Nick Madeo

Tom D., thanks for the link. It's already ordered. This is a great solution since the cable is already attached and the only soldering to be done is on the Lemo. Again thanks to all for you assistance. Nick

Hi Tom, thanks, I do have one of these and use it connected to my anton bauers when I'm not on the flyer rig. It's this arrangement that allowed me to chop off the connector on the charger. Great suggestion though, if no other source exists for the Sony power plug. Thanks, Nick

Nick here, I'm a new steadicam op using the Flyer-LE with a Sony EX-3. This cam does not have the pro 4-pin XLR power connection which is standard on larger pro cams. Did some searching but was unable to find a power cable so I fabricated my own. I purchased a lemo connector from a third party vendor to create my own power link for the rig however the DC plug for the EX-3 connector is a rare find. I wound up cutting and splicing about a foot of cable from the EX-3's charger power cable to attach to the 3-pin Lemo. If anyone knows of a prebuilt assembly, or a source for the Sony power plug, please let me know where it can be purchased as I would like to have a back-up cable as well. Thanks, Nick Madeo