Andre Trudel
-
Posts
146 -
Joined
-
Last visited
-
Days Won
2
Posts posted by Andre Trudel
-
-
That was quick! If anyone else is selling one, let me know.
-
I'm Interested in a Steadicam Zephyr. If you're looking to sell, PM me with price and details. Thanks.
-
$1,700 for the package? 😏
-
-
This is a brand new, never used Gpi Pro low mode bracket. It came directly from the Pro factory this month. I just realized I dont need it.
Between tax and shipping to California, it would cost you $236.16.
Save some money and pick it up in LA at anytime. I believe Pro is currently closed for the Holidays.
Looking for $210.00
Happy Holidays everyone.
-
I don't think I'd sacrifice my regular drop time to facilitate just 1 minute of being inverted out of a 23 minute oner. If you can, try and design the 1-minute upside down shot so that the action happens within a frame you can hold.
While inverted, I would also put my operating hand higher ”up” (down) the post away from the gimbal towards your lower electronics housing to fight the pendulum effect of a “top” (bottom) heavy sled. Once you spin back, operate normally. This shot would also benefit from using gyros.
Just my 2 cents.
-
Where are you located?
-
Did this sell?
-
I picked this case up a few years ago for a pro 2 sled I no longer own. This is an original Pro sled case. Overall, it’s in pretty good shape. It does need to be re-formed but the ply is still in great condition.
Shoot me an offer. Barter, cash, beer are all acceptable forms of payment on this one :)
Cheers!
Located in Silverlake, CA.
-
Thanks for all the interest. This kit has sold
-
I'll take the tb6
- 1
-
-
GPI PRO 2 KIT
- GPI Pro 2 sled
- D box 3
- D box adjustment tool
- 1x Camera plate
- VZ Gimbal. Like new
- Gimbal tool and a few other extras for the gimbal
- Telescoping center post in amazing condition. Kipp handle version
- Pro V2 SD upper and lower J boxes. (It’s no secret; there are several reputable companies that do the HD upgrade for a reasonable price)
- Pro fixed monitor arm
- 3x All three jumper blocks
- Rigengineering Battery hanger with AB plates. The ability to move all three batteries fore & aft is amazing especially when using lighter monitors. Achieving dynamic balance is made easier.
- Pro Anvil Sled case. Needs to be re-foamed.
- Jerry Hill Gorelock 2” with docking clamp (New)
- Pro Vest. In great shape with the original Pro logo on the back. I’ve owned it since 2008 with very little use.
- 3A Gold springs arm. I bought it in March of 2014. Inspected by Robert Luna and given a clean bill of health. I upgraded to a Pro arm.
- Preston
- Hand Unit 1 (Newer version with the zoom bargraph and ZS ZR switch.)
- Wireless Transmitter
- 4x Focus Rings
- 1x MDR1 (3 channel Focus, Iris, Zoom)
- Pro to MDR bracket for DBox 3
- 1x back up antenna
- 1x DM1 motors
- 1x motor brackets
- 1x Omnishot (Allows you to use Sony style batteries on the HU. The generic batteries and chargers are really cheap.)
- 1x Fast Chargers with power cables (Does not work. You can use it for parts or get it fixed)
- 2x Preston batteries (They have not been charged in a while but worked last time I check.)
- Cables
- 1x Motor Cable
- 1x Pro power cable to MDR
- Run/Stop Cables
- 1x Red One Digital MDR Camera Run cables straight to right angle
- 2x Arri and movieCam 3 pin RS MDR Camera Run cable
- 2x Arri 11 pin Fischer MDR Camera Run cable Arri
- 1x Panavision 10 pin Lemo MDR Camera Run cable
- 1x 2 pin Lemo MDR Camera Run cable (It’s a 2 pin male/female Lemo)
- Digital copy of the Fiz Operating manual
- Transvideo Titan Standard Definition 4 channel Transmitter and Receiver Set. B&H still sells this package without cables for $2,659.95.
- Transmitter
- Receiver
- 1-AC adapter to 2 pin Lemo power cable
- 1-D tap to 2 pin Lemo power cable
- Digital copy of the operating instructions card. You can print it out and laminate the card.
- Anton Bauer 2 position charger/power supply
- 4x Anton Bauer Dionic batteries (1 holds charge. 3 need to be re-celled)
- Blackmagic Design Mini Converter SDI to Analog
- 3x Bondhus T handle wrenches for all the necessary adjustments
Everything works as it should and is in extremely good condition. This is everything you need to start working tomorrow just add your monitor. I’ve come to the realization that I don’t need two complete kits.
Located in Los Angeles, California
Price is $30,000 or best offer.
andresfilmworks@gmail.com
- 1
-
Price Lowered.
$450 obo.
-
-
Hill 435 Low Mode Bracket. This bracket sells for $635.75 shipped at
http://steadimoves.com/product/arri-435-low-mode-bracket/
Make me an offer
-
-
This bracket is in amazing condition. I was never able to use it because my set up was a 1.5” post with a Pro gimbal. If you own a large Steadicam sled then this is for you.
Comes with:
• Tiffen Steadicam Docking Bracket with 3/4" balancing stud and locking pin.
• Tool holder that screws into the side of the dock
• NEW never used Tiffen Steadicam Docking Collar for 1.685" posts (bottom post on Ultra & Clipper 24 for docking in low-mode; not sure what other posts it fits)
For clarification, this dock is for larger Steadicam brand sleds like the M1, Ultra, Clipper, etc. The balancing stud will not work on pro or 3A gimbal handles.
$535.00 OBO
-
Transvideo Titan Standard Definition 4 channel Transmitter and Receiver Set. B&H still sells this package without cables for $2,659.95.
Included:
Transmitter
Receiver
1-AC adapter to 2 pin Lemo
1-D tap to 2 pin Lemo power cable
1-12v 4 pin XLR to 2 pin Lemo
1-Pelican case for everything listed
Digital copy of the operating instructions
Asking $495 OBO
Located in LA
-
Good morning ladies and gentlemen,
I have a few broadcast items that came with my sled. I’m trying to get an estimate of what they are worth. Pictured below: 8’ triax cable with Fischer 1051 connectors, an HDTV 9’ jumper with Fischer 1053 connectors and end caps, and a custom made tally. The tally has two sections, the round “electronics housing” has LED’s around the entire rim for the camera, a 3pin lemo for power, (I have an Mk-v sled) a light sensor as well as a separate carbon fiber strip with LED’s for the monitor. I’d like to know the value of these items. As always, all information is greatly appreciated. Have a great day.
-
I do. Send me an offer. Cheers.
-
Wow! A whole kit for less then the price of the arm. Someone got a killer deal.
-
Where is it located?
-
What a great deal. Congrats!
Preston hu3
in Steadicam Marketplace - Wanted
Posted
Hello.
I know this is a long shot but I'm looking to buy a Preston HU3.
Thanks