Johnathan Holmes
-
Posts
41 -
Joined
-
Last visited
-
Days Won
3
Posts posted by Johnathan Holmes
-
-
Hello everyone,
Clearing out some unused gear, I have this Anton Bauer TM4 Quad Charger for sale. Comes with North American power cable, functions great and cosmetically in great condition.
Price: $250 USD
Ships from Toronto, Ontario. Buyer pays shipping.
Thanks!
-
Still available.
Will let Virtual Horizon module go for $450 USD.
-
-
For Sale: Transvideo Virtual Horizon 3 (VH3) external Bluetooth level and XCS 2" Gyro clamp.
The VH3 is an external Bluetooth level that communicates exclusively with a compatible Transvideo CineMonitor. It features real-time shock compensation and acceleration compensation, whatever that means. It has worked extremely well with my Transvideo CineMonitor HD8 X-SBL, which I recently sold. I found this external level mounted on the post to be far more accurate and require less frequent calibrations compared to using the Virtual Horizon 2 internal level built into the CineMonitor.
Interested Buyers: Please make sure your Transvideo monitor has the appropriate Software version (v7.xx and higher) and compatible Bluetooth module installed. Compatibility with your monitor is your responsibility! This module only works with Transvideo CineMonitors!
Prices:
- Virtual Horizon 3 & Charging Cable ONLY: $600 USD
- XCS 2" Gyro Clamp: $200 USD
Shipping to USA: $40 USD
Shipping to Canada: $15 USD
Buyer pays shipping, Canadian buyers pay applicable GST/HST.
-
For sale: XCS LT Sliding Camera Plate, anodized grey, like new condition.
Rubber coating intact as new.
This plate will not fit into a Betz Wave! It will fit most top stages except Betz.
Price: $450 USD
Shipping to USA: $45
Shipping to Canada: $15
Buyer pays shipping, Canadian buyers pay GST/HST if invoice required.
-
Monitor SOLD.
Relisting VH3.
-
The Monitor and VH3 are pending.
The 2" Clamp will be re-listed in a new listing as it is available for purchase.
-
Gently used Transvideo CineMonitor HD X-SBL 8" Monitor with Red Knob for sale. Monitor is in good condition with a few minor cosmetic scratches. Currently has protective felt around the chassis. There is one small 1/4" scratch on the screen (see photos), but does not interfere with the image.
Monitor comes with Cam-Jam yoke already mounted, ready to attach to a Quattro rod-mount. The Cam-Jam yoke is mounted with adjustable friction mounts on either side of the monitor.
Also available is a Transvideo Virtual Horizon 3 bluetooth external level. This is currently mounted onto a 2" XCS Post Clamp and comes with charging cable to Vid/Pwr 4-pin on most bottom stages. The Virtual Horizon 3 communicates via Bluetooth to the CineMonitor its level and gyro information, and can be mounted anywhere. A much more accurate system than the Horizon2 built into the CineMonitor, with shock compensation.
Includes original Pelican shipping case, protective dust cover, as well as 8-Pin Monitor Power cable and BNC.
Pricing:
Transvideo CineMonitorHD X-SBL 8" w/CamJam Yoke: $3,000 USD
Transvideo Virtual Horizon 3 w/ 2" Clamp: $1000 USD
Canadian buyers pay applicable GST/HST.
Located in Toronto, ON. -
-
Selling my backup hard mount. Yes it's not much to look at but it works. One of the plastic wing nut caps broke off but shouldn't be hard to replace. Comes with tie down nut.Buyer pays shipping. Ships from Toronto.Price $400 USD.
-
1
-
1
-
-
-
Sold!
Record time!
-
Preston DM5 Motor and Jerry Hill PAM bracket for sale.
This DM5 motor was purchased directly from Preston in 2018 and is no longer needed in my kit. It is in virtually brand new condition, never consigned and used very sparingly as an occasional zoom motor. It is cosmetically in excellent condition and of course functions perfectly. It comes with a rosette and full Jerry hill universal PAM clamp, allowing it to clamp to any size rod.
Replace your aging DM2's with this great motor!
Asking $2,500 USD plus shipping. Ships from Toronto, Ontario.
-
Teradek Bolt 600 Transmitter & Receiver, plus Sidekick I for sale.
COMES WITH:
- Bolt 600 Transmitter with two long antennas, D-Tap power cable and coiled BNC.
- Sidekick Gen I Receiver compatible with Bolt 600
- Bolt 600 Receiver with 5 Antennas, XLR power cable and coiled BNC.
- Gold Mount Bolt 600 Receiver cradle, allows you to power the receiver from a gold mount battery.
- Carrying Case
This kit has very low usage. Originally purchased from the DVShop in Toronto in 2016 and barely used since, as most productions here have taken to the Boxx Atom system.
Great starter kit! Asking $1,500 USD. Ships from Toronto, Ontario.
-
-
Selling this Ward's Sniper Mk III in excellent condition. It is the full kit from Jon Ward that comes with a 17 and 5 degree Xylon, as well as the pan/tilt bracket to motorize the L/R aiming. The display box has been firmware upgraded to adjust the offset wirelessly. Comes in a custom Storm case with foam cutouts, and manual.
Tons of cables (Arri 24V, 12V, PTap, Panavision power, MDR Interface cables) Custom braided 3-Pin power/MDR interface thin combo cable with 90-degree connectors included as well.
Since switching to a Light Ranger and now LR2W, I have no need for this in my kit. Excellent deal. Purchased in 2016 for $13,000!
Asking $4,000 USD.
-
-
FOR SALE:
Mint condition XCS Ergo handle purchased in 2017. Used on one short job and switched to a straight handle. This is for normal (non-goofy) operators. Non-slip skin is in new condition, no hand oils or stripping. Comes with 5/32 allow screw.
Handle in pristine condition, as if new. Buyer pays shipping.
ASKING $950 USD.
-
Is anybody out there interested in a gimbal handle trade? I have a brand new Ergo handle (non-goofy) for my XCS gimbal and am interested in doing a trade for a standard handle. Looking for something in brand new or near brand new condition, as mine was purchased, tested once or twice, and not really used beyond that. It is essentially brand new. Message me if you're interested!
-
SOLD!
That was fast!
-
Hello everyone. I'm helping a fellow 1st AC sell his beloved Preston kit. This kit would make a perfect steadicam starter kit. This kit has been regularly maintained and serviced, and has been owned by one owner only, and never consigned to a rental house or subrented. It is very well looked after and has no issues. Motors run quiet. Seller recently upgraded MDR and motors, hence the reason for selling.
FOR SALE:
MDR2 (M+ and Blue Dot Upgraded*) - Serial#1842 - $2,200.00 USD
* When upgraded, blue dot sticker was not applied but unit is in fact blue dot upgraded.
DM1x Motor - Serial#3133 - $2,100.00 USD
DM2 Motor - Serial#4027 - $1,900.00 USD
MDR2 Mounting Brackets - 3 Brackets - $300 USD
- Rocket Surgery Alexa Handle Rear Mounted Bracket, Mk.I Lightweight Single Orientation
- Camera Positioning Systems Mk.I Spider Bracket w/ Arri & Panavision Dovetail Arms
- Camera Positioning Systems Mk.II Spider Bracket w/ Arri & Panavision Dovetail Arms
Cable Pack - Run/Stop & Power Cables - $500 USD
- 2x Arriflex Run/Stop MDR2, 3-Pin Fischer
- 2x Arriflex Power 24V, 3-Pin Fischer
- 1x 11-Pin Fischer 12V Power
- 1x Panavision 24V Lemo Power (1S.302)
- 2x Control Cables, MDR2, 10-Pin Lemo
- 2x Varicam/F55 Hirose Run/Stop MDR2, 4-Pin Hirose
Package Total: $7,000 USD
Would prefer to sell as a complete package and will entertain offers for complete package first, before breaking the kit up.
Buyer pays shipping and all applicable taxes and duties.
Located in Toronto, Canada.
Shipment via FedEx or Canada Post Ground.
HST/GST will apply for Canadian buyers.
Thank you!
-
I second this. Have done two features now with this system and the ability to change channels easily, and the durability of the signal through studio walls, on location, in concrete basements, is unreal. I wouldn't do another show without these. Even dealing with signal loss is noticeably better, it is a more gradual degradation as you lose signal as opposed to just a complete dropout.
I hope someone buys this, it is a fantastic price too!
-
SOLD. Thank you!
-
Still available. Some interest, but no sale. Make me an offer!
Anton Bauer TM4 Charger for sale
in Steadicam Marketplace - For Sale
Posted
It's still available.
$200 USD.