-
Posts
36 -
Joined
-
Last visited
Posts posted by Will Eichler
-
-
Bumping this up. Price reduced to $4,500.00 USD or best offer.
One more thing I realized I have to throw in - I have a rain jacket with a slit cut in the back for use over this vest. It saved my butt on a rain bar night and should go with this piece.
Cheers!
Will
-
Up for sale is my Klassen Universal vest. I purchased it in 2012. It is serial number 341.
The vest comes with:
- a drop arm for conventional operating
- both bags
- tools
- two spare ratchet and straps
- instruction manual
- EZ Rig converter (this takes the place of the arm and lets you us an EZ rig spar with your own vest - I almost kept this vest just for that!)
I'm 6'2" and have weighed between 215 and 240 when wearing this vest and it has worked great.
Since these are very fitted vests, I will offer you the right to return if it doesn't fit, the shipping being your expense.
Asking $5,000.0 OBO. Currency in US Dollars.
Pictures available on request. Direct any questions to will (at) williameichler (dot) com
Thanks for looking!
Will
-
Email Sent.
-
Magdock and SR-2 bracket Sold.
Modulus 2000 and cables still available.
Thanks!
Will
-
Getting gear organized on hiatus and find I have a few items I don't use:
- Magdock - This is for the 1.5 OD rings of the first generation. $150.00 almost new
- SR1 & 2 low mode bracket. This was the sturdy type that replaced the handle instead of screwing onto it. - $40.00
- Modulus 2000 - This was my back-up to my 3000. I'm keeping the 3000 as a back up. It was serviced in 2010 by Cramped Attic and not used on a job since. It has only been tested. It is now in excellent working shape and comes with the antenna and cables for CP 4-pin Hirose, Pro, Panavision, Arri 11-pin and 4 pin XLR. If you still have a SD monitor, this is a great unit to send an image with. $300.00 OBO
Buyer pays shipping. I take paypal or check. I check here occasionally so it may be better to write me at will (at) williameichler (dot) com.
Best,
Will
-
Eyepiece tap sold. All the others still available.
Best,
Will
-
Hand Unit SOLD.
Thanks!
-
Preston Hand Unit 2 with the following:
- Hand Unit 2
- Hand Grip
- Hand Unit to Microforce bracket
- 3 Preston batteries
- Preston battery charger with power cable
- 12 marking rings
- Omnishot System adapter for Sony M batteries
- G3 Board for MDR-2 to work with the Hand Unit
- Pelican 1600 case
Photos on request.
Asking $1200.00 OBO.
Contact me here or at will (at) williameichler (DOT) com
Best!
Will
-
Hi all,
Doing some spring cleaning and found four items I don't see using agian so.....
1. SR-2 Low mode bracket - This is the type the repaces the handle of the SR-2. $25.00
2. Modulus 2000 - I had this overhauled and upgraded to taking a 24vdc power source by Dave Hable at Cramped Attic in 2010. It might have been used 3 times since. It comes with antenna, 11 pin Fischer cable, Arri 3-pin cable, Panavision, Pro cable and a Hirose 4 pin cable. $300.00 OBO.
3. Russell Eyepiece tap with Watec Black Widow camera - Comes with one power cable and the diopter that adapts this from 16mm to 35mm. $200.00
4. AJA HD10A HDTV analog to SDI converter - Comes with Anton/Bauer D-tap power cable. This unit was converted to run on 12vdc. $200.00
Pictures are availabe upon request. Shoot me a message here or email me at will (at) williameichler (DOT) com
Thanks!
Will
-
Aaron,
Email sent. I didn't see the whole message on my email. I got your location. Shoot me an email back when it's convenient.
cheers,
Will Eichler, SOC
-
Bumping this up. Asking price reduced to $6500.00 USD.
Cheers,
Will
-
How can you be contacted, Joshua?
Will
-
Hi all,
Up for sale is my SteadyRig arm. It is #003. Included in the sale is:
Arm
10" arm post and clamp
6" arm post and clamp
Crank wrench
Arm Bag
The arm was serviced by Hugo about 18 months ago and had all new bearings and arm covers installed. It is in excellent condition.
I'm attaching an overview photo. If you want detail photos, please request specifics. The arm is currently located on location with me in Chicago.
I'm asking $7000.00 USD or best offer.
Thanks!
Will
- 1
-
Looking for an MDR2 and 2 motors to complete a kit. It you have part or all, email me at will (at) williameichler (dot) com.
Thanks!
Will
-
For Sale:
Sony PMW-F3
SN: 100-842
340 hours on the camera
Comes with:
- Body
- Current firmware
- CBK-RGB01 S-Log RGB/4:4:4 upgrade (transferrable via SxS card it came on)
- 2 batteries – BP-U60
- Battery charger – BC-U2
- GripTech base allowing 15mm rods to be attached
- Berkley Systems top plate for mounting to the top of camera
- 2 – 16GB SxS cards
The photo shows all of the above listed, except the CBK-RGB01 upgrade SxS card.
I’ve had it for some personal projects that have been pushed to the side by regular work. I don’t see getting to any personal projects this year.
If you’d like an inspection, please suggest a known rental house that you could do it at. We can work out the details from there. I’ve bought used gear before and would expect the same myself!
I’m asking $8250.00 OBO, plus shipping costs. Please send any questions for information or offers to me at will(at)willliameichler(dot)com.
Thanks for looking.
Will
-
Hi all,
I have the Juiced Link DT454 XLR adapter for the 5D/7D/etc that I'm just not using. It comes with the original box, jumper audio cable to connect to camera, hex key that came with it and a printed version of the owner's manual (pulled that off the web).
The unit lists for $419. Mine has less than 10 hours recording time on it.
Asking $300.00 plus shipping of your choice.
Drop me a note at will (at ) williameichler (dot) com
Thanks!
Will
-
When I had an EFP, Brant Fagan helped me with a lot of upgrades for it, both electrical and otherwise. Put him in the running as well.
Best,
Will
I am interested in upgrading the wiring of a recently purchased EFP Sled. Anyone on the east coast doing this type of work?
Any suggestions on who I should contact?
Thanks,
Adam Keith
-
I have one I can let go of now that I only have one BFD. Let me know if you are interested.
Will
-
I guess that about says it all. I'd prefer it with the arm that allows follow focus units to mount to the front.
Please contact me at will (at) williameichler (dot) com
Thanks!
Will
-
I found a funny typo in the manual! It tells you where much of the wording came from. On page 28 is the list of "Supplied Equipment and Accessores." The first three things on the list are the SCOUT sled, arm and vest.
Funny.
Wil
Andrew,
Haven't really looked into that. The only camera I have flown with iris rods so far is a Canon 5D and we used a Redrock Micro baseplate and extended rods, so that we could mount an A/B Hytron battery on a plate behind the camera for extra mass up top (I also used my 6.5lbs Janice Arthur weight plate and a Manfrotto QR).
So, I don't know of bolt-on solution to the rods deal, but I feel like someone must have that answer...when I bought my used Flyer the wedgeplate was marked on the front underside with the words "Letus rods" in china marker by the previous owner. So, it wouldn't surprise me if the existing hole pattern on the wedgeplate is designed to match with some existing bracketry.
Perhaps the folks at Tiffen know.
-
Louis,
I had a similar issue with my Camwave. Element Technica was able to set me up for my needs.
Hope this helps!
Will
Hi Everyone
I am looking for this Male V-lok place if you know who sells it please let me know .(Not the np1 plate )and yes I have contacted Boxx.
Thanks
Louis Puli
Or, Element Technica
-
Rob,
Alec provides great advice. Get two.
Alec,
Say hi to Mr. Insley for me, please!
Will
Robert,
With HD taking over, I'd say the iris option is no longer an option but a must have. On our show, the DP always has iris motors hooked up to ALL cameras and controls them from video village.
-
Looking for one of the old 3" grip wraps for a 1.5" post.
Thanks!
Will
will (at) williameichler (dot) com
-
I 2nd Alfeo. In addtion to what he's said, I've never met an elevator I can't get the JR on. Not so watching friends with their seniors.
Good luck!
Will
Preston DM-1 FS
in Steadicam Marketplace - For Sale
Posted
For sale is the long time third motor from my FI+Z kit.
It's a DM-1.
Cosmetically it's an 8. Functionally it's a 10.
Included with is it a Hill Preston Motor Mount.
Asking $1400.00 plus shipping. I prefer to ship via Fed Ex but you make the call.
Payment can be Paypal or Money Order. If I know you, we can also arrange a check as well.
Message here or email to will (at) williameichler (dot) com
Thanks for looking!
Will