RonBaldwin
Premium Members-
Posts
2,360 -
Joined
-
Last visited
-
Days Won
129
Everything posted by RonBaldwin
-
I will echo what Kat said GB suggested. I have been flying the rig a while and for all those years one of the main quests has been to keep the rig short, and the gimbal as high on the post as possible. This desire is why some rigs/features are chosen over others and even one of the main concepts that some sleds are designed around. The usual trade-offs and compromises abound as they do with everything.
- 33 replies
-
- volt steadicam
- volt
-
(and 2 more)
Tagged with:
-
“Blue Plate” Camera Riser Plates
RonBaldwin replied to Tom Wills's topic in Steadicam Marketplace - For Sale
I have two of these and they are awesome. -
You’ll need a new screw and some t-nuts. t-nuts are really easy to put on, unfortunately most of the time you have to buy them in larger numbers than you’ll ever need. You could start by contacting Hugo at Steadyrig. If in LA I bet I have a few t-nuts lying around, you’d just need to stop by a hardware store and get a new 1/4-20 screw (i don’t own that arm so not sure of the size) and i can put it on for ya (assuming i can find them). Hit up a better hardware store and often they have the bolts you need with different kinds of knobs already on them
-
Also remember this was shot in 1990 and I don’t think anyone was doing those types of whips back then (if so, not to this extent and precision). It was also on a 3a with a 3” screen and external cable. Still very impressive today. unfortunately back then we all sounded like we were breathing helium
-
Technovision Mark III S Geared Head
RonBaldwin replied to Ross Coscia's topic in Steadicam Marketplace - For Sale
Hi Ross very interested. Where are you located in LA? Love to come see in person. My# 818-427-3041 Thanks, Ron -
I have had one for a year or so...works great like A-A-Ron said. I use the gyro as well...on the slow speed because I am old
-
I think there was a thread in the fb steadicam forum about this, and Mike Alba (one of the two ops) chimed in for a bit. I appreciate the effort though would like to see if the long shots bore me to tears. That's the trick, holding the audience's attention and telling the story, not showing how long one can go without cutting.
-
10/32
-
A lot of people have been messaging me about the wrap grip I use. It is an old school item from the days before tooless gimbals. Lucky I still have a few as I am too old to figure out how to operate above the gimbal in lowmode. Here are some pics so someone can go have a few made Please note that even with all these cool accessories my lowmode still sucks
-
Landau Steadicam Cart
RonBaldwin replied to Matt Lingerfelt's topic in Steadicam Marketplace - For Sale
With Robert's name on the cases it might be worth more! -
Hey! I use a Q-Branch tilt plate. It is actually pretty good...well, I think it is good because it's the only add-on tilt plate I have tried! It is very light-weight and about the same dimensions as an XCS plate. I have the prototype which had some clearance and locking issues. I believe these issues have since been taken care of. I can go about 20 degrees without having re-rig or lose the mdr. I believe it will go to 45 deg. Really nice to have.
-
They are the same wheels, I love them, very well made. I tought of moving the axle up to see if it would work with an 8" tire but was kinda wanting to try putting these on the back of my rickshaw cart (or selling them before modifying them). I have 8" on the cart now and 10" is much better about getting over obstacles. I have mixed feelings about wheels on a stand -- beats the shit out of your gear, probably more so now that everyone has gore-locks
-
If you want 10", American grip sells some badass ones with tire brake as well as rotation lock. They are the same ones on their crankovators. Expensive but really nice. I have three I never use just because I travel so much, and the rig usually sits on the cart To be honest I wish they were exactly the same but 8"
-
Stabilizer Gear Expo 2016
RonBaldwin replied to David Allen Grove's topic in News, Events, Workshops
-
I licked mine and now it fits great
- 26 replies
-
- 2
-
I take an extra minute to move the monitor to a better viewing position and add a wrap grip under the gimbal. No complaints on the extra time and I am still looking down at my monitor instead of up and missing my peripheral vision
-
Does the PRO CineALive have vibration problems?
RonBaldwin replied to Andrew Fletcher's topic in Sled
Moving fast with long lenses, long camera setups and/or low mode will open up a can of worms...especially if one uses a dbox2. The 3 is so much better but still not immune to a bit of vibration. The camjam is petty solid. The best rig for sucking up the vibrations in an XCS Ultimate. I know many who use the XCS post on their pro's and have fewer issues that I might have with same top and bottom stage and stock post -
He probably has diodes installed to prevent reverse voltage...I think David Hable does a similar mod (if he didn't do this one)
-
Automated Horizon on a steadicam
RonBaldwin replied to Michael Hauer's topic in Camera Stage/Donkey Box
Now that the Wave is out...I imagine we'll never see it -
Does the PRO CineALive have vibration problems?
RonBaldwin replied to Andrew Fletcher's topic in Sled
Short answer -- yes, aluminum "transmits" vibration far more than carbon fiber. I have had a pro since '97 and have had occasional issues (as all owners of all sleds have). i am not familiar with the Betz top stage but I hear it is very nice. Take a long hard look at other accessories and check how solid they are. What monitor bracket are you using? How does the monitor attach to the bracket? What camera...mounting plates etc... Is there play in the batteries? I went through a lot of monitor brackets over the years...put the rig on the stud (can I say that here?) and lightly hit it with your fist in different spots and look what happens. -
It's easier with some bourbon, and steadi cams react well to punk rock
-
PRO 1 Sled with Anton Bauer battery base
RonBaldwin replied to Carl Wiedemann's topic in Steadicam Marketplace - For Sale
The top stage that started it all -
Ritter recelled hc batteries on new AB chargers?
RonBaldwin replied to RonBaldwin's topic in Batteries/Power
Nice find -
Preston Motors DM2 and DM1X For Sale
RonBaldwin replied to Denny Kortze's topic in Steadicam Marketplace - For Sale
I will take the dm1x if still available Ron B