Andre Trudel
-
Posts
146 -
Joined
-
Last visited
-
Days Won
2
Posts posted by Andre Trudel
-
-
$11,999.
-
A brand new Preston Hand Unit 3 brand new in the factory box. Never used on set. Comes with everything that Preston sends you.
Unit comes with:
A-E pre-printed focus marking rings
Blank white focus marking ring
2x FM-50 Batteries
FM-50 Battery JJ Charger
Depending on where you are in the world, this is close to $1,000 off for Californians.
Feel free to ask any questions. Located in Los Angeles, CA.
Price: $7,199 USD
-
The Hand Unit and MDR were just serviced at Preston. HU3 has a brand new Focus Knob and completely checked out. Everything is up to date G4 Blue Dot. This is a great deal for anyone especially those who don’t need a micro force.
Hand Unit 3 Just returned from Preston. New focus knob
Rubber grip and blank
MDR2 G4 Blue Dot +M
2x DM2 motors
6x HU3 Rings. Ai-Ei and a blank
2x Preston Motor brackets long
2x Preston motor brackets short
2x Motor cable right to straight angle
12v Dtap to MDR2 Power cable
Y Arri On/Off and power to MDR. (the only cable you really need in LA since most of the rental houses have intergraded this set up on their cameras, so I’m told)
MDR2-Arri 12v On/Off cable 4520
Panavision cable 4522
Red Digital cable 4543
MDR2 to 15mm rods mounting bracket. Don’t know who it’s made by but works well.
2x chargers that come from Preston
2x batteries. 1 large 1 small
Canvas Bag to hold cables
Brand New Palican 1450 case with foam. Perfect size for this kit
Feel free to contact me with any questions.
If you're in the LA area, feel free to come check it out. If you're not local, I can send a video or set up a face time.$12,799 OBO.
(Pictures had to be low rez to fit on the forum.)
-
-
Where are you located?
-
-
This cart has a couple nifty mods that allow it to pack up better then the stock version.
Filmtools currently sells their version of this cart for $1,825 plus tax.
This also comes with an extra baby pin and stand hanger.
I'm located in the Los Angeles area. Feel free to come check it out.
$1,200 obo.
-
Hello,
I’m looking for a Preston microforce to HU cable. If you are looking to sell a microforce with the cable, let me know as well.
-
Who made those gyro base plates?
-
-
I have one for sale.
-
I emailed you.
-
There's also that "clunk" that happens with the Pro gimbal when you transition from high to low mode and visa versa. It could be enough to cause vibration and would make sense that it happens when you're horizontal with the rig because that would be the transition point. The Pro gimbal was not designed to be used with the AR although it has been done.
-
I know this is a total long shot. I’m hoping that maybe someone with an older version of the Mk-v AR has done an upgrade or has a Preston AR controller box they no longer need. It was a small box that would allow a Preston Microforce to manually roll the AR cage.
Thanks.
-
Hi community.
I own an original Mk-v AR. I have all the external boxes with sensors, computer, etc. I’m looking for a way to manually roll the cage essentially overriding the AR. There are 2 ports on the computer labeled gimbal and command. Is there a remote I can plug in to the AR to accomplish this? I remember many years ago seeing a zoom control style remote doing this. Even earlier than that, I remember seeing a Preston motor controlling the cage. I can’t find any information on this now.
Thanks.
-
Looking for a Walter Klassen iBaird Low Mode Bracket for PRO Vest.
Thanks
-
-
Teradek Bolt Pro
1x Bolt Pro TX-SDI
1x Bolt Pro RX-SDI
1x DTap to Lemo power cable
1x Lemo AC power adapter (Multiple connections for Foreign countries.)
1x HD-SDI Coiled bnc cable
Teradek TX carry pouch
Multiple mounting hardware (See picture)I bought this a while ago and have never used it. I’m upgrading and no longer need it. As you can see from the pictures, it’s in extremely good condition.
Located in LA. $1000
-
You are correct; it is an internal issue with the v3. There's a bunch of information on the forum about it as Joel mentioned. At the time, Mk-v did an "update" called v3.5 that fixed the problem. I am still on a v3.5 and haven’t had any HDSDI issues. Have him contact Mk-v.
-
$150. I'll take it
-
-
-
Complete Preston II system for sale.
HU II with rubber handgrip. It was recently serviced by Preston and has a brand new Iris slider potentiometer.
Omnishot systems adapter to use NP style batteries on the HU.
2x Omnishot batteries. (Larger 3200wAh)
9x HU focus rings
Op/tech USA neck strap for HU
MicroForce zoom control with HU to MicroForce bracket
MDR II (Can be easily upgraded to G4 Blue dot to be used with an HU3)
3x Preston DM1 digital motors (two with the ticker more expensive gear and one with the standard size)
2x Preston motor brackets (different sizes)
1x Jerry Hill motor bracketCables:
3x Motor cables (Different sizes and styles)
Long Command cable for optional hard wired operation
Short MicroForce to HU cable
Long MicroForce to HU cable
Power to fischer 3 pin (I’m told that most rental houses in LA have this as a standard power option so this cable should cover almost every job)
Power to Anton Bauer P-tap
Power to 3 Pin XLR 24v
Power to Lemo FHG.1BCamera to Arriflex
Camera to Panavision
Camera to MoviecamBrand new in the box Pelican 1600 case with foam.
Not looking to break up the package at this time. Feel free to PM me with any questions. Located in LA
$9,299.00 OBO.
-
J-7 zoom control pin out?
in General Discussion
Posted · Edited by Andre Trudel
Good morning. Does anyone have a manual with the pin out to the old j-7 zoom controller with focus option? It would be a great help.
Cheers!