John Ritter

Hi Micheal I have 4 Hytron 50 Batteries with fresh new cells in them, $100.00 ea I can also recell yours for $100.00 ea My batteries come with a 90 day satisfaction warranty/12 month prorated. I also Repair/ReCell/ReFill any of the Anton Bauer Batteries plus many others. Let me know if I can be of assistance. Regards John Ritter 954-557-9765 Direct Email: siebold35@hotmail.com

Hello All I just got around to reading this Thread, Figured I may as well jump In. I Re-Cell/Re-fill/Rebuild the full line of Anton Bauer Batteries from ProFormer to Dionic. There is no great mystery to a battery refill/re-cell as just about every manufacturer use's standard size individual battery cells to build their pack designs. The installed electronics handle safety and current limitations for both discharge and charging plus other features such as load/time calculation, battery memory storage and communication with the charger/camera. During a Re-Fill/Rebuild none of the original electronics are changed or altered, only the cells are replaced, (kind of like when you gas up your car when it is on empty, your car does not know the difference between gasoline brands you can use Mobile,Chevron,etc and your car will work just like it was manufactured to do) Now there are variables with cells such as wattage rating, discharge handling, capacity relate this to the same example of gasoline in your car to octane rating (high test~regular medium-low octane). So a Re-cell will get your battery back to original specifications and in most case's better than original. (case in point older propac 14 battery's were built with a 4000 mAh spec cell, advances in battery construction have been made so that 5000 mAh is the current default standard)so the old 55/60 watt battery will be re-celled to 72 watts. With the Hytron 100,120,140 all get re-celled to the 140 watt capacity since the difference in cell cost at bulk pricing is very minimal and logistically stocking 3 cell capacity's in the same physical size does not make sense. The Dionic series all use standard OEM size Li-Ion cells in various parallel-series configurations to achieve a certain capacity. This area of battery construction is a rough competitive area and many import cell manufactures make some exorbitant claims to cell capacity so buyer beware! The one consistent standard is the 2200 mAH cell that is widely available from several reliable manufacturers. This same cell can be claimed as a higher mAh cell when used with specific chargers that will charge them to a higher voltage. All Li-ion battery pack systems will have a PCB (protection control board) that will control charging limits, discharge current flow, low voltage cut-off etc. These can be generic or OEM specific, the battery pack will contain at least one or more normally these do not require replacement but they do go bad from time to time. (note if a Li-Ion cell is discharged below 2.5V it is ruined or in the case of a battery pack 10 volts) Anton Bauer also use's temperature and over-current devices in their control design plus the fuel gauge output calculation circuitry and Memory Eprom that store cycle count, serial number, charge condition etc.. Also the case design is far superior to any other brand on the market (They can be re-celled indefinitely). Just about all of the Import Non Name brand Li-ion battery's are based on the Sony/IDX design and follow the same basic case and PCB electronic design with the exception of the actual cell manufacture and cell parameters (which is why you should use the same manufacturers designed charger) All of the V-Lock Sony/IDX style or other import manufacturer case's are a pain to open without some damage to the case or require a cut that has to be resealed making them slightly more expensive to rebuild/re-cell.( case plastic is much thinner, more fragile and very compacted with the circuit board and cells) Remember all Li-Ion type batteries are a limited life, charge/discharge cycle (about 2 years use it or not and 150 to 200 cycles) they also do not handle high current well and usually will damage one bank of cells rendering the pack unusable (all 14.4/14.8 volt packs are made up of 4 banks of 3.6-3.7 cells) Ni-Cd has the best current handling tendency and will recover better from low voltage drains, NiMh has the best cost to performance ratio both Ni-CD & Ni-Mh have far superior life and cycle (500 plus) and about a 3 year life with up to 70% capacity ( yes I know of plenty of Propac's and Hytrons that are over 5 years old and still work..... but they are no longer delivering anywhere near 70% of the original capacity) So when making a purchasing decision you have several factors that need to be considered for a battery pack purchase. 1st and foremost is calculate the total amount of power you require for a set amount of time include all accessories and the lens servo motor load in your calculation (Note camera manufacturers usually do not calculate lens servo motor load into the cameras wattage rating) Now shop for the battery based on manufacturers reputation and reliability and your budget sometimes you have to make do with what is affordable not necessarily the best. If anyone is interested in recell/rebuild you can contact me here or at 954-557-9765 (I am in Fort Lauderdale Florida) Mention that you are a Steadicam forum member for special pricing. Regards John Ritter

Thank You Tom! I can do the Proformer Battery recell... Special Steadicam Forum price is $54.99ea (you must be a forum member/ non member price is $74.99) Return shipping is included in the price (USA only. international at cost) Propac 14 recell price for steadicamforum members is $99.99 till the end of the year (2010) I have some used-recelled standard non digital propac batteries for outright purchase for $129.99 ea. All recelled batteries are warrantied for 90 days/12 months prorated. Regards John

If you want to ship them over to the states I can recell them for you. I can also sell you used-recelled Trimpac Batteries for $139.99 ea plus the actual shipping cost. Best rate is USPS international priority mail I can fit up to 5 in a flat rate box. Regards John Ritter 954-557-9765

All the batteries have been sold Thanks for looking.

I can recell those Dionic 90 and Trimpac batteries if anyone wants to make them like new again. Dionic 90 recell $159.99ea, Trimpac Recell $99.99ea Contact me 954-557-9765 or Email @ siebold35@hotmail.com

I have a Quantity of 4 freshly Recelled Anton Bauer Digital ProPac batteries. Just put in the new cells, so they are like new (case is used and will have normal dings and scratches). 14.4 V, 70 watts I warranty them for 90 days. Free USPS Priority Mail shipping within the contiguous USA. $165.00 Each or $600.00 for all 4 Contact me at 954-557-9765 or Email me

Batteries have been sold.

I have a quantity of 5 freshly recelled Hytron 50 batteries, I can provide up to 8 if needed. These have all been upgraded to 4200 mAh cells making them 60 watt capacity. *Note the digital display style will vary per battery (bar graph /pie chart) The external case is used and will have normal scratches and dings but I consider them in good shape. I warranty these rebuilt battery packs for 90 days. (if you are not satisfied return for a full refund less shipping cost) Sale price is $99.99 ea I can ship 1 or all 5 for $15.00 within the lower 48 states. all other areas and international at cost. You must be a verified steadicamforum.com member for this sale price. Contact John Ritter 954-557-9765 email:siebold35@hotmail.com

Hello all I can recell the Anton Bauer Propac Series NiCd Batteries. Both standard and digital models. I use imported cells (not Sanyo). I warranty all my batteries for 90 days. Forum Special pricing is $89.99 ea (you must mention that you are a steadicam forum member) You will need to send me the dead battery postage paid. The return shipping is included in the purchase price. My contact information is: John Ritter 2980 SW 81st Way Davie, Fl 33328 954-557-9765. I also take trade in batteries against any recell order. I also purchase dead battery packs (please do not expect a lot) Contact me to verify an order or a trade in deal. Note I can do any other battery style as a special order (sorry no NP style, the case is just too thin)

I forgot to add my contact information. John Ritter 2980 SW 81st Way Davie, FL 33328 Phone# 954-557-9765

These are Used Case's with brand new internal cells. Anton Bauer HYTRON 100 Series Battery 14.4 V recelled to 10,000 mAh (hytron 140) I have 2 for sale at $175.00 ea, USA UPS priority mail shipping is included. Run times of 5.5 hours at 20 watts, 2.5 hours @50 watts 90 day warranty if you are not satisfied return it for a full refund. **Note Battery weight may vary from original anton bauer weight. I have recelled Trimpac's & Propac's for sale also contact me for a quote I also accept dead anton bauer battery packs for trade in credit against any of my battery purchase's or recell service. I offer recell/refill service for all the Anton Bauer battery's including the Dionic series and a lot of other brands. Contact me at 954-557-9765, siebold35@hotmail.com Regards John Ritter

I can Recell just about all Pro Video Camera Battery's Currently stock the NiCd and NiMh cells the LiIon are available as a special order. All the Anton Bauer Series are available ProPac, Hytron, Dionic, TrimPac, Compac, ProFormer. Plus IDX, Sony, Frezzi, etc. No NP style as the case is too fragile for rebuilding or recelling. Contact me for a Quote.

I Have 4 Anton Bauer ComPac 14 Batteries Freshly ReCelled to 3500 mAh for 50 watt hours. All 4 for $400.00 or $110.00 ea Contact me at 954-557-9765 or direct Email: siebold35@hotmail.com Please be sure to mention that you are a Steadicam Forum member.

I am Located in Fort Lauderdale, Florida I can offer a steadicam forum special on the TrimPac battery recell for $82.00 ea. (return shipping is included, USPS Priority mail) I also do ProPac Series (forum pricing is 89.99) Please call me at 954-557-9765 or email direct: siebold35@hotmail.com Be sure to mention that you are a steadicam Forum member as the standard retail price is $94.99 / $99.99

Hi Randy Yes that is the correct price.

Recell / Rebuild service for the Anton Bauer ProFormer Battery Series Only..... NiCad Only I will replace all cells with new fresh cells giving your battery a new life and extended service. 90 day warranty on the replacement cells. (average charge cycles with new cells 500 to 1000, variable) Send me your dead battery postage paid and I can return it within 10 days with new cells ~ Fully charged and ready to go. Return postage is included in the recell cost. Battery housing must be in good condition, *Recell does not include repairs or replacement of heat sensors or other internal electronics. Only the New Battery's are included if other problems are found you will be notified. Flat Rate of $68.99 per battery Pac This is the lowest rate you will find anywhere. Discount is possible on 5 or more battery pac's, contact me for a quote. **Note I will also purchcase Dead Pac's if you don't want them. Recell for all Anton Bauer series battery's is available. ------------------------------ STEADICAM MEMBERS PRICE IS $58.00 ea --------------**********************------------------

If they are not available I have trimpac's, compac's, propac's, hytron 50's with fresh recells available for out right purchase or I can recell yours. Contact me for competative pricing. Regards john Ritter 954-557-9765

Hi Jess Sorry but the cost of the SANYO cells makes recelling a bad financial proposition, you would be better off buying a new battery. Sorry to hear you have had a bad experience with your other recells. But if a 90 day replacement warranty is not good enough I can’t do any better. The life expectancy for most batteries under constant usage is 2 to 3 years no matter who makes them; they are a chemical reaction based device. I have been using these cells for my own equipment for two years now so I can say that they do hold up as well if not better than the originals. You can also go to: http://www.batteryrebuild.com or http://www.rathboneenergy.com/ they also do recell’s. If you want to send me one I will recell it for you at no charge and return it to you so that you can try it out as a sample I only ask that you post a review here after 30 days good or bad so that everyone can see the results. Regards John Ritter

I use a generic import cell that is rated at 2400mAh, which is an a higher capacity cell than the original, I have had very good results with these cells. the proformer series is a very simple NiCd battery system. I assemble my own packs from individual cells. John Ritter 954-557-9765

I can recell the proformer series battery's for $55.00 ea and return shipping is included in the price. I can do a discount on 5 or more (less shipping cost due to flat rate USPS box) I also do the Anton bauer propac & Trimpac series battery's Nicad cells for $90.00 ea Contact me at 954-557-9765 Regards John Ritter