Joe Bullen

Steadicam Arm post for a Cinema products 3A Arm. Worn on the edges as has been used. Any questions please call Joe on + 44 7791 212263, or email joe@joebullensteadicam.com Thanks for looking.

This is an adapted top off a Gorilla stand that I bought from Arri Manchester about two years ago, (depsite the Panavision engraving!). Rather than use the brass captured spigot off the side- I had an wider aluminium spigot machined down at the end, (off a 2k as it happens) so my Hill docking bracket would be mounted over the centre of the post as opposed to being offset, (safe but looked scary). Dimension of the new spigot is 15mm and is a perfect fit for any Tiffen or Hill docking bracket. The other end of the cap is the standard 30mm lighting stand diameter. Any questions, please call Joe on +44 7791 212263. Happy to ship from UK, please call for quote. Thanks for looking.

My apologies! I have been away on a job and have just read this message!!! Argghhhh! I have just sold them- once again- sorry! Best Wishes, Kind Regards, Joe. Can you you check how much will be the shipping to Bulgaria (the cheapest royal mail ) Best!

Brand new Walter Klassen arm bag made from leather. This is used to cover the solid support arm that connects to the Steadicam arm; whilst the vest is in transit. £5.00 postage to anywhere in the uk. Please call Joe on + 44 (0) 7791 212263 should you have any questions or if you would like a quote for shipping the item abroad. $40.00. Thanks for looking.

Pelicase 1520 with padded dividers included. The interior of case is 'mint' as are the fabric divders, (these can be removed and washed in a washing machine if desired). All the provided dividers are included. The pattern of the dividers can be moved around inside to take account of whatever is to be stored in the case; they are attached with velcro. The outside of case is in good condition with a few marks from being in transit- but nothing deep. The second photo also shows the lid organiser- but the light wasn't great. This organiser is velcroed into the lid. To remove it just pull the lid organiser clear. To change the mounting points just rip out the old velcro tape just add more sticly velcro where you want to mount the organiser next. Case is usually around £100.00rrp and dividers £60.00rrp when new. Lid organiser about £35.00 on top of that. This case was used for TV camera equipment but is ideal for stills gear. I suspect that is what the dividers were designed for originally. Effectively, this is an (approximately) £200.00 case for £100.00, ex shipping. Any questions please call Joe on +44 (0) 7791 212263. Case shipped from Liverpool UK or can be picked up. Shipping is £10.00 to anywhare in UK. Call for shipping abroad. Thanks for looking.

Made by the original Allen Key patent holder- Allen Pal I think. Two sets- metric and imperial sizes. These were bought as a multi pack about two years ago form Costco. They have never been used, just rattled around in my tool case. This was because it was a huge pack and also came with sets of foldable keys which are of a lot more use to me. Unfortunatley I have lost the 2.5mm key which for the life of me I can't find. Any questions please call Joe on + 44 (0) 7791 212 263. Comes with a handy type knuckle arrangemnt shown in the photo that could be good for mounting to a docking stand. £10.00 plus shipping. Thanks for looking.

Cordura Case for Jerry Hill vehicle mount. No longer needed mount is stored in a Pelicase. Made by the case maker; CP cases. The Cordura is very tough and course on this bag. Virtually indestructable. It would make a great bag for a stills camera possibly. There are some tape marks on the top of the bag from where it was labelled with the contents. These will come off though with a little use of thinners. The bag is in mint condition and the second shot shows the accessory divider inside. Please call Joe on + 44 (0) 7719 212 263 should you have any questions, or if you would like a quote for shipping abroad. Thanks for looking.

Brand new Walter Klassen arm bag made from leather. This is used to cover the solid support arm that connects to the Steadicam arm; whilst the vest is in transit. £5.00 postage to anywhere in the uk. Please call Joe on + 44 (0) 7791 212263 should you have any questions or if you would like a quote for shipping the item abroad. Thanks for looking.

Relist again with new price. Standard Steadicam Arm bag for sale- excellent condition. £50.00 plus shiping Any questions please call Joe on +44 (0) 7791212263 or email joe@joebullensteadicam.com

Relist again with new price. This case was designed to hold the steadicam evolution post made by MKV systems UK. The case is hard but padded on the inside and covered with fabric on the outside. The corners are reinforced with vinyl on the outside, and the case has been lighly foamed inside so it would hold my particular post in a static position- though this foam can be pulled out. Approximate interior dimensions are: 86cmx 45cm; depth 18cm. Also included is a a smaller zip case that velcros into the main case, (as supplied) which is good for holding cables and brackets etc. Approximate interior dimensions are:35.5cmx 22cm; depth 18cm. The case is embroided on the outside with MKV's logo and website address. It closes with a wraparound zip, a velcro closing carrying handle in two halves- and two locked wrap-around integral straps. I am selling because my post now has a new monitor and won't fit in this particular case anymore. Any questions please call Joe on +44(0)77912212263 or email joe@joebullensteadicam.com £200.00 plus shipping. Thanks for looking.

x2 Pelicases. 1520 in Black. No Foam. Well travelled. £60.00 each or £110.00 the pair. £15.00 shipping per-case in UK. For questions and shipping quotes abroad please email joe@joebullensteadicam.com. or call +44 (0) 7791212263. Thanks for looking.

I am replacing the topstage on my rig, and selling the one below. The J- box seen on some of the shots is not included; it’s permanently wired up and cannot be removed. The post screws to the top of the rig using the standard allen attachment screws. Adjustment for balance is right/left on the stage itself and fore/aft using the geartracks bolted to the underside of of the baseplates. Three baseplates are supplied, and they have enough holes in them to match most camera types and can take standard 1/4″ and 7/8″ camera screws. Trim adjustments are made by the black dials shown. A friction lock secures the baseplate when the rig is balanced- but there is also an emergency lock recessed into the side of the stage to prevent release if the plate slips. Bars at the front of the top stage allowa J box and remote focus units/ redbytes etc. to be mounted. £850.00 plus shipping. Also advertised on my site www.joebullensteadicam.com,(one more shot included). Any questions please email joe@joebullensteadiam.com or call + 44 (0) 7791 212263. Thanks for looking.

Hi there. I have a mains converter for my Boland Monitor that I have just bought. I can't forsee a need for the mains power unit as the monitor will never be rack mounted, so I am selling. It's basically an IEC mains into the transformer and then a four foot(approx.)twinflex lead that connects to a four pin black XLR. Please see photograph attached. This unit can also act as a mains power unit for most pro-video cameras that have an XLR power in socket- the only thing the owner needs to provide is the correct lead for their country, with and IEC male on the other end. Any questions please email joe@joebullensteadicam.com. £40.00 plus shipping, Thanks for looking.

Eric, Really sorry I haven't replied- not checked out the WTB side for a while. Been busy- My apologies. I have backed away from remotes for now and have gone for a vest service. Thanks for getting in touch, Kind Regards, Joe.

Relist with new price. This case was designed to hold the steadicam evolution post made by MKV systems UK. The case is hard but padded on the inside and covered with fabric on the outside. The corners are reinforced with vinyl on the outside, and the case has been lighly foamed inside so it would hold my particular post in a static position- though this foam can be pulled out. Approximate interior dimensions are: 86cmx 45cm; depth 18cm. Also included is a a smaller zip case that velcros into the main case, (as supplied) which is good for holding cables and brackets etc. Approximate interior dimensions are:35.5cmx 22cm; depth 18cm. The case is embroided on the outside with MKV's logo and website address. It closes with a wraparound zip, a velcro closing carrying handle in two halves- and two locked wrap-around integral straps. I am selling because my post now has a new monitor and won't fit in this particular case anymore. Any questions please call Joe on +44(0)77912212263 or email joe@joebullensteadicam.com £250.00 plus shipping. Thanks for looking.

Relist with new price! Standard Steadicam Arm bag for sale- excellent condition. £70.00 plus shiping Any questions please call Joe on +44 (0) 7791212263 or email joe@joebullensteadicam.com Thanks for looking.

Hi There, Thanks for looking. I need lens remotes for focus. Hopefully these will come with all the relevant cogs and cables. I would hope to power them off my rig from a Lemo 1b connector; however if the deal is right I will get a cable made up. Please call Joe on +44 (0) 7791 212263 or email: joe@joebulllensteadicam.com. I am based in the UK. To see my rig please visit www.joebullensteadicam.com and view the on-set stills section. Best, Joe.

Relist with new price. This case was designed to hold the steadicam evolution post made by MKV systems UK. The case is hard but padded on the inside and covered with fabric on the outside. The corners are reinforced with vinyl on the outside, and the case has been lighly foamed inside so it would hold my particular post in a static position- though this foam can be pulled out. Approximate interior dimensions are: 86cmx 45cm; depth 18cm. Also included is a a smaller zip case that velcros into the main case, (as supplied) which is good for holding cables and brackets etc. Approximate interior dimensions are:35.5cmx 22cm; depth 18cm. The case is embroided on the outside with MKV's logo and website address. It closes with a wraparound zip, a velcro closing carrying handle in two halves- and two locked wrap-around integral straps. I am selling because my post now has a new monitor and won't fit in this particular case anymore. Any questions please call Joe on +44(0)77912212263 or email joe@joebullensteadicam.com £250.00 plus shipping. Thanks for looking.

Relist with new price! Standard Steadicam Arm bag for sale- excellent condition. £70.00 plus shiping Any questions please call Joe on +44 (0) 7791212263 or email joe@joebullensteadicam.com Thanks for looking.

Standard Steadicam Arm bag for sale- excellent condition. £100.00 plus shiping Any questions please call Joe on +44 (0) 7791212263 or email joe@joebullensteadicam.com Thanks for looking.

This case was designed to hold the steadicam evolution post made by MKV systems UK. The case is hard but padded on the inside and covered with fabric on the outside. The corners are reinforced with vinyl on the outside, and the case has been lighly foamed inside so it would hold my particular post in a static position- though this foam can be pulled out. Approximate interior dimensions are: 86cmx 45cm; depth 18cm. Also included is a a smaller zip case that velcros into the main case, (as supplied) which is good for holding cables and brackets etc. Approximate interior dimensions are:35.5cmx 22cm; depth 18cm. The case is embroided on the outside with MKV's logo and website address. It closes with a wraparound zip, a velcro closing carrying handle in two halves- and two locked wrap-around integral straps. I am selling because my post now has a new monitor and won't fit in this particular case anymore. Any questions please call Joe on +44(0)77912212263 or email joe@joebullensteadicam.com £300.00 plus shipping. Thanks for looking.

Hi Stefanos. I live in the UK and wouldn't ask you to bring it here! I'm looking for new arm with a higher load limit whic is why I am seeling my old Cinema Products 3A on here. Depends when I sell it really so I can get the cash. I'd like to make an offer of 7000 E. I realise this may not be aceptable to you; please let me know. Hope you are well and busy, Best wishes, Kind Regards, Joe joe@joebullensteadicam.com www.joebullensteadicam.com

Serial Number 667. Arm serviced by Bees Engineering , Harrow, UK, in 2009. All paperwork proof can be supplied right back to initial purchase in 2007. All bearings, hinges and moving parts were replaced with the exception of springs, pulleys and cables, (I have the old ones in a bag and these can be supplied if required). Also, the arm was cleaned and relubricated correctly. A much loved piece of kit that has got me through the early part of my Steadicam Career. Now selling as I am upgrading to a second hand Master Series arm that has a higher load limit, (this one has 56lb capacity gold springs which will get you through with most mainstream cameras). If you are planing to fly anything heavier like 3D rigs you will need to augment the arm with bungies. For small cameras (EX 3's and lighter), I have had weights made up so there is enough weight to engage the arm. You will need to have these made if you plan on flying anything lighter than, say, a DSR without a battery. Oh, apparently it was used on 'Aliens' as a mount for one of the Smart rifles seen in the film; but weren't they all? I have no idea how true this is so please don't hold me to it. Please see my site: www.joebullensteadicam.com for shots of the arm in use. Sold as seen; no other parts included. Please note that the small blue thrust bearing at the end of the arm is not included. Any questions please call Joe on +44 7791 212263, or email joe@joebullensteadicam.com. Thanks for looking.

This has been replaced by a new gimbal which has the grip permanently attached. This grip on this is tightened by the same allen key that adjusts most Cinema Products Steadicam arms, and the wrap grip itself can be slid under the gimbal once the correct drop-time for the rig is set. £100.00 plus postage. Paypal is OK. Any questions, please email: joe@joebullensteadicam.com.

Made by Marell and cased by MK/V, this monitor was originally supplied with the Evolution series. A 7″ composite Steadicam monitor, this unit comes with a MK/V/ Paddock mounting spud, and is in a brand new case. There are very few marks on it, but there is velcro stuck around the top edge so a hood can be attached. The four LED’s at the top of the case are ‘tally lights’ that can be used on a OB shoot when an eyepiece cable is a attached as discussed below. As well as the case, both the panel and the monitor driver components are brand new. Double click the pictures for more detail. Four dials on the back adjust the frame line generator, (X,Y axis) whilst linear switches adjust aspect ratio, brightness boost, impedence for certain camera feeds, and a reverse-scan option which can be very useful when operating ‘Don Juan’ style. There is also a picture-out BNC and a power-in socket on the rear so it can be used away from the rig if needed. Connection wise, the power and video signal from a rig can be supplied by a six pin lemo plug- or the signal by a BNC whilst using one of the other power-in sockets. There is also an ‘eyepiece-in’ (multipin) socket which allows a cable to be run from most video-camera eyepiece sockets, displaying the shot with the added benefit of peaking, zebras, tally lights, meters etc. Additionally there is a small lemo four-pin out socket which allows power and composite video be sent to either a transmitter or a recorder. This monitor tends to overscan slightly when used with certain cameras, so it needs to be checked against another reference before shooting starts with one particular type of camera. A good choice for a back-up monitor or for an operator just starting out; I am selling as I am updating to a full HD monitor. Techincal specs: 400 nits brightness, apparent RGB pixels: 1440 x 234, (true 480 x 234). Weight: 0.997 Kilos/ 2.2lbs. Please note the mounting bracket is not included! Please call Joe for more details: +44 7791212263, or email: joe@joebullensteadicam.com. £1000.00 plus postage.