Joel San Juan

Short wrap grip for the gimbal I meant. Thanks J

Forgot to mention the monitor bracket is for a 1.5" post. Thanks J

Hi All, selling the following items: Decimator MD-HX with Pro and D-tap power cables USD$200 - used twice, pristine condition, comes with original box if you want it. - mounting bracket included - cables made by Media Blackout XCS 1st Generation Monitor Bracket (1991-1994) Verified by Greg Bubb USD$200 - great condition and rigid - was replaced by the dual rod system for the crt monitors' weight, but now with light LCD monitors, it holds them nice and firm. just cannot stretch out that much - clamp itself is still interchangeable with the current XCS brackets and monitor spuds so can be used as a back up - or just so you can own 1 of only 50 ever made ;) Buyer pays shipping. All items located in Boston MA Thank you J

Unfortunately not. J

Hi All, Looking to purchase a used short gimbal grip for 1.5" post and a vehicle mount with a pro socket block. Kindly send me your offers. Thanks J

David Hable: crampedattic@gmail.com

Both items sold. Thank you J

Selling the following items: Cinetronic Telescoping Monitor Arm with 1.5" post adaptor and 6" rods. Lightly used and in excellent condition USD$150 Transvideo Monitor Slide Clamp with Silver Spigot (fits Pro and XCS ) Great condition USD$60 Items located in Boston MA, buyer pays shipping. Paypal welcomed. Thank you. J

Thanks for the link Rupert! J

Hi All, Helping a producer friend look for an AR op in Cape Town. Kindly send me any contacts should you have any. Thank you J

Thank you all, vest has been sold. J

Selling my lightly used back up Master Vest. All buckles and pads and the waistband have been recently upgraded to brand new ones. Pro socket block. Excellent condition. USD$2000 Buyer pays shipping, paypal preferred.

Oliver, here's a pic of Jörg Widmer with the Betz Churchill Bracket in low mode: http://latimesblogs.latimes.com/.a/6a00d8341c630a53ef0168e80c55af970c-600wi Hope that helps J

Hi All, Up for sale is my workhorse SD wireless video system from Boxx. It is one of the most reliable SD wireless systems in the world with superb image quality. It has served me very well and is in tip top condition. It's really easy to set up, just plug and play. PAL/NTSC. Boost almost 500m line of sight with the additional Panel Antennas that are included in this package. Extremely lightweight. It does have a slight 0.4ms delay so I use it together with the Behringer Shark DSP 110 to offset and sync. All you need is a decimator for HD cameras In the package: - Cobalt RX/TX - 2 Sets of Antennas - 2 Addtional ANT205 Directional Panel Antenna with solid L-joint connectors - 4pin XLR power cable - 4pin Lemo power cable (Aux) - ENG camera power tap cable - Behringer Shark DSP 110 Condition is very good and well taken care off. Great value with the items included. USD$600 obo Buyer pays shipping. More info: http://boxx.tv/products/cobalt/

Hi, I have 2 monitor arms for 1.5" posts for sale. One is a fixed length EFP style which needs some TLC to get some life back into it The other is an extendable 4" to 6" that will fit a Pro or XCS Spigot. I'm open to any offers. Buyer pays shipping.

Monitor arm and batteries still avail. Best offer gets it. thanks J

Sold thank you

Fits the Pro Post and for the GAD 1 Bracket. $50 Contact me on the forum PM Buyer pays shipping, thank you J

Selling the following items: Cinewidgets Low Mode Angled D Bracket with Quick Release Pin and 6" Pro Arm Post - SOLD 7" Fixed Monitor Arm for 1.5" Post with Kipp Handle, Spigot Included - Very Used Condition $100 2 AB Hytron 50 Batteries - Needs Recelling $80 for Both Contact me via the forum PM. Items located in Boston MA Buyer pays shipping. Thank you. J

Looking for a monitor arm for 1.5" post. PM me if you have one lying around. Thanks! J

It's a must have

Helping a friend look for a Delrin Spacer to clamp a monitor bracket to the inner post of the Pro 1.5" post. Thanks J

Thank you, all sold J

Hi All, Selling 2 sets of plastic marking discs for the Bartech Handset. These are extra that came from a set that I bought a while back. There are a total of 12 and am hoping to sell them as 2 sets of 6. There's one that has smearing (seen in the pic) There is also an extra one piece that is aluminium that I can throw in for free if you want it. USD$60 a set of six. Buyer pays shipping thanks. J

Hi all, I'm helping a good friend post this: 4 Axis Letus Helix in great condition. Selling to fund a new camera purchase. Sale includes the following: 1 x 4 Axis Letus Helix with wifi and bluetooth connectivity 1 x heavy duty Heavyduty camera plate 2 x battery and charger 1 x joystick control for pan/title/roll 1 x cut out foam insert for pelican case 1600 Original price: USD$5500 Selling: USD$4000 OBO Item is located in Singapore Buyer pays for shipping Contact me via the forum for more info or you can contact my friend directly at cstay1980 (at) hotmail (dot) com Thank you J Description: The Letus Helix is a one, three, or four axis modular camera stabilizer system. It utilizes the optical center of the camera for both balance and image stabilization. Originally designed to roll the camera on optical center, the Helix has evolved from a 1 axis auto-horizon system to a full blown, hand-held, 4 axis stabilizer. Balancing is a Breeze - Re-balancing the Helix after a lens changes is simply a matter of sliding a single axis forward or back. You can be back up and running without missing a beat.