Jump to content

Andrea Zoli

Premium Members
  • Posts

    9
  • Joined

  • Last visited

Reputation

0 Neutral

About Andrea Zoli

Recent Profile Visitors

1323 profile views
  1. Set focus remote Benz 5600 analogic 9ch 434mzh, modified for working also in 3D. (The modifies, done from factory, refers to use the second way on the rx (iris) like a focus copy. When you turn the knob, all two ways moves identically.) You may use this system only for focus or iris control if you prefer! The set contain: one Tx, one Rx (modified for 3D), four focus scale rings, five motor cables, two rubber antennae one power cable, manual operating (paper or PDF). This system work perfectly and all parts are in good shape. It works with 9volt battery Price US$ 2.000,00 + S&H Item located in Italy. Questions at steadicam@tin.it
  2. Hi all, yes this mode is heavy but not so much, in kilos around 30 (I've gold springs arm's). the cmas works separatly (I choose which using the switch upper the low mode plate). The signal goes is wireless (I don't rec with the Sony 790). The PDA on my arm is for the shoots, the show is long 2 hrs (not consecutive for me!!!). Using the start up camera I've the tally (the "on air" red light!) yet. The system cab be improve it. Next time I'd like to remote the focus on all 2 lenses with a BEN FISHER modified system and if possible using an only monitor and an only J-7. Andrea Zoli Forlì - Italy
  3. The PDA is for to know when and what to do the movment and if in high or low mode... I using powerpoint and the shots was basic slides; one touch on the screen for viwe the next slide/shot. What's the PDA on your arm for? <{POST_SNAPBACK}>
  4. Hi guys recently I've worked in a tv live program with many childrens. This program is very famous in Italy and in Europe, is a competition between young singers, the title is "Zecchino D'oro". Works with the childs is very fun but they're not all tall and so I've build this sled. The low camera is for the childs, the high camera is for the classic television movment. Andrea Zoli (this is the 2nd try... I hope that the picture arrives)
  5. Hi guys recently I've worked in a tv live program with many childrens. This program is very famous in Italy and in Europe, is a competition between young singers, the title is "Zecchino D'oro". Works with the childs is very fun but they're not all tall and so I've build this sled. The low camera is for the childs, the high camera is for the classic television movment. Andrea Zoli
  6. Hello, anybody knows where I can find a new (or used) HV-unit for my CP IIIA? Thanks at all Andrea Zoli
  7. Hi Christopher, I've that monitor but I don't have the electric buble. If you are intersted to sell it write me, if no put a bid for my monitor PRO I. steadicam@tin.it Very best Andrea zoli
  8. Thanks at all for your answers. The focus "leave" the monitor after 8/10 minutes, not immediatly. If I turn the pot, the focus change. I've bought a new bulbe for try, but the problem is remain. With the old bulbe (original for the CP factory) when the image is soft, if I knock (light) on the main the focus come back and the image is good too. This is very strange 'cause with new bulbes this don't happen, when the monitor lose the focus I must turn off and restart. I've bought an air cilynder and using the CFC I've spray on some components but nothing, the problem is not in the hot. I've thought it was the batteries voltage (two batts gives 15 volts) so I've done a new try with a supply voltage stabilized and I've seen if I give 12,5 / 12,9 volts, the focus is good and stay still. I've checked the 20 volts too (on the HV circuit) and it was perfect (only on a rig, on the second rig the voltage was 23,1). Andrea Zoli Forlì, Italy
  9. Hi Brado, thanks for your answer. I've done that (it was the first attempt) but the knob is in the end position. The focus leave after 8/10 minuts, not immediatly when I start the monitor. Thank you very much.
  10. Hallo guys, I'm from Italy and I've two old CP's sleds: a IIIA and a III. Recently on all sleds the monitors loses the focus (unlucky?). I've changed the focus tube but the problem is remain. Anybody knows the problem and can help me? Please answer me quickly, I've the screwdriver in my hand :o About the level Mr. Ben Fisher build a nice and cheap electric level for all monitors. See the site www.unitcine.com Very best Andrea Zoli (don't decieve, I'm a boy) :)
×
×
  • Create New...