Hani Arab
-
Posts
3 -
Joined
-
Last visited
-
Days Won
1
Posts posted by Hani Arab
-
-
The CW-7 V-Mount Uncompressed Wireless HD/SD-SDI Transmission System is a transmitter and receiver set that allows you to send an HD/SD-SDI signal up to 328 ft with zero frame delay (less than 1 ms). It supports resolutions up to 1080i60/50 uncompressed in YCbCr 4:2:2 10-bit with two channels of embedded audio. Featuring four discreet channels, the system supports unicast operation, wherein multiple transmitters and receivers can utilize the available channels, and multicast operation where one transmitter can send to up to four receivers at the same time.
The transmitter features one HD/SD-SDI input and one loop-output, and the receiver unit offers dual simultaneous HD/SD-SDI outputs. Both units feature a V-mount plates on both sides and a 4-pin XLR male power input. The transmitter is intended to be sandwiched in between a V-mount battery and V-mount plate on your camera. You can also use the XLR input to power the transmitter but it won't be able to pass power to the camera. Both units also have a 3/8"-16 thread for additional mounting options.
Both units have internal 24dBm antennas and operate on the license free 5 GHz frequency spectrum using a MIMO transmit method.
Includes a custom fitted pelican case.
Located in Sydney. Happy to ship worldwide.
$900 AUD.
-
One Steadicam Stand for sale
Everything works well and as designed.
Item is located in Sydney.
$350 AUD
-
$300 USD. Still available.
-
I'm selling my Canatrans & Tandem pair.
For range and reliability in Wireless Video, the Canatrans is the absolute Gold Standard as you will know.
This is the rare Gobal Edition, that does both PAL and NTSC
it's practically new, as you will see in the pictures.
It comes with an extensive accessory list of item. refer photos
Including several power cable options.Please find more info here:
http://lentequip.com/products/canatrans-video-transmitter
http://lentequip.com/collections/wireless-video/products/tandemtm-uhf-receiver
Items included:
Tandem Receiver Global Edition
Lentequip CanaTrans Video TX
Additional 1/4 wave swivel antenna Red
Additional 1/4 wave swivel antenna Yellow
Lentequip Battery mount for Sony batteries
Sony dual bay fast charger
Sony info Lithium batteries
CanaTrans 2 pin fischer RCA audio
Comes in a custom aluminum flight case.Current Prices:
Global Canatrans $2,195.00
Tandem $2,995.00
Power Cables:
Anton Bauer P-Tap $160.00 USD
4 pin XLR 12V $160.00 USD
Arri 3 pin Fischer R/S 24V $160.00 USD
Sony battery charger and 2 x batteries + Lentequip adapter
Thats a total value of over USD 6000.
Asking USD $3500 for the whole set.
-
A complete modulus production kit in as NEW condition.
$400 USD
The Modulus 3000 is still one of the most powerful and effective miniature UHF standard def (NTSC / PAL) video transmitters on the market.
The Modulus 3000 is small enough to hang, strap or velcro practically anywhere on or around the camera.
Synthesized tuning allows each unit to switch externally with the turn of a dial to any UHF channel from 14 to 69.
Multiple units can work together anywhere in the world without interference.
The Modulus 3000 features Composite 1V / 75 ohm,
Channel Frequencies: UHF USA CH 2-69,
Dimensions: 3.2"x2.2"x1.5" Weight: less than 8 oz.
Power Input: 10-28 Vdc@ 1.2A (450mA nomimal),
Power Consumption Transmitter: up to 400 mA,
Power Connectors: Hirose 6pin,
Transmits: through residential walls, floors, ceilings or crowds without picture interuption. Range: 300m (1000ft) line of sight.
-
-
Hi Greg,
Yes package is still available.
-
Price Drop to $22K USD
-
Steadicam Clipper 324 Kit in excellent condition.
I purchased this kit new from Lemac after a SMPTE show.
Selling due to very little use, 3-4 times in year. Check out photo to confirm.
Sell $25K USD
Full genuine rain covers
Extra cheese dovetail plate
Extra screws
Extra thin BNC cables
F-bracket
Manual
UltraBright Monitor w/Level indicator & overlay
Custom cables
Quad Charger & Power Cube Batteries
American Steadicam Stand
Refer to photos for further details.
https://www.dropbox.com/sh/so25iumlcwu8mo9/AADlq5eim0LhSMVl68qtWfUpa?dl=0
-
2
-
-
Steadicam Clipper 324 Kit in excellent condition.
I purchased this kit new from Lemac after a SMPTE show.
Selling due to very little use, 3-4 times in year. Check out photo to confirm.
Sell $33K AUD, which is a bargain for my USA mates.
Full genuine rain covers
Extra cheese dovetail plate
Extra screws
Extra thin BNC cables
F-bracket
Manual
UltraBright Monitor w/Level indicator & overlay
Custom cables
Quad Charger & Power Cube Batteries
American Steadicam Stand
Refer to photos for further details.
https://www.dropbox.com/sh/so25iumlcwu8mo9/AADlq5eim0LhSMVl68qtWfUpa?dl=0
-
Additional photos of Arm and custom foamed pelican cases.
-
This kit originally started as a complete Glidecam V-25 kit designed for film and video cameras weighing from 10 to 25 pounds.
The complete system is comprised of a Support Arm, Vest and Sled.
Then the upgrades added included:
-Titanium block
-MKV Adjustable Monitor Mount for Sled
-Transvideo Cinemonitor IIIa SuperBright is 1200Nits
-Low-Mode Kit
-Gold Vest
-X45 Arm
-Many cables to power 4-Pin XLR, DC Barrel Power, Bartech FF, etc.
All items come in custom foamed Pelican 1650 cases (2 Cases)
-1 Holds slide and arm, Dock
-1 Holds Vest, low mode and monitor & accessories
No Batteries Included (Currently setup for V-Locks)
$7500 USD
Details regarding arm:
The Glidecam X-45™ sled holds any video or 12 volt film camera weighing up to 45 pounds.The X-45 Sled incorporates sophisticated engineering and precision machining to make it lightweight and strong.Three dedicated video BNC connections are located on the base and head assembly.The Glidecam X-45 central post power/ video cable can handle composite video, component video and HD-SDI video. Two 2-pin Lemo connectors are also located on the base and head assembly. The two on the base are for accessories. The head has one for camera power and the other for camera accessories.The precision, x-y adjustable Head assembly incorporates a drop in style dovetail camera plate for quick front to back balance. Very, fine tuning, ergonomic knobs control front to back and side to side balance adjustments.The Sled’s “no-tools” precision Gimbal is made to top of the line quality.The Gimbal incorporates 4 bearings inside the handle to yoke connection (the tilt axis). There are 2 bearings on each side of the yoke, providing 4 bearings for the roll axis.A very tight knurling has been machined onto the Gimbal Tube to improve handling. An easy to replace soft foam covers the handle grip.The Glidecam X-45 Sled has a strong and rigid 1.75” central post, and a “no-tools” Telescoping Post. This allows you to easily adjust the sled length and position of the LCD and batteries.The Glidecam X-45 base platform can be set up with two-three Anton Bauer or V-Mount style batteries.
American Grip Steadicam Stand - (Australia)
in Steadicam Marketplace - For Sale
Posted
SOLD