Search the Community
Showing results for tags 'Bartech'.
-
After purchased of Chrosziel Magnum, I've decided to sell complete set BFD Focus System BarTech Engineering. Almost every item is in perfect condition. All reasonable offers considered! Set contains: - 1 BFD set Tx Bartech Focus Device with upgrade to fix with ¼ screw Rx Bartech Focus Device Bracket for mount BFD - 3 Power cables: Canon 4 pin to BFD D-Tap to BFD Paddock to BFD - 4 Special cable: cable with potentiometer for manual control with Rx (not use tx) cable switch to move gear from one to second position (red, white and black cable) cable to connect Tx and Rx without RF cable run camera for Red One - 1 M-One motor with: 3 Rod Collets ( 5/8”, 15 mm, 1/2", 19mm w/o a collet) 2.5” universal extension/offset bracket with 19mm attachment tubes (1.12” & 2.12” long) 6 lens gear Module/Pitch 0.8m-32P, 0.6m, 48P, 0.5m, 0.4m-64P, extra wide 0.8m-32P and 1 without teth 2 Motor cable 58 cm (22”) and 50 cm (20”) long Special gear-lever to push any botton Price 3000 euro OBO Stefano Martini, Italy info@stefanomartini.it
-
Hello everyone, I’m selling my Bar Tech Digital Follow Focus kit. the kit includes 1 x BarTech BFD Handset (missing one small black knob) 1 x fSTOP Wireless V2-1 BarTech Receiver 1 x Digital Motor Cable 1 x fSTOP P-Tap Power Cable 2 x 900MHz 1/4 Wave Antenna 2 x 916MHz 1/4 Wave 3 1/8" long Antenna 9 x Plastic focus rings 3 x metal focus rings 1 x Heden M26VE Motor x1 19mm to 15mm adapter Selling for $3000.00 or Best Offer buyer pays shipping. please note that certain countries may not accept packages at this time do to COVID-19 thank you!
-
Selling my Bartech Digital Follow Focus (without motor). Works great - very responsive and accurate! The set includes: 1 x BarTech BFD Handset with antenna 1 x fSTOP Wireless V2-1 BarTech Digital Receiver with antenna 1 x fSTOP P-Tap Power Cable $375 USD plus shipping from Toronto, Canada.
-
- bartech
- follow focus
-
(and 1 more)
Tagged with:
-
Hello everyone I just bought an analog Bartech on ebay, it was not expensive and of course it was not working well it was "chopy" when I tried to pull focus. I am in Paris France and could not send the Bartech to US. Hopefully I found Carmine Zecca in Italy that took the Bartech and did all the repairs and now it is working perfectly. I love this old style follow focus that is so easy to set up. I use it with my Zeiss ZF lens. 15, 21, 28, 35, 50 macro, 85, and 100 mm. For the 2 last lens I have to use a lens support(DIY) for the lens to be perfectly stable. If you are in Europe Carmine Zecca is a great technician for repairs. His mail is carmine.zecca(at)panalight.it
-
Selling my digital BarTech. Kit is in pristine condition. Located in Newark, DE. Asking $3000. Kit comes with:- BarTech Handset- fSTOP Wireless V2-1 BarTech Digital Receiver- Heden M21VE-L Digital Servo Motor with 0,8 gear- Set of Heden gears for M21VE-L: 0,4 0,5 0,6- Digital Motor Cable- P-Tap Power Cable- 4-Pin XLR Power Cable- BarTech C300 On/Off Cable (Works with C100, C300, C500)- Pelican Hard case- 3 Plastic Focus Strips- 9V Battery holder
-
For Sale: Bartech Wireless Single Channel Wireless Follow Focus System with Heden M26VE Motor. - £3,000.00 OBO Kit Includes: 1x Bartech Transmitter 1x Digital Receiver 1x Heden M26VE Motor with 19 & 15mm mount 2x Motor Cables 2x Power D-Tap Cables 6x Plastic Strips for Transmitter 4x Gears for Heden Motor 1x Peli Case 1x Lanyard 5x PP3 Batteries Buyer pays courier at cost. No UK VAT on this sale.
-
Analog Bartech Focus Device for sale. In perfect working condition and lots of cables. I am local to Los Angeles. Asking $2500 and buyer pays shipping. Thanks for looking. Jon
-
Excellent condition Bartech single channel digital wireless follow focus kit with Heden M21VE-L Motor. Heden M21VE-L Motor has just returned from Heden in Sweden having been fully serviced including a new internal motor, internal pin, gear hub and ball bearings in December 2018. Attached is a screenshot of the invoice to show the work that was done. Kit comes with: 1 x BarTech BFD Handset 1 x fSTOP Wireless V2-1 BarTech Receiver 1 x HEDÉN M21VE-L Motor with snap on pitch gears sized 0.4, 0.5, 0.6 and 0.81 x Digital Motor Cable 1 x fSTOP P-Tap Power Cable 2 x Antenna Operation manuals for handset and receiver Asking $3000 USD buyer to pay for shipping kit is currently in Auckland, New Zealand nick323@gmail.com
- 2 replies
-
- bartech
- follow focus
-
(and 1 more)
Tagged with:
-
Up for sale is my mint condition Bartech single channel digital wireless follow focus kit with Heden M21VE-L Motor. This kit has been used on one small film project and once or twice for practice and testing. Kit comes with: - BarTech Handset - fSTOP Wireless V2-1 BarTech Digital Receiver - Heden M21VE-L Digital Servo Motor with 0,8 gear - Set of Heden gears for M21VE-L: 0,4 0,5 0,6 - Digital Motor Cable - P-Tap Power Cable - 4-Pin XLR Power Cable - BarTech C300 On/Off Cable (Works with C100, C300, C500) - Bartech hard case - Pelican Hard case - 3 Plastic Focus Strips - 9V Battery holder - Fine tip dry erase pens with small eraser on each pen Asking $3500
-
Analog Bartech Focus With M-One Motor $1,800.00 Shipping in the Lower 48 States in the USA is included with purchase Buyers elsewhere pay for shipping Meticulously maintained. This was my backup and very seldom used. - BFD Transmitter - BFD Receiver/amplifier - M-One Analog Focus motor - Matte box rod receiver/amp mounting bracket - Steadicam Motor Rod Set - 6 Lens gears - Various rod adapters - 19mm universal mounting bracket - 2.5" universal extension/offset bracket with 19mm attachment tubes (1.12" and 2.12" length) - 3 spare antennas for Transmitter - 2 spare antennas for Receiver - Hard cases for both the BFD system and M-One motor - Cable 5795: BFD Receiver to Video Camera 12-Pin Run/Stop cable - Cable 612:BFD Receiver to M-One/Heden 5-pinb Motor cable - Cable 6066: BFD Receiver to Arri 435/535/Arricam/Moviecam Run/Stop cable - 5-Pin Lemo to 5-Pin Lemo - 2-Pin Lemo to 2-Pin Lemo –(I power from the sled with this one. One end is 2 pins in a 3 pin casing)
-
Hello, I sell my 2 Analog Follow focus sets : - 2x Bartech remote controls - 2x Bartech receivers - 2x Heden motors M28VP - 5x cables (receiver to motor) - 6 gears (0.4, 0.5, 0.6) - 1 mounting bracket Good working condition Sell price : 1300€ each, or 2200€ for all package Price drop : 1000€ each or 1800€ for all package Available in Paris, France (9th district) Jean tel : +33 (0)6 22 61 68 17 mail : jean@steady.fr
-
Up for sale is my mint condition Bartech single channel digital wireless follow focus kit with Heden M21VE-L Motor. I have only used this kit a few times. I recently accepted a full time position and I don't foresee having the time to do enough freelance work to justify keeping this kit. Kit comes with: - BarTech Handset - fSTOP Wireless V2-1 BarTech Digital Receiver - Heden M21VE-L Digital Servo Motor with 0,8 gear - Set of Heden gears for M21VE-L: 0,4 0,5 0,6 - Digital Motor Cable - P-Tap Power Cable - 4-Pin XLR Power Cable - BarTech C300 On/Off Cable (Works with C100, C300, C500) - Bartech hard case - Pelican Hard case - 3 Plastic Focus Strips - 9V Battery holder - Fine tip dry erase pens with small eraser on each pen New this kit is almost $6,000 USD Asking $5,000 USD
- 3 replies
-
- wireless follow focus
- BarTech
-
(and 2 more)
Tagged with:
-
Wonder whether Jim or anybody can help me. We have an analog BFD with the M-One motor my question is is there a mod to convert the handset to use digital motors? Is it just a case of the PLC receiver? I have a CMotion CForce motor & would like to use this with the Bartech. Thanks in advance. Lammo
-
Hey everyone! I'm selling my Bartech BFD because I've had a slight career shift and my new work doesn't need the beefier setup of the BFD and M-One Motor. Everything is in used condition, but works great. I have lots of detailed photos and I'm happy to take specific photo requests if you have something you want to see in detail before buying. I'm including everything pictured (except the table or cyc wall). There's a lot in this kit, but I'll break it down as best as I can. Frankly, there's a few cables that came with the BFD when I bought it that I'd be unable to identify properly, but I've included the detailed pictures of all cables and connectors. Here's what's in the kit: Foam-Fitted Handheld Case An ORIGINAL printout, analog paper Manual with OEM staple. Bartech BFD Wireless Transmitter - Handheld Focus Puller (S/N T1.0154) Spare Markers for BFD BFD Hardwire Cable. 25' Cable connecting the Transmitter to the Receiver in case of signal loss or faulty connection. Works great on jibs or cranes. (Reference: Image B) Bartech BFD Wireless Receiver (S/N R1.0154) Horizontal and Vertical Mounts (15mm and 19mm) New Antenna (Not pictured; I lost the original plastic antenna cover, but ordered an entirely new OEM replacement antenna.) BFD Receiver Gimbal Mount - Hard-wire Remote Control for use on a Steadicam, Movi or Ronin. (Reference: Image A) M-One Motor (S/N M-1.0010) Six gears with varying pitches for different size lenses: 0.8m - 32P (2x), 0.5m, 48P, 0.4m - 64P, and 0.6m 15mm, 17mm and 19mm rod adapters for proper mounting fit Misc Hardware for Receiver Mount and replacement screws Additional Cable Assortment 3-Pin male to 3-Pin male LEMO long hardwire power extension cable (Looks to be about 10-15 feet long. I can confirm if you'd prefer, just let me know!) (Reference: Image H) 5-Pin male to 5-Pin male LEMO connector cable from receiver to motor (Reference: Image D) 3-Pin male to 2-Pin male LEMO to power receiver from Steadicam Zephyr (and others with similar 3-Pin connector) (Reference: Image I) Anton Bauer D-Tap male to 2-pin LEMO male to power the receiver from an Anton Bauer battery or V-Mount adapter with proper D-Tap connector. (Reference: Image G) 12V 4-Pin XLR male to 2-pin LEMO male presumably powering the receiver off of beefier film cameras or battery connectors (Reference: Image E) Unidentified 2-pin male LEMO to a fun, half 2-pin male, half 2-pin female connector that I've never seen before or needed to work with. If you recognize it, you get bonus points. (Reference: Image F) I think this last one is an old Panavision connector, if memory serves. But, I'm really not certain on this one either. It's a half 1-pin male, half 1-pin female LEMO connector and a fat 11-pin male connector on the other end. (Reference: Image C) Price: $3750 USD FREE SHIPPING to USA. Will provide quote for international Shipping. Payment via Paypal for Shipping or cash for Local Pickup: Boston area) Pictures attached:
-
Hello, I sell my 2 Analog Follow focus sets : - 2x Bartech remote controls - 2x Bartech receivers - 2x Heden motors M28VP - 5x cables (receiver to motor) - 6 gears (0.4, 0.5, 0.6) - 1 mounting bracket Good working condition Sell price : 1300€ each, or 2200€ for all package Available in Paris, France (9th district) Jean tel : +33 (0)6 22 61 68 17 mail : jean@steady.fr
-
- Bartech
- Follow focus
-
(and 1 more)
Tagged with:
-
Selling a 2 Channel Digital Bartech System with 2 motors and extra cables. New: $11,000 CAD Asking: $5,500 CAD Package List: 1 x Bartech BFD Handset (with 2 channel upgrade) 1 x Bartech v2-1 Digital Receiver 1 x Bartech v1.0 Digital Receiver 2 x Heden M26VE Motors w/ .8 Pitch Gears (both recently serviced at Heden) (These are $3150.00 CAD new at the moment, so the motors alone are a steal) 2 x 19-15mm Collet (only one shown in photos) 3 x Standard Antennas 2 x Long Range Antennas 2 x Motor Cable (only one shown in photos) 1 x Red Start Stop 1 x Arri Start Stop 3 x P-tap Power Cable 10 x Focus Strip 1 x Pelican 1500 Case Buyer pays shipping (DHL, UPS or FEDEX) Email me with any questions: dmtwood@gmail.com
- 1 reply
-
- bartech
- remote focus
-
(and 6 more)
Tagged with:
-
Hi everyone, I'm selling my lightly used Bartech system. As you can see, the system is very well maintained and fully functional. Here's what's included in the package: - BFD Transmitter - BFD Receiver/amplifier - M-One Analog Focus motor (Very accurate, responsive, and reliable even in extreme conditions) - Matte box rod receiver/amp mounting bracket (the 4 small screws are missing but you can easily get new ones) - 5x Aluminium focus rings - Lens gears: 0.8m-32P, 0.6m, 48P, 0.5m, 0.4/64pitch, extra wide 0.8/32pitch - Various Rod collets - 19mm universal mounting bracket; will mount on either side of the motor in either direction - 2.5" universal extension/offset bracket with 19mm attachment tubes (1.12" and 2.12" length) - Hard case for the BFD system and another hard case for the motor and its accessories Cables: - M-One motor cable (LEMO 5-pin) - Receiver to Hirose 4-pin 12V power cable - D-Tap to Hirose 4-pin power cable - Receiver to ARRI RS power cable with 24/16V converter - Receiver to Panavision power cable with 24/16V converter - Receiver to Gimbal mount remote control module Everything in the photos is included. Asking for 2750$ + shipping. Item is located in Beirut, Lebanon Let me know if you need additional information or photos. If interested, please email: contact@christopherkechichian.com Thanks, Christopher
-
steadicam provid 2 plus with many upgrades and custom electronic. 12/24v $7.000 Hello every one, I am selling my first rig that I had, which I have conserved and updated constantly to respond to the demands of the current market. was my backup rig the last years and is a excellent option to newbies: the price is 7'000 USD + shipping from miami. 1.-Post in carbon provid 2 plus modified to 24V and HD. 2.-Monitor MARSHALL 3G-hdsdi. 3.-monitor bracket custom made, with carbon rods. 4.-original provid gimbal recently serviced and new bearings, the gimbal was upgraded with long handler from MK-V. 5.-power cables x 4: (Lemo 2 pin - XLR 4 pin x 2 / Lemo 2 pin - lemo 2 pin x 1/ D-tap - XLR 4 pin x 1) 6.- Hardware box with assorted screws and connectors. 7.- custom made hard mount. 8.- provid arm. modified to load actual cameras. (f55, alexa mini, red weapon) the arm is in regular condition and his boom range was limited to support more weight. 9.- Vest steadicam provid. 10.- tripod avenger aluminum 2 reeds. With case. 11.- pelican box 1650 12.- original thermodynamics box steadicam. 13.- BFD. analogous bartech. With two motor cables, D-tap cable. Bridge and rings. 14.- beillen battery 160W x 2 , and 96w x 1, + charger. 15.- Cover Harrison long version for steadicam. 16.- 5 video cables, various sizes. 17.- various tools in a steadicam pouch. more pics by request. andresgutidp@gmail.com +573122588932 andres gutierrez
-
Digital Bartech V2-1 Receiver. Recently checked and serviced by PLC in Canada, great receiver tested and reliable. $750 OBO.
- 1 reply
-
- bartech
- remote focus
- (and 5 more)
-
Hey everyone, I´m selling two Bartech sets, one of them contains the PLC Upgrade Slider for 2 Channel Operation. Just one M1 Analog Motor is part of the package!!! All recently serviced by Pure4C in Munich Includes one complete Bartech Analog Set with M1 Analog Motor and one Bartech Digital Set with PLC Slider Upgrade for 2-ChannelOperation of Iris an Focus (no Digital motor included) (1) Bartech Focus Device System (BFD) (1) Bartech Focus Device System (BFD) with PLC Slider upgrade (1) Bartech Analog Receiver (1) Bartech Digital Receiver (1) M-ONE motor (Analog) (1) motor cable (1) power cable to connect the two receivers (one can be powered by the other) (2) Bartech 2-pin power to p-tap (11) Lens marking rings (1) assortment of gears/various pitches (1) offset bracket (1) various rod step downs (7) Extra Antennas You can use these sets separately or for two Channel operation for Focus and Iris control - both receivers, the digital and the analog one are needed for this option. I´m located in Potsdam, Germany $3999 plus Shipping asked
-
- Bartech
- Wireless Follow Focus
- (and 5 more)
-
2 complete BFD kits in good working condition. Lots of cables and extras. Everything you need. Hard case included. 5000 Located in Spain Will ship worldwide at buyers expense miguelonsteady@gmail.com
- 1 reply
-
- BFD bartech focus kit
- BFD
-
(and 3 more)
Tagged with:
-
Hi, Selling one of my Digital BarTech kit as I don't need it anymore. Backups need to move sometimes! Cosmetic wear, and great working condition. Here's the list: 1x BarTech handunit w/ antenna 1x fStop digital receiver V2-1 w/ antenna 1x Hedén M21VE digital motor w/ 0.8 gear and 19-15 reducer 2x P-Tap to Lemo 2 power cable 2x Lemo 7 digital motor cable 1x UltraThin Lemo 7 Digital motor cable 1x Arri On-Off cable (Split lemo 4 to fischer 3) 1x Red One On-Off cable (Split lemo 4 to lemo 4) 1x Red DSMC On-Off box (Box to BNC) 1x Sony F55 On-Off cable (Split lemo 4 to box to hirose 4) 2x Extra range antenna 1x 3D Printed PLC fStop receiver bracket 5x Aluminium white marking disk 1x Pelican case with custom foam Asking 4000 OBO Buyer pays shipping. Kit is located in Montreal, Canada. Will lower the price if your negotiation includes a good bottle of Scotch. Cheers, Benoît
-
The Heden Carat Wireless Focus System in the USA Through a partnership with Heden, we have secured the best pricing, customer service, and immediate delivery of Heden products. We are currently offering FREE demo's and 1-day loans of complete Heden Carat Focus kits. Please contact us immediately for details. WE ARE LOCATED IN LOS ANGELES, and can deliver straight to you on set for demo's and loans. Rental units also available, starting at $89.00 per day. SALES@CINOFLEX.COM
-
The Heden Carat Wireless Focus System in the USA Through a partnership with Heden, we have secured the best pricing, customer service, and immediate delivery of Heden products. We are currently offering FREE demo's and 1-day loans of complete Heden Carat Focus kits. Please contact us immediately for details. WE ARE LOCATED IN LOS ANGELES, and can deliver straight to you on set for demo's and loans. Rental units also available, starting at $89.00 per day. SALES@CINOFLEX.COM
-
- preston
- preston fiz
- (and 8 more)