Jump to content

Alan Rencher

Premium Members
 View Profile  See their activity

  • Posts

    1,098

  • Joined

  • Last visited

  • Days Won

    43

 Content Type 

Everything posted by Alan Rencher

  1. Alan Rencher
    Is it a firmware issue, or a hardware issue?
  2. Alan Rencher
    You should use 75Ohm coax cable if at all possible. It would be easiest to use micro-coax cable (something in the 30-40 AWG range). The through holes where the DIN connectors are soldered are center-hole positive, 4 outer-holes ground. The hole pattern on the board might be able to fit MCX connectors. You could solder those connectors to the board, then make a cable the connect the full size BNC to the board.
  3. Alan Rencher
    Maybe you would be better off getting a Slingshot style rig or an Easyrig.
  4. Alan Rencher
    I really want PLC to make a two channel receiver as well.
  5. Alan Rencher
    I'm looking for pneumatic casters, flat-free pneumatic casters, or brackets for pneumatic casters for an American Grip Steadicam stand. Email me your price and what you have available: alanjrencher@gmail.com
  6. Alan Rencher
    Tx: http://shop.plcelectronicsolutions.com/products/Kit-BarTech-BFD-w%7B47%7DSlider%2C-2-BDR%27s-%26-2-M26VE%27s-.html
  7. Alan Rencher
    And now you can set your BFD up for two channels.
  8. Alan Rencher
    Matt, if you're here to promote a product, you must pay for s sustaining membership. I say this because you are new to the forum, and your only two posts are links to this product. It's forum rules.
  9. Alan Rencher
    I was using an F55 today. It's insanely light. Lighter than an epic. Get the cheese plate for the top, or you'll have trouble mounting things. I would also avoid using the HDMI output, a lot of devices have trouble with it. Was using the SDI with PSF output today with my Decimator/Arrow combo, and it worked perfectly. You also can't do a lot of menu commends unless the EVF is attached (like formatting cards), so the AC should keep it nearby. The 4-pin XLR comes straight out the back and there are no P-Tap ports on the back, only Hirose. You might want to fly with the battery on just to add weight. Cheers
  10. Alan Rencher
    It reads like a book, input left to output right when the LED display is upright.
  11. Alan Rencher
    Special for this month: free domestic shipping in the US. Use the coupon code: noshipsept
  12. Alan Rencher
    Will you be selling these through a site like Shapeways?
  13. Alan Rencher
    I can do that. Drop me an email at alan@mediablackout.net, and I'll get an estimate going. Thanks! Alan
  14. Alan Rencher
    I've made a number of these, so I've decided to carry a stock of them: Regulated P-Tap to DC Barrel - http://mediablackout.net/product/regulated-p-tap-to-dc-barrel/
  15. Alan Rencher
    Thanks Will. Always glad to help!
  16. Alan Rencher
    Here are some cell phone pictures I've taken using the plate in different scenarios:
  17. Alan Rencher
    If anyone has photos of how they are using the Intersex Plate, please post them! Thanks!
  18. Alan Rencher
    I think of you can develop this, it will be great for the consumer market. There isn't much demand for it in the professional market, though.
  19. Alan Rencher
    I moved my site. Everything is at http://MediaBlackout.net. I can't go back and change my original post.
  20. Alan Rencher
    I have new thin BNC available that is extremely flexible: MegaFlex http://mediablackout.net/product/megaflex-hd-sdi-cable/
  21. Alan Rencher
    V1 or V2?
  22. Alan Rencher
    I modify the included AC adapter by cutting the dummy battery cable in half then splicing in a male and female connector inline. It's AC power when you need it, and DC power otherwise.
  23. Alan Rencher
    I'm going to start offering this cable on my site. I've been making them for years, so it's probably time. If you need one now, you can email me. $65 for a 0B.303 to P-Tap female. Alan@mediablackout.net
  24. Alan Rencher
    Also, if you have a Version 1 Plate, you can order my custom T-Studs here: http://mediablackout.net/product/t-studs/
  25. Alan Rencher
    The Intersex Plate V2 is now in stock! Available on the website now, and they will start shipping tomorrow! http://mediablackout.net/product/intersex-plate/
×
×
  • Create New...