Search the Community

Greetings All! I created a versatile kit that allows you to fly a big rig at a low entry price point and quickly swap to gimble, hand-held or sticks with the SOS plate and Slingshot. I took a modular approach when creating the kit, so when you’re ready you can swap-in other sleds while keeping the arm, vest and support tools. I bought this Steadicam in 2020 from the talented Lohengrin Zaplain (RIP). I’m the second owner and primarily used this for flying on my own indie productions. The rig was made for heavier cameras, but the package includes a 15lb (6.8kg) weight plate that allows you to comfortably fly newer digital and lighter cameras up to a very comfortable operating weight. The 3A arm can be modified by Robert Luna to open up the bottom of its range. This kit is great for anyone looking to upgrade into a commercially useable rig without the budget for a brand new one. While a little older, it still comes with quite a few nice features. Note that the Transmission, FF and batteries all work. Happy to work with you on pricing and payments. $12,999.00 All-in (Plus Shipping) INCLUDED: 1x Tiffen ULTRA HD Sled Super post, motorised head and HD-SDI line added - Custom Cut Armoured case on wheels - Tiffen 15cm 6" (short) plate - Tiffen 30cm 12" plate - Weight Plate 15lb/7kg Modifications: - removal of the tilting stage - removal of the top post (weak post) - HDMI conections added - 12/24 V electronics bypassed and wired for 12V (electronics are still there) - New double V-mount mount 1x 6“ Transvideo Monitor and Yoke 1x 3A Arm - Good condition. Can fly anything you throw at it! 1x Walt Klassen Rear-Mount Vest - W 32-36 x H 5’8” – 6’2” - New Waist Pads - Slingshot v1 (Gimbal/Handheld mounts) ------------------------------------------------------------------------------------------------------------------------------------------------------- Additions: 1x SOS plate 1x FOLLOW FOCUS - Bartech Follow-Focus with DM1 motor, mount and cabling 1x TRANSMISSION - Bolt Pro TX/RX (with two backup RX) with cabling 1x Tiffen ULTRA Docking Bracket 2x IndiPro V-Mount Batteries 2x Ultra to 12v XLR Power Cable 1x Ultra to 24v XLR Power Cable 1x Ultra to Panavision 24v Power Cable 1x 4 pin XLR to Fischer 2 pin (arri Alexa) 1x 4 pin XLR to 2pin Lemo (teradek) 2x Tiffen/Hill 5/8 to ¾ arm posts -------------------------------------------------------------------------------------------------------------------------------------------------------. TRANSPORT: 1x Tiffen Flight case for Sled 1x Klassen Soft bag for Vest 1x Tiffen Soft bag for Arm 1x Klassen Soft bag for Slingshot V1 and front mount vest 1x 6“ Transvideo Monitor and Yoke 1x 3A Arm - Good condition. Can fly anything you throw at it! 1x Walt Klassen Rear-Mount Vest - W 32-36 x H 5’8” – 6’2” - New Waist Pads - Slingshot v1 (Gimbal/Handheld mounts) 1x Tiffen ULTRA Docking Bracket EXTRAS 1x TRANSMISSION - Bolt Pro TX/RX (with two backup RX) with cabling - O.G. but still transmitting image! 1x FOLLOW FOCUS - Bartech Follow-Focus with DM1 motor, mount and cabling - Bomb Proof! 2x IndiPro V-Mount Batteries Plates & Posts Tiffen 15cm 6" (short) plate Tiffen 30cm 12" plate Weight Plate 15lb/7kg 2x Tiffen/Hill 5/8 to ¾ arm posts Ultra Cabling 2x Ultra to 12v XLR Power Cable 1x Ultra to 24v XLR Power Cable 1x Ultra to Panavision 24v Power Cable 1x 4 pin XLR to Fischer 2 pin (arri Alexa) 1x 4 pin XLR to 2pin Lemo (teradek) 1x SOS plate TRANSPORT: 1x Tiffen Flight case for Sled 1x Klassen Soft bag for Vest 1x Tiffen Soft bag for Arm 1x Klassen Soft bag for Slingshot V1 and front mount vest *Front Mount Master Series Vest (?) Project Vest

Hello Friends, I’m selling my Cinema Products IIIA (3A) Steadicam Arm with Gold Titanium Springs. SN: 584 Manufactured in 1994 by Robert Luna. Last serviced by Robert Luna on August 21st, 2019. The arm was moderately used for a year after its last service and has since been sitting in its case. The arm is in fine working conditions with cosmetic wear and tear (see photos). Included is a metal Steadicam Case (it has a good amount of wear and needs new foam, but it’s still a functioning case), 1/4” Speed Wrench, 6” Arm Post, Arm Post Bearing. Looking to get $3,800.00 OBO plus shipping or pick up (LA). If you’re interested, have any questions, or would like to see the arm in person, please feel free to email me at: aaron.gantt@gmail.com IMG_5561.HEICIMG_5565.HEICIMG_5562.HEICIMG_5566.HEICIMG_5567.HEICIMG_5568.HEICIMG_5569.HEICIMG_5571.HEICIMG_5572.HEICIMG_5573.HEICIMG_5574.HEIC

Hi guys I'm selling my old Cinema Products 3A rig ( mod. 3 modified with extendible post ). The package includes : 3A arm with red springs ( in very good conditions) 3A vest 5 ni-cd batteries ( 1dead ) battery charger 2 heden m26p (analog) with cables seitz 8710a follow focus ( old but still working fine ) low mode docking bracket camera plates cables and accessories and all you can see in the pics Located in Rome , Italy Asking 7000 euro or OBO