Search the Community
Showing results for tags 'IRIS'.
-
FOR SALE Cmotion Cvolution complete kit (Focus, Iris and Zoom) All in great working order 1 x Black Peli Case 1550 2 x Heden Motors M21VE 0.8 gears (*2572/2482) 1 x Heden Motor M26VE *0.6 gear (52768) 3 x 15mm Step Downs 5 x White Blank Focus Discs 1 x Cmotion Cvolution Control Unit (0115) 1 x Zoom Module (0157) 1 x Camin Brain (0401) + 1 x Mount/Q-Release 2 x Aerials 1 x Allen Key 5/32 Imperial (to attach zoom to handset) 3 x BP-915 Batteries 7.4v 1 x Canon Charger CA-920 + Lead 2 x L to straight Motor Cables 1 x
-
I have 2 x Preston Focus/Iris Units for sale. Both kits Identical. Includes F/I Handset, 2 batteries, 1 charger, 5 blank Iris rings, 1 custom pelican case. $4700 value for: $3900 USD each. Buyer pays shipping bigwheelpictures@icloud.com
-
Hi Everyone, Helping out a fellow assistant. Selling a digital zoom kit for a Preston System. The package includes a Preston Digital Micro Force, a Preston DM2 motor, and a Preston Micro Force Y cable. It can be used as a stand alone system or you can combine it with your Preston MDR for remote zoom. The Digital Micro Force is in great shape and works smoothly. The Preston DM2 Motor is in excellent condition and runs smooth. The Cable has been tested and it works. It is a 3 pin power connector. All three pieces are currently in Toronto, Canada and can be shipped anywhere at the b
-
Time to sell my one owner, never dry hired, recently serviced & extensive 2 Motor Preston kit. Kit includes. 1x Preston HU3 - G4 Blue Dot 1x Preston MDR2 G4 Blue Dot 1x Preston F/I G4 Blue Dot with External Aerial Upgrade 1x Preston DM1X Motor 1x Heiden M21VE-L Motor Cables. 2x 20 inch Right to Straight Motor Cables 1x 19 inch Right to Right Motor Cable 1x 24 inch Right to Right Motor Cable 2x PWR/Camera Run Y Arri 3 pin RS cables 1x PWR/Camera Run Y PV Cable 1x PWR Arri 3 pin RS Cable 1x PWR 4 pin XLR Cable 1x PWR D-Tap Cable 1x Camera Run Arri 3 pin Cable 1
-
A reluctant sale of my Bartech remote focus kit. I'm selling my entire steadicam kit with a change of direction for my work so it's all up for grabs. This is a very complete kit that can go to work right away. HedÈn M28VP with .4 .5 .6 .8 gears M-One with .4 .5 .6 .8 plus spares (plus extra wide .8 gear) HedÈn M26P (this is the older style horizontal motor, nice back up if nothing else) Aaton to BFD power Aaton camera run Panaflex to BFD power+camera run Glidecam BFD power 4 x motor cables Right angled motor cable BFD to BFD piggyback short BFD to BFD piggyback long Dtap and 4 pin XLR p
-
In very good condition, located in LA, buyer pays shipping.
-
I have for a sale a nice two camera Iris setup. Or you can use this as a two channel system on one camera. Included is the following: 1 Bartech Digital BFD w/ 2nd channel side slider 2 PLC Electronics Fstop Wireless V2.1 Receivers 2 Ptap power cables 1 3pin RS Arri power cable 3 PV 2pin Lemo power cables 4 rechargeable Li-ion 9V batteries w/ case 1 two port battery charger 2 aluminum focus rings with 3 screws 14 focus mark strips 2 1/4 wave Rx antennae 1 1/4 wave Tx antenna 2 1/2 wave Rx antennae 1 1/2 wave Tx antenna Original BFD circuit board (in case you want to remove the
-
Hi, I have a complete Scorpio kit to sell, great condition (second owner - both were camera assistants); 3 Heden motors - cables, brackets and backups listed below. Works flawlessly, has been fully revised by Cramped Attic from Vancouver in may 2014, the front glass has been changed. 10 000 usd + shipping fees (ships from Montreal, Canada). If you have any question, please contact me at christian@nouba.com, or 514-235-3008. SCORPIO KITHand Unit Motor Driver box ( MDR) Remote Iris Iris motor Focus motor Zoom motor 10 discs 4 NP-QM71D batteries 2 NP-FM50 batteries 1 BC-VM10A
-
I'm looking for a Preston single channel hand unit. Thank You randystone@me.com
-
- Preston
- single channel
-
(and 3 more)
Tagged with:
-
Up for sale is a Preston 3 Channel Wireless System. It was used as a backup System and is in very good condition. The package is ready to shoot. It is located in EU. Asking 12.000,- Euro 1 PRESTON FI+Z Handunit w. Rubbergrip (Sr# 2154) 1 PRESTON FI+Z Transmitter (Sr# 49213) 1 PRESTON Microwave Receiver MR (Sr# MR-1186) 1 PRESTON 3 Channel Motor Driver MDR-1 (Sr# 1327) 2 PRESTON Motor DM1 with 15mm Rod (Sr# 1080, 1079) 1 PRESTON Iris-Extension Unit 2 PRESTON Fast Charger 4 Batteries Cables: 2 Motorcables 1 GPI-PRO > MDR PwrCable 1 MDR PwrCa
-
Purchased a few years ago and I just do not use them enough to warrant keeping them, despite their versatility. They have been used for *maybe* 6 commercial days. No need for downsizers and no need to pull the mattebox off to add a motor :) Comes with 3 2 1/4" and 2 4 3/4" shafts. Each UniClamp retails for $165.00 and each additional shaft retails for $35.00. Total retail price of $565.00 before sales tax. My price is $450. Located in Los Angeles. Shipping will be an additional charge (can't see it being more than $7 USPS flat-rate). Thanks!
- 1 reply
-
- Jerry Hill
- iris
- (and 5 more)
-
Selling my Preston FIZ 1 setup. Solid and reliable! Hand Unit just serviced, motor rebuilt. Everything works, no BS. MDR-1 Motor Driver Hand Unit 1 FI+Z Transmitter 3x DM-1 Motors 3x Preston Motor Brackets (short, medium, long) Microforce V+F Control Microforce Bracket 3x HU-1 Batteries Fast Charger w/ AC cable 12 Focus Marking Rings 64 pitch gear (PV Iris) 48 pitch gear (PV Zoom) Backup Transmitter Antenna 3x 15mm step-down bushings (Arri) 3x 5/8” step-down bushings (PV) Short MF to HU cable 50’ MF to HU cable 50’ Control Cable (to hardwire hand-unit) 3x Green Motor