Rob Carlson

Cool. Cheers

Greeting Bud, I’m glad you’re well. I still have it.

5” Starlite PRO Bracket mod RainCover PRO Power Cbl Fisher Power Cbl BNCs Face protector Case Touch Screen works thru Stataglass weather cover $1200

StrataGlass CrystalClear Polishable, Sratch Resistant Bonded Polymer Marine Window Material. SemiRidgid Waterproof Teflon Coated 4 WayStretch Material Secured by Scoville Marine/Military Plasma Snaps. Removable SemiPlyable Shade/Topper Redirects partial Rain away from DirectHit RainDrops on Monitor Face and Takes out Backlight Pollution. FeatherWeight Good for Dolly Monitors also $85

Teflon Coated 4 WayStretch Waterproof Material. FeatherWeight Slip On/ Off from Dock. Good for Sand , Sea/Ocean Spray Environments. Works well in HighHeat Desert Conditions for Cooling effects of Material and general Blowing Fine Dust/ FX Dust/Debris $140

hi. For some reason photos are not properly uploading. I’ll send some fro another device. cheers

Not sure why blackness.

Hi Alfeo, you are looking for a VoltCover for an Ultra2/Volt? that’s no problem. You dock with Hill or similar not Volt Dock? Are you Reg or Goofy, it’s hard for me to tell on your photo ;) Thread Color. I have to make it tonight. Can ship tomorrow. Are you in ATL. I only have a Goofy V4 , which is M1 gimbal. Sorry. I’m trying to build stock but orders keep coming in. A photo of your gimbal would be helpful to verify cheers

Sold.

Hi if you want them it’s a simple snip. I used to snip them Best to do to taste yourself. A small, sharp tip scissors. The material won’t fray. There is one access point at post canister cheers

Arm protection from sand, sea/salt moisture and direct sun. The Teflon coated, waterproof 4 way stretch material has a slight reflective quality so it deflects sun rays and keeps the arm cooler making it more comfortable to operate in blistering sun/heat conditions. Doesn’t limit or impede on the Arms range of motion. It’s easy on easy off from Dock. Drys fast after rinsing/ washing. 2 sizes. PRO Titan. PRO Atlas/ G90 $140.00

$3750.00

$200.00.

This Monitor Protective Cover is made with a waterproof 4 way stretch Teflon coated material, the Snap system to secure the cover are made for Marine/Military applications. They are Plasma thus unaffected by moisture and decay. The front panel is a bonded vinyl and composite material called SrataGlass. It’s scratch resistant and can be cleaned/ polished. It comes with a semi flexible Top/side shade that helps channel water to the sides while providing backlight wash. They are made to order to accommodate for the various brackets. TransV 6&8”. SMHD 703 for the most part to date. If you’d like one, please email a photo of your setup to robbicover@gmail.com I usually use a grey type thread but I can use any color you prefer. Unfortunately black is really difficult for the sewing process so I don’t use black $135.00

This harness is the bomb when doing insert car or ATV/ Griptrix etc type work. Super secure and comfortable. Not light but goes on easy. Great Condition. Used mostly in cool weather conditions. new $400+ sell 300.00. Will ship within US lower 48 UPS Flat Rate

This Sling secures heavy Volt Arm Post into an area that’s padded to eliminate the bumping and banging from Cart travel. Also serves well for people “ferrying “ the rig to a distant set. It’s a lightweight., water resistant 4 way stretch material secured by a Marine/Military Plasma Snap system. Easy on easy off. Can live easy on the rig without interfering with Volt controls. Versatile fit. $35.00 US robbicover@gmail.com if you’re interested cheers

IMG_2108.MOV IMG_2108.MOV I Hi Thomas yes. I make a version for M1 gimbal and then one for M2, PROMod betz gimbals they are $125.00. If you are interested please email robbicover@gmail just for ease in communication. Goofy and regular are different covers and such. I have done mods to this cover over the fall.

The VoltCover5 is the same basically as the V4 (Tiffen Dock Green Thread images), but is meant for use with Hill or PRO Docks(Grey Thread). The Low mode protection is more secure due to more enveloping Teflon coated material around your Handgrip. Padded Cable Connect area for bump protection. Provides protection for the Small Encoder Cable as well. New Handle Pully/Belt water coverage extended material. Can be folded back. V4 Tiffen Dock $125.00 USD V5 Hill / PRO $125.00 Regular or Goofy Choose a Thread Color

This GZoom Cover has a Teflon Coated PolySandex material that marry well to the VoltCover4 Gimbal cover. It provides Debis and Light to Medium Rain Protection with a heatable Top of Hand situation keep the Hand out of open Wind and Rainy/Cold weather conditions. Marine/Military Spec Plasma Snaps $75.00

This Mitt is a Lightweight, Thin Glove density, Teflon Coated 98% Wind and 90% waterproof. The 10% I found in the seam areas after exaggerated water pressure condition. It has a slot to hold a full size Disposable Heat Pack available in many places. Additionally, There is a Thin Foam Insulation Inset that would prolong the life of the Disposable Heat Pack. You get 90% dexterity with your fingers. The Mitt design keeps fingers together for warmth and allows any style of finger placement on the Post/Gimbal. The Teflon Coated Polyurethane acts as a very Subtle Tacky Control Surface for a really true feel, but separating your skin from Cold Aluminum. Good for Damp Cold Rainy Conditions. Can compliment the GZoom Cover. $45.00 One Mitt email. robbicover@gmail.com

New price $4750us OBO

This is a Rain Cover Solution for PRO 2 Sled. It is Velcro free. A Marine/Military grade Plasma Snap is used for closure and size adjustments. Can fly big batts/ gyros. It’s a Waterproof Nylon/Lycra material Teflon coated with a Polyurethane coating that’s pretty indestructible. A Nylon Milliskin material and strapping envelope the rig. Battery changes for the 2ND AC while You’re standing with the rig on, are easy and quick. I’ll make it with any Thread Color you Choose expect Black. I build to order. $225.00USD All the Best Robbie. robbicover@gmail.com

New price $5000.00 us.