jeromefauci

THE AJA HA5, IS THE PERFECT DOWN CONVERTER IF YOU ARE FLYING A DIGI SLR or RED Camera-or other Cameras that need to downconvert a HDMI signal to a SD/HD-SDI video signal for your monitor and your video transmitter The HA5 converts HMDI to SDI or HD-SDI- up to 8 channels of HDMI Audio- The HA5 provides TWO SD/HD-SDI outputs and supports long HDMI cables on the input. This unit goes for $345.00 New ASKING $229.00 Email Only: jeromefauci@me/com

The AJA- Hi5, converts SD Ior HD-SDI to HDMI for driving HDMI Monitors. Embedded SD/HD-SDI audio is supported in the HDMI output- The Hi5 provides 2-Channel RCA style audio outputs for seperate audio monitoring if need. The Hi5 also provides a looping SD/HD-SDI output useful for connecting additional equipment or mutiple monitors - like the steadicam monitors for "daisy Channing multiple monitors to the same SD-HD-SDI source This would be the prefered way to fly a Digi- SLR that has a Mini HDMI output that needs to feed into a HD-SDI video transmitter You will also need the next AJA Box I'm selling is the following AD Sells for $345.00 New ASKING $239.00 Email Only: jeromefauci@me.com

Photos are Below

This Betz Tool Deluxe Top Stage is the camera mounting platform of choice for PRO Sleds, MK-V, RIG, Old Steadicam/EFP, and just about any other Sled your experimenting with. This 100% vibration-free, super flat top stage includes a Quick and easy Camera mounting "QUICKLOCK" and safety Mechanism- also includes Fore/Aft Fine Adjustment Knobs ON BOTH SIDES of top stage, Built In Bubble Level, 15 MM Accessory rods ( to Attach your follow focus MDRs/Remote Controls or Lens Motors) ALSO includes a camera dove-tail plate w/ locking pins for ARRI Cameras. Made of Hard Coated Aluminium, and weighs 1.2 lbs (540grams) This Unit was bought new for $4500.00 for R&D to build a new Sled- that never came to be The unit is in Like-new CONDition Asking $ 2895.00 EMAIL direct Only: jeromefauci@me.com

emailed you

THIS PRESTON FIZ 3 G4 KIT INCLUDES: A HUIII G4 WITH HAND GRIP, GRIP COVER, SHOULDER STRAP W/: ONE- ZOOM FLAT PLATE ONE - UNMARKED LENS RING FIVE- MARKED LENS RINGS THREE LITHIUM BATTERIES TWO WALL CHARGERS TWO CIGARETTE LIGHTER ADAPTERS AN MDR II G4 W/: FIRMWARE UPGRADE CD FIRM WARE SERIAL CABLE ONE ANTON BAUER PTAP TO MDR POWER CABLE #4473 ONE PANA POWER TO MDR POWER CABLE #4472 ONE CAMERA ON/OFF CABLE FOR ARRI ALEXA/ ARRIFLEX/MOVIECAM #4521 ONE DM-1 PRESTON MOTOR WITH 1/4 " GEAR W/ PAM ROSETTE- DRING CLAMP AND PAM ARM ONE PRESTON 90 DEGREE TO 90 DEGREE POWER CABLE ONE DM-2 PRESTON MOTOR WITH 1/4 GEAR W/ PRESTON ROD AND SWITCHABLE INTERGRATED 19MM LENS BRAKET (PERFECT FOR IRIS PULLS ON ALEXA) EXTRA MOTOR BACK CAP FOR OPTIONAL PAM BRACKET SET ONE PRESTON 90 DEGREE TO STRAIGHT POWER CABLE TWO EXTRA PRESTON GEARS ONE IRIS GEAR ONE ZOOM GEAR 6 SCREWS ONE PELICAN 1600 CASE CUSTOM MADE WITH ALUMINUM INSERT STORAGE THIS KIT IS GUARANTEED LIKE- NEW WORKING ORDER- JUST CHECKED OUT BY PRESTON 9/12/13 IT WAS A BACKUP UNIT- LOOKS BRAND NEW- $17,859.00 WILL CONSIDERED SELLING AN ADDITIONAL PRESTON MOTOR, CABLE AND BRACKET FOR AN ADDITIONAL CHARGE- WILL CONSIDER OFFERING DIFFERENT POWER CABLES T0 SUIT BUYERS NEEDS PLEASE EMAIL ONLY TO: jeromefauci@me.com

The Single Channel SOLD- Thanks

BOXX KIT- SOLD- Thanks for the interest

contact Jerome Fauci on 310-809-4345

This Preston Single Channel was bought less than a year ago- and is still under warranty. Can be used with any existing MDR 2 with G-4. Was designed so a DP or AC can pull iris on on the same MDR simultanenously with the FIZ unit being used. Some ACs use this Single Channel to pull Focus because of it much smaller size and weight compared to the the HUIII FIZ. Either way its a great rental- since most Alexa Shows need to rent one to pull Iris from the DIT Tent, so its a great additional to your AC or Steadicam Kit. The Kit includes: Preston Single Channel Hand Unit Clear Marking Ring Shoulder Strap TWO Lithium Ion Batteries Fast Charger w/ AC or Car adapter Pelican Case Ditty bag I will be providing brand new batteries and charger to buyer I paid over 4500.00 for the kit- without the CASE, Shoulder Strap and Ditty Bag Asking $ 3800.00 Contact : jeromefauci@me.com

This Boxx Meridian HD Transmitter Kit is less than a year old, and still under factory warranty. This Custom Kit was designed by Steve Consentino of HD& Film Technologies for ease of use and trouble free operation- The kit includes: 1-Boxx Meridian Transmitter with FIVE 3dBi gain rubber duckie antenna, and Anton Bauer Mounts 1- Boxx Meridian Portable Receiver with FIVE 3dBi gain , Rubber Duckie antenna and Anton Mounts 1- High Gain Antenna with Anton Bauer Mount- this is the best & newest Receiver- just attach the above Boxx Meridian Portable Receiver and get flawest perception- Transmitter also mounts on the antenna for hassle free storage. 2- C-stand Adapters for the above High Gain Antenna- just unpack and mount the entire system in minutes Accessories include: 1- ARRI ALEXA Battery Adapter Plate- A must for transmitter to fit on back of Alexa 1-ARRI ALEXA Camera 12v power cable to Transmitter 1-4pin XLR to To Transmitte cable 10' 1-AC to 12v XLR power to Receiver 2- BOXX BNC to BNC Cables 1- Steadicam to Transmitter power cable 1- Custom Pelicam rolling Case -with lid pocket storage- for very easy storage and setup- 1- Owners Manual This easy to use HD Transmitter has become the industry standard for all HD Shows- great rental on its own or with your steadicam kit Paid $18,870 Selling for $16,500.00 contact: jeromefauci@me.com

Bump

Bump

Used this Ronford Baker Quick Release Plate with My Camera Cart, on the camera truck , and on a C-stand When I was doing a full day of Hand-held Camera Operating. (You can clip your camera on a Cstand and point it at the set while The DIT is "painting"- so you don't have to hold the damn thing when you're not shooting) In Great Condition- Sells for over $600.00 with plate- Asking $450.00 Contact: jeromefauci@me.com

Cinetronics made this Hand-held Monitor Mount, especially made for the Liliput monitor( Which are widely available and cheap-both HD and STD versions) One Screw removes Liliput. The hand-held bracket is Strong, Light, and has a built-in power connector (via Lithum Batteries-included) Includes Two Lithium Batteries and Fast Charger, and Protecting monitor Hood Paid $750.00 Asking $450.00

PRO ARM HEAVY DUTY (BLACK) SPRINGS- Never Used. Be Prepared for those Heavy HD Camera Jobs PRO Sells these for over $2000.00 Each I'm Selling One for $1,295.00 or BOTH for $2,450.00- With Both-I'll send you the Original Case. Contact : jeromefauci@me.com (310) 809-4345

The Gorelock 2 as the same features as the Gorelock 1 but can receive a 1.5" Post or a 2" post. No clumsy, time consuming air craft pin needed to Dock your Rig. Just land on the Gorelock -slide -and it locks automatically and stays leveled and rocksteady- no matter how many accessories your AC puts on and off the camera. The Gorelock 2 is attached to the Hill Balance bracket- an adjustable , two-headed balancing rod for your gimbal to adjust your rig's "drop", spin balance , or shoot right off the bracket. The rod slides into place avoid the annoying "spin the bracket " game of the old style docking brackets. The rod also doubles as a place to hang your vest. The unit comes with a tool holder and an arm hanger or FIZ holder that swivels easily to either side. see: www.steadimoves.com for more details on the GAD 2 NEW This complete docking bracket lists for $975.00 with one Post Ring This Gorelock 2 is in excellent shape and includes one ring - asking $695.00 Contact : jeromefauci@me.com

Free shipping within the US included Email for more info: jeromefauci@me.com

PRO ARM HEAVY DUTY (BLACK) SPRING CANISTERS- FITS ALL PRO ARMS- These Canister were backups- like new- PRO sells these for over 2K EACH ASKING $1250.00 EACH or $2200.00 for the pair ( comes with original case when both are purchased) contact: jeromefauci@me.com

SOLD - Thanks for the inquires

ANY ONE INTERESTED IN THE PRESTON FIZ 3: I WILL BE TRAVELING THIS WEEK- So Please contact me via email : jeromefauci@me.com or text :310-809-4345

Finally a Preston FIZ HUIII is available. Don't let anyone tell you different - buying a Preston System one or two is a waste of money- all of the older Preston Products are no longer being made and are not compatiable with the current Preston Products- The only good investment is to bite the bullet and buy the Preston FIZ 3 G4. As you read this, however, the waiting list for a New one is several weeks and Preston Cinema just raised their prices- This FIZ for Sale is one year old and has been checked out by Preston and given the latest update firmware ( July/2012) -The Hand Unit 3( as shown below) includes everything a new one comes with: G-4 Transciever, 6X rings, 2X Liion Batteries, Charger, Grip also includes as Extras; 2X more Lith-ion Batteries, One more Charger, grip cover, shoulder strap, grip cap. -MDR 3 channel Motor Driver w G4 Tranceiver- includes everything a new come with: G4 Transceiver, Antenna, Serial RS-232 cable, Firmware but also includes as Extras: TWO - MDR Power cables from: Panavision & ARRI Cameras TWO- Run ( on/off) Cables for Panavison & Arri Cameras One- CINE TAPE interface cable to marry the Cine Tape to the smart lens system ( cost $600.00 new and a must for AC's with HD cameras) -THREE PRESTON DM-1 Digital MOTORS (one of the DM-1 Motors can be replaced by a DM-2 motors if you wish) These Preston Motors were all checked out by Preston in July 2012- and were updated and modified as needed The Preston motors includes Extras: THREE- PRESTON MOTOR POWER CABLES THREE -15mm Preston Rods 32 pitch Gear 48 Pitch gear 64 Pitch Gear THREE -HILL PAM SYSTEMS THAT COVER 15mm, 19mm and 5/8 " rods includes a "fit-all Hill universal Arm A Panavision Modular Motor Bracket (rodreguez bracket) Offset PAM D-ring -PLUS EXTRA STUFF: A new Modular 51 FIZ case- perfect for quick draw setups on set- instead of your AC throwing your gear into a canvas bag! A Rain/ Dust cover that enables the user to control the Hand Set unit in dust and rain Owners Manual Will guarantee that all pieces have been checked by Preston Cinema and are in Like-new working order asking $20, 595.00

SELLING TWO Anton Bauer DIONIC HC Lithium-Ion Batteries w/ 91 Watt Hours, 14.4VDC, 10 AMPS, Real Time LCD- at 1.8lbs (800 grams) the Anton Bauer HC has the best power to weight ratio- perfect for Steadicam- Handheld- or On-Board Batteries when trying to power up such power-eaters as the ARRI Alexa and The Panavision Genesis. These HC Batteries sell for close to $500.00 new- One of the batteries available was bought for demo purposes last October 2011 and has gone thru only 19 cycles and is still on warranty- Asking $365.00 The Other HC Battery was purchased about two years ago- just past the warranty - it has been thru 76 cycles ---asking $260.00 email: jeromefauci@me.com for more info

The Anton Bauer D-2722 Battery Charger is A/B's most advanced charger to date- This Dual Station Charger includes a DDM module and a 70 Watt AC power supple. and is one of Anton Bauer's interactive 2000 series. Completely compatible with all current and future Gold Mount Batteries. It includes Auto balance & rejuvenation modes (for batteries that have been drained for long periods of time) Life saver maintenance modes & LCD display the reads Batteries charge status, available capacity, % of maximum charge, Battery Serial number, Voltage , Internal temperature & more. This charger sells new for $1300.00- Also includes: TWO Anton Bauer Dionic HC lithiun-Ion Gold Mount Batteries with 91 watt hours, 14.4 DC, 10 amps, and Real Time Display read out- at 1.8 lbs (800grams) these are the best weight to power ratio Batteries Anton Bauer makes- Which makes them perfect for Steadicams, On- boards for HD Cameras and Hand-Held use. These batteries sell new for $500.00 Each. These batteries are Two years old -but have ben used sparely with a video transmitter system. Also including a Anton Bauer Dionic 90 Lithium Ion battery w/ real time display- still in great shape and perfect for an extra accessories- like a Cam Wave or on-board monitor- this battery sells for $400.00 new asking $1250.00 for this entire kit- email: jeromefauci@me.com

Selling TWO PRO ARM Heavy Duty Spring Canisters- My Back ups- used a couple times- they sell new from PRO for $2200.00 Each- asking $1095.00 Each Also Selling a titanium Socket Block as a spare or for vehicle mounts- the older original socket blocks that come with the PRO ARM are not titanium and have failed or sheared off in the past- PRO sells them for $2255.00 asking: $ 1275.00 email me at : jeromefauci@me.com