PM me if you have one you would be interested in selling. I could even be interested in renting if you'd prefer to hold on to it. Thanks! -Brandon

I find it helps if you have a short lightweight BNC cable connected to the camera and ran to the gimbal (and taped on) with a barrel on the end. Then run another lightweight BNC cable from your gimbal along your arm (one small piece of tape on each arm segment) and attach it to the back of your vest with a velcro strap. This will allow whomever is wrangling cable to simply attach and detach away from the camera and also helps with balancing. The other plus is that you can now dock your rig, disconnect the BNC at the gimbal and your free to roam around the cabin... Someone else might know of another trick though.

The Flyer should be able to hold an SR2 or 3 depending on lens choice, like super speeds with a Bartech/M-One motor and LMB5 matte box. I've flown a Red on my Flyer (with super speeds and the same accs) and while it almost maxes out the arm it is still workable. Granted you have to power the camera from the sled and get rid of a few luxury items...I'd recommend a bigger rig, but it is possible.