-
Posts
100 -
Joined
-
Last visited
-
Days Won
1
Posts posted by Marco Dardari
-
-
Garrett wrote in February 2007:
"Jerry Holway has agreed to help document the breakdown/assembly/parts replacement steps for G-50 and G-70 arms. Hope to have photos/text/diagrams as needed up on the web by the end of March, so these simple procedures can be done in the field with just a t-handle allen wrencn and a socket driver (and a cyclotron).
best regards and thanks for the good posts on our 'geo' arms.
Garrett Brown "But after ten years there is no document that helps disassembly the arm to clean it even because it is very exposed to external agents how it's done. It is very expensive to send it every time in USA or UK to service the arm.
-
Thanks Francisco, I also use ACF-50 but it's non enough , I need to disassemble it.
-
Hi,
I have a Tiffen G50x arm and want to make a maintenance,
does anyone know how to disassemble it step by step and which lubricant to use?
At least to clean the main bearings.
thanks
-
ah! ok, thank Jens ,but the other plate are it?
-
Is the Pro/Betz/XCS dovetail plate width (8,4 mm) the same for all?
Even the old 3a plate?
thanks
-
Philip, according to your opinion, what is the best monitor between transvideo 8" and SmallHD 703?I've been using the 703 with the yoke for the past week and I'm happy with it. I have not noticed any delay other then the one that always comes out of the RED Dragon to any monitor other then the touch screen.
It's a nice image we are going to run into the problem of DP's and Directors looking over are shoulder at it.
The screen is reflective I'm tempted to put an iPad anti glare screen protector on it but I have not yet. I have been outside in sun and overcast this past week in the tri-state area and out of the box it has been good enough for me to see in all situations.
I wish all monitors were water resistant because I hate rain covers. But this one is not.
There is not a way to turn off the image flip so when going to low mode the quick and dirty way requires the push of a few buttons. I have spoke to Small HD and they are looking into a fix for it.
All and all I'm happy with the monitor. I'm torn between buying the 503 to mount to the 15mm rods on the camera for low mode shots or buying a 2nd 703 so my back up monitor is exactly the same. I still have my cinetronic gen2 and the Steadicam/transvideo 8" high bright backing me up right now.
-
Hi Marco
Many thanks for your reply, I have not seen your websales e-mail as it was handled by Danny Hallett who has now moved on from Tiffen, this is also why you have not seen a reply. As I mentioned, I would appreciate an email to robin.thwaites@tiffen.com and we can resolve whatever the problem is.
Robin
Robin I sent an email to this address rthwaites@tiffen.com on March 20
-
Hi Marco
Many thanks for your reply, I have not seen your websales e-mail as it was handled by Danny Hallett who has now moved on from Tiffen, this is also why you have not seen a reply. As I mentioned, I would appreciate an email to robin.thwaites@tiffen.com and we can resolve whatever the problem is.
Robin
Robin I sent you a new email
-
Hi Marco
It is true I am currently in Dubai but only since this week, I have seen any e-mails from you. I am sure that you have my e-mail address from previous communications however if not please feel free to e-mail me at robin.thwaites@tiffen.com.
More than happy to sort out whatever issues you have.
Best regards
Robin
Hi Robin, I sent an email on March 16, as I'm sending from late February to Websales, Danny Hallett , and recently to other Tiffen staff but no one has answered yet. By telephone I trouble myself understood.
Because nobody answers me?
I wanted to mention that my order dates back to February 6
Best Regards
-
Sorry for the delay. I'm on a TV Pilot right now and so I haven't been online as much. Also, I'm sorry if I miscommunicated; I don't work for Tiffen. I will forward your concerns to the US rep out here in LA and see if he can help get the ball rolling for you in overseas. I'm sorry for the trouble you're having and I do hope it gets resolved quickly. All the best.
Grant, I did not understand, thanks for help.
-
Grant I sent you a message two days ago and have not received any answer, as I'm getting from your colleagues for a month
-
Stefano, lasciamo perdere, assistenza zero e tempi di spedizione biblici anche sull'acquisto di un accessorio, non ho parole!
-
Grant I sent you a message
-
I am really disappointed by Tiffen, I'm trying for a month to reach someone but they are all out of the office.
I don't know what to do
-
Looking for a used PRO Titan Arm in good condition.
(Europe)
Thanks so much.
-
-
Ask
Peter Hoare
-
It would be better that Tiffen well as sell their products also thought to assist its customers in after sales,
because it is possible that after four weeks I have not yet had the opportunity to submit my order: the replacement of waist band of my Ultra2 Vest!
-
so then,
I tried to order the waist band, I urgently because I can not use my Ultra2 Vest, but I have not received any answer from Tiffen, congratulations!Among other things, a part of the vest that has problems of construction, with the use tends to break, to someone more fortunate than I have been changed more than one, free ...Tiffen mistery -
no answer...for now
-
I try
thx
-
I broke the front plastic waist band, I'm waiting for two weeksand I have not had a response from Tiffen, and when I can not use the Ultra2 vest...are really angry!
-
Code number and photo, please
-
Ultra2/Clipper monitor roads are 16 mm
M1 Gimbal Adapter GPI Pro Sled
in Gimbal
Posted
And for Clipper3 sled?