jeromefauci

Hey greg sent you an email- I'm interested in the motors Jerome Fauci jeromefauci@me.com

Email me on jeromefauci@me.com Regarding the dm2. Motor Thanks Jerome Fauci

Sold

One Preston Red Digital RUN cable from an MDR2 (#4543) 149.00 One Power Cable for an MDR2 from any Panavision Camera(#4472) 149.00 EMAIL ONLY: jeromefauci@me.com

THE PRESTON COMMAND CABLE WORKS WITH THE MDR2 FOR EMERGENCY HARDWIRE USE OR WHEN WIRELESS TRANSMISSION BETWEEN THE HANDSET AND THE MDR IS IMPOSSIBLE. Must-have backup. 30FT (#4400) 195.00 CONTACT BY EMAIL: jeromefauci@me.com

This is the Preston Interface Cable for all Cinetape applications to MDR 2s g3/g4 Goes for over 600.00 new- asking 495.00- excellent cond ALSO TWO Other Cinetape Cables- NOT SHOWN Cinetape Power from Panavision: A 48" Interface power cable between Cinetape Measure control from a Panavison 2 pin Lemo accessory connector- sells for 240.00 new asking 120.00 Sensor Fischer 5 cable connector to 5 pin Fischer connector-28" Fischer Straight Five pin sensor cable-interface cable between the Cinetape measure control and sensor. Sell new for 240.00 asking 120.00 Contact: Jerome Fauci- by email only please: jeromefauci@me.com

This is the Preston Interface Cable for all Cinetape applications to MDR 2s g3/g4 Goes for over 600.00 new- asking 495.00- excellent cond ALSO TWO Other Cinetape Cables- NOT SHOWN 1-Cinetape Power from Panavision: A 48" Interface power cable between Cinetape Measure Control (3 pin Fischer) to a Panavison 2 pin Lemo accessory connector- sells for 240.00 new asking 120.00 2-Sensor Fischer 5 pin straight cable connector to 5 pin Fischer straight connector-28" Fischer Straight Five pin sensor cable-interface cable between the Cinetape measure control and sensor. Sell new for 240.00 asking 120.00

SOLD

Sale pending- thank you for the interest Jerome Fauci

This Arri Alexa Vibration- free plate replaces the short plates that have a very short foot-print that often leads to the camera vibrating on most steadicam platforms This plate screws in securely into the front of the Alexa and spans out to clip into the Alexa's Rear shoe for a tight and secure hold- I own three of these- selling the backup- includes TWO allen screw that attaches to the Alexa $250.00

This Preston FIZ Package Includes: Hand Unit 3 (w Six Rings, 3 Li Batteries, Charger, Grip Quick Release with G4 Transceiver) MDR-2 Motor Driver w/ Tranceiver G4 Antenna, Serial RS-232 Cable, Cinematic Precision MDR Flat Mounting Plate TWO- DM-2 Preston Motors with TWO FULL PAM Motor Mounts and Universal Arms, and TWO Preston Motor Cables This Kit was bought last year from Preston- like-new condition- $18,890.00 other cables and motors are available for addition cost Contact : Jerome Fauci by email: jeromefauci@me.com

Cinetronic Monitor Bracket from a Gen 1 monitor- complete with spud clamp block and monitor knobed screws- can be used with any PRO-MK-V or Like Sled- can fit Cinetronics Gen 1 monitor or any monitors that can fit in the dimensions: between 8.25"to 8.75" wide BY up to 10" Tall asking $225.00/o.b.o. Contact Jerome Fauci- email only: jeromefauci@me.com IMG_1748.rtfd.zip IMG_1746.rtfd.zip IMG_1749.rtfd.zip

price dropped to 75.00

The Dove Tail Mount Base is designed for a Dovetail mount plate and slides into either end of either a Yaeger Cart SR or JR Cart- allen screws are included- Dove tail plate is not included- this base goes for over 180.00 new- Asking $85.00 Contact : jeromefauci@me.com

STILL AVAILABLE contact : jeromefauci@me.com

SOLD-

PRICE REDUCED TO $495.00 Contact : jeromefauci@me.com

SOLD- thanks for the interest

This ARRI Eyepiece Telescopic Leveling rod is the standard piece of equipment for all ARRI eyepiece Products and all Aftermarket products that follow the ARRI standard- rugged, light weight perfect piece for anyone who wants to complete their Fluid Head or Gearhead Rental Kit. 12" fully closed to 28" full extension- cost $1,100.00 new ASKING $679.00 contact : jeromefauci@me.com

CONTACT: jeromefauci@me.com for more info

Pictures below

The Original and very versatile-This Vehicle Mount mounts to any Mitchell Mount on a Dolly, Hi- Hat, Bazooka , Shotmaker, and any moving vehicle with a Mitchell top casting- The Top section of the mount can also be dettached and fashioned with ubolts thru its pre-drilled holes for quick mounting to speed rail for motorcycle, golf carts and other autoshooting The INCLUDED Socket Block can be mounted on either Right or Left Side- The solid Aircraft Aluminum Thumb Screws are From The Walter Klassen Company, not the cheap plastic screws found on other mounts This item is like-new condition and comes with a Large T-handle Hex wrench for quick mounting. Asking $595.00

Thanks for the interest- But unit has been SOLD

Lowering price to $190.00 contact : jeromefauci@me.com

lowered price $190.00- contact me on : jeromefauci@me.com