Search the Community
Showing results for tags 'Modified'.
Found 3 results
I am looking to have some customized parts made for my Steadicam Scout; specifically the monitor - I am wanting to add a monitor yoke to attach to my center post up higher.. I need to know the diameter of the lower stage post and the upper stage post.. these parts are so expensive
I'm selling a customized Steadicam Ultra 1 : Standard: - 4 section telescoping Carbon Fiber Post (24-71") - 12V/24V - All No-Tools - Tilt Head - Frame Lines Generator - 5" Green Screen 16:9 Monitor Customized Extras: - Extra direct HD line (HD SDI) (additional tiny HD coaxial cable 75 Ohm inside the post. BNC connector on top and bottom of the sled.) - Additional 2 wire cable inside the post (Cinch connector on top and bottom of the sled. Could be exchanged to a Lemo or any other connector easely. I used it for Tally) - V-mount Plate Modification (The V-mount plate can easely be removed and it works with the original Ultra 24V batteries again, or you can exchange the V-mount to an AB plate) - Adapter Plate for 24V with two batteries - Modified Fracolizer system. (It has a battery plate mounted. So you can attach a third battery on the bottom of the sled. The Fracolizer plate can be adjusted for and aft or being removed completely. It has a Lemo FHG.2B.303 connector which you can plug in the HS connector on the lower right side of the sled. The sled has a built in switch with which you can turn the third battery on or off thru the HS connector. What will you get: - Ultra 1 HD Sled with extra wiring and customized options - 5" Ultra green screen CRT 16:9 monitor with CG-balanced monitor bracket and bubble (an LCD monitor can be replaced easely if you prefer the non-green way - I mostly used my Transvideo, see picture) - Sled-to-Monitor cable - Modified Fracolizer System - Long Dovetail Camera Plate - Ultra Dynamic Spin and Docking Bracket and two docking rings - Docking Ring for the Hill Balancing Bracket (if you already using it or intend to do) - Original sled hard case (with wheels) Asking price is EUR 19'500 or USD 25'500 This sled is not a regular Ultra sled. It is more a regular Ultra sled with all the bells and whistles of today's needs added. Everything is located in Zurich Switzerland. You can stop by and have a look at the rig anytime. You can pick it up or I will ship it anywhere (add shipping cost). Thank you for your interest. Lukas ( Transvideo, Recorder, Batteries and ALEXA are NOT included! ;-) )