Don Burton

Also, new prices on my remaining cables. $100 - Motor Cable. Straight to straight connectors. 36" length. $100 - Command cable. 25 ft. $50 - MDR Power cable to 3 pin XLR. 8 ft.

Microforce controller V + F Microforce to Hand Unit zoom cable (short) Microforce to Hand Unit zoom cable (25 ft) Hand Unit bracket $1500 total for everything All items work perfectly. This microforce, cables and bracket will work with all motors, hand units and MDR's. DM1, DM2, DM1x, HU1, HU2, HU3, MDR1, MDR2 and MDR3. I have done this and I have verified this with Preston that it is ok. For comparison, a new Microforce V +F3 costs $2350 new and a Microforce DMF2 costs $2750 new. Add in cables, brackets and tax, a new set up would cost about $3000-3400. Also, new prices on my remaining cables. $100 - Motor Cable. Straight to straight connectors. 36" length. $100 - Command cable. 25 ft. $50 - MDR Power cable to 3 pin XLR. 8 ft.

All of these items are SOLD.

Preston motor cable 90 deg to straight connector - SOLD

MDR bracket - SOLD NEW PRICES!!! Large Dog Bone Motor bracket - $125 Small motor bracket - $50 Custom Pelican case - $150

Iris Control Unit and cable - SOLD

It's easiest and best to contact me through email. I'm located in Manhattan Beach. Best, Don surfcam007 at yahoo dot com Iris Control Unit with 8' cable. This is nice so the 2nd AC can do an iris pull while the 1st AC is pulling focus. $150 MDR Mounting Bracket $150 Large Preston Dog Bone Motor Bracket with Arri and Pana bushings $200 Small Straight Preston Motor Bracket with Arri and Pana bushings. $175 MDR Antennae $20 Custom Pelican Preston Case by Innerspace $200

I'm selling off the remaining of my Preston stuff. I'm in Manhattan Beach. I'm not opposed to shipping but local buyers are my first choice. It's best and easiest to contact me through email. Best, Don surfcam007 at yahoo dot com Preston Motor Cable - 90 deg to straight. 40" length $150 Preston Motor Cable - Straight to Straight. 36" length $125 MDR Power cable Ptap. 36" length. $75 MDR Power cable to 3 pin XLR (arri). 8 ft. length. $75 Command Cable. 25 ft length. $150

Some people were asking so I just went to Preston Cinema today in Santa Monica for them to run diagnostic checks on the motor. Everything checks out good. If you're interested I can send a picture of the letter from Preston verifying. -Don Burton

I'm selling a DM1 Preston motor. Motor only. It is in good working condition and has served me well. I would prefer to sell locally but will consider other locations. Please email me. I don't check my PM's very often. $2000 -Don Burton Los Angeles surfcam007 at yahoo dot com

Last thing to sell. 85 set of Schneider 4x5.65 filters. 85 85N3 85N6 85N9 Bump $250 USD or best reasonable offer. surfcam007 at yahoo dot com -Don Burton AC/Los Angeles

Thanks for all of the interest. The Preston FIZ has been SOLD.

BPM Filter Set has been SOLD.

I'm selling a set of Tiffen 4 x 5.65 Black Pro Mist filters. 5 Filters total. I will not split up the set. Excellent condition. 1/8 BPM 1/4 BPM 1/2 BPM 1 BPM 2 BPM $1000 USD *I still have a Schneider set of 85's for sell. (85, 85N3, 85N6, 85N9). Make a reasonable offer on these. Email is the fastest way to contact me. surfcam007 at yahoo dot com Cheers, Don Burton AC Los Angeles

I was looking to sell last July but it went on a show. It's home so I'm looking to sell again. I'm willing to sell all or part of the kit, but if it's a partial sell it must be with the HU and MDR. For instance, I will not sell a motor alone but would sell 1 motor with the HU and MDR. Possible scenarios -HU, MDR, Batts, run cables, ... -HU, MDR, Batts, run cables, 1 motor, motor cable, ... -HU, MDR, Batts, run cables, 2 motors, motor cables, ... -HU, MDR, Batts, run cables, 3 motors, motor cables, ... -Entire Kit All reasonable offers considered. Email is the easiest way to contact me. Cheers, Don Burton AC Los Angeles surfcam007 at yahoo dot com Below is a complete list. -HU1 W/Microwave upgrade and LED zoom indicator -7 focus rings -MDR1 -MDR bracket to attach to a post. For attaching to camera. It has quick release capabilities. -Microforce with short cable to attach to HU Transceiver -bracket to attach microforce to HU -back up MDR and HU antennae -Remote Iris Unit -charger for HU batteries -3x HU batteries Motors -3x DM1 motors -short straight motor bracket -medium straight motor bracket -large dog bone motor bracket -XL dog bone motor bracket -4x ARRI bushings for brackets -3x Pana bushings for brackets -1x Pana iris motor gear -1x Fujinon iris motor gear Cables -3x straight to straight motor cables -1 straight to 90 deg motor cable -2x Camera Run cables 3 pin Lemo (ARRI) -1x Camera Run cable 11 pin Fischer -1x Camera Run cable 2 pin Fischer -1x Camera Run cable Panavision -2x MDR Power cable 3 pin Lemo (ARRI) -1x MDR Power cable P-tap -1x 8' MDR Power cable 3 pin XLR -30' Command Cable -30' Microforce Cable -8' remote iris unit cable Misc. -Pelican case with custom foam -HU neck strap -3x cable pouches

The ND set has been SOLD. Thanks for all of the inquiries. The 85 set is still for sale. -Don Burton AC Los Angeles

I'm selling a set of 4 x 5.65 ND's and a set of 85's. Excellent condition. I'd prefer to sell locally (L.A.) but will consider elsewhere too. -ND.3, ND.6, ND.9, ND1.2 ($400 USD for the set) -85, 85ND.3, 85ND.6, 85ND.9 ($400 USD for the set) Cheers, Don Burton AC/Los Angeles surfcam007 at yahoo dot com

I forgot to mention that the HU has a microwave transmitter and an LED zoom indicator.

Preston FI+Z For Sale This is from my personal kit. It has been well maintained and has served me well. Please contact me directly. Local pick up only. Sincerely, Don Burton/AC Los Angeles surfcam007@yahoo.com -HU1 -7 focus rings -MDR1 -MDR bracket to attach to a post. For attaching to camera. It has quick release capabilities. -Microforce with short cable to attach to HU Transceiver -bracket to attach microforce to HU -back up MDR and HU antennae -Remote Iris Unit -charger for HU batteries -3x HU batteries Motors -3x DM1 motors -short straight motor bracket -medium straight motor bracket -large dog bone motor bracket -XL dog bone motor bracket -4x ARRI bushings for brackets -3x Pana bushings for brackets -1x Pana iris motor gear -1x Fujinon iris motor gear Cables -3x straight to straight motor cables -1 straight to 90 deg motor cable -2x Camera Run cables 3 pin Lemo (ARRI) -1x Camera Run cable 11 pin Fischer -1x Camera Run cable 2 pin Fischer -1x Camera Run cable Panavision -2x MDR Power cable 3 pin Lemo (ARRI) -1x MDR Power cable 2 pin Lemo (ZLP style) Panavision -1x MDR Power cable P-tap -1x 8' MDR Power cable 3 pin XLR -30' Command Cable -30' Microforce Cable -8' remote iris unit cable Misc. -Pelican case with custom foam -HU neck strap -3x cable pouches

I recently moved and can't find my notebook with my Preston cable part #'s. I have an MDR-1. I need the #'s for -Camera (Blue) for an MDR-1. I think it's FGG 2B 308, but when I went look it up on Mouser.com there were 7 different choices with that part #. I need the specific #. -Power (Red). I think it's FGG 1B 304, but again the same issue. -Fischer 3 pin for Arri. if you have all the exact part #'s that would be even better or if there is some forum ref page. thanks, Don Burton

I made this set of cables for someone who ended up not being able to pay. Camera on/off cables for an MDR-2 MDR Power Cable (Pana) $145 MDR Power Cable (Arri 3 pin) $125 Camera On/Off Cable (Pana) $165 Camera On/Off Cable (Arri 3 pin) $125 Straight ? Straight Motor Cable $130 Straight ? 90 Degree Motor Cable $150 90 ? 90 Degree Motor Cable $165 I prefer to sell them as a set, but let me know if you want to split it up. -Don Burton surfcam007@yahoo.com