Search the Community
Showing results for tags 'Steadicam'.
-
Flowcine Black Arm now taking pre-orders
OpticalSupportLtd posted a topic in News, Events, Workshops
Flowcine are now taking pre-orders for their new Black Arm. http://www.flowcine.com/content/11-black See it in action on the Optical Support Mantis Rickshaw here: https://www.youtube.com/watch?v=wySDakyGgvc You can pre-order through OS by emailing info@opticalsupport.com, or through the flowcine website if you're outside of the UK. -
MK-V Infinity Sled About three years old in great condition: - 2" Deluxe Four-stage post capable of being extended for super-low mode or super-high mode shots - V3+ D-Box and J-Box with HD-SDI in/out - Deluxe V3 Gimbal - Full set of Power Cables: - (2) Arri 24v - (1) Arri 12v - (2) 12v for Varicam 35 - (2) Epic - (2) Preston MDR - (1) Panavsion - (6) BNC Cables ARMS: - Pro-GPI Arm with two blue and two black canisters - 3A Luna Arm (used as backup and in great condition) VEST: - Pro-GPI Vest just under two years old in great condition BATTERIES: - (8) Beillen Batteries - (1) Quad Charger w/ power cable MONITORS: - Small HD DP7 Pro High Bright - Sony PVM - 740 (back up monitor) - Walter Klassen "Garfield" Vehicle Mount - Taradek Bolt Includes: Transmitter/Receiver - Sony Betacam (used as Practice Camera) - Rain cover - Two shelf Magliner - Stand CASES: - Sled Case (Pelican) - Monitor/Cables Case (Pelican custom cutout) - Battery Case (Porta Brace also custom cutout) - Vest/Arm Case - Garfield Case (Pelican) Would like to sell as a package asking $60,000 Reason I'm selling is that I am shooting more and no longer operating Steadi If you are interested PLEASE EMAIL ME DIRECTLY do not post questions here, I don’t check it often enough. Direct emails will get very quick responses. Thanks Ludovic Littee llittee@gmail.com 917.855.7019
-
I am selling a Steadicam Ultra 2 sled with the 8" Transvideo HD Monitor and 6 Steadicam Power Cubes. Cost me £37,000. Kit is in mint condition - looks brand new. Has had little use. Complete in original Steadicam boxes. Looking for £15,000. No VAT Pictures on request. Also have a Master Film Arm in fair condition. Works well. £2,500 Master Film Vest. Fair condition £1500 Genio Remote Focus System 2- Channel £1500
-
MK-V-V4 rig for sale, including: - MK-V-V4 HDDSI Sled: DBox + JBox + HDSDI Telescopic Centerpost + Pro guimbal + Battery Rack + original monitor arm - Walterflex vest - Long post. To super high mode or super low mode. - Monitor. Transvideo Rainbow HD SBL. With bubble level - GPT Pro Arm TITAN with 4x Blue canister and 4x Black canister - Cables: 1x 4 pix XLR to 8pin Lemo (monitor), 1x 8pin Lemo to 8 pin Lemo (ekstra), 2x 4pin XLR to 3 pin Lemo, 1x Link Powercable 4x pin Lemo til 4pin XLR, 1x Arri 24V - Golbalmediapro 4 pos charger - 2x GMP Li230S-HW Battery 2x GMP Li160DS Battery - Tools and spares - 2x Camera Plate for Sony broadcast - Betz Top Stage - Steadicam Stand American - Cases: 1x Pelican iM3075 for monitor,pro arm,charger and cables, 1x Pelican iM3200 for battery,Sled,Tools,Cabels, Accessories, 1x Tube case for the Steadicam Stand, 1x Soft bag of the Walterflex vest This a complete kit and it’s in very good conditions. We do worldwide shipping. Please feel free to call or email with any questions or offers. email: tjafri@jt-productions.com Phone: + 47 48140270 Price is 29500 euro. Shipment are not included. We are based in Oslo, Norway.
-
Hi guys,im looking for Pro sled to buy, Pls let me know if anyone is looking to sell,thanks
-
Calling all aspiring or established Steadicam operators and film professionals! Join us at OS HQ (157 - 163 Marlborough Rd, London N19 4NF) on Monday for a free demo of the first Light Ranger 2s by Preston Cinema Systems to hit the UK.
-
GPI-Pro II rig for sale, including: - PRO II SD Sled: DBox + JBox + SD Telescopic Centerpost + Pro guimbal + Battery Rack + original monitor arm + Recorder mount + plate - SteadiRig Arm ( up to 63 pounds ) . - Pro Vest - Super post. To super high mode or super low mode. - Kit follow focus: Bartech with m-one motor. Kit of brackets, rings, cables, etc. - 3 gold mount batteries and twin charger. - Monitor. Transvideo Cinemonitor II SD. With bubble level - Wireless video transmiter PAL Teletest. - 2 T handle allen wrench (guimbal and arm) - Tools and spares. - Cables: 2 monitor cable ( power and video from the lower box ), AUX PWR ( lemo 2-pin to XLR4 upper box ), 2xCAM PWR (lemo 3-pin to xlr4 upper box ), Power tap to xlr4 ( from baterrie power out ), 2 BNC, and more xlr4 power cables… - Cases: 1 small peli case for follow focus kit. 1 1650 peli case for arm and vest, 1 anvil case for sled all of them with foams and handmade inlays - Docking bracket - tripod This a complete kit ready to go and it’s in very good conditions and never was rented. We do worldwide shipping. If you are interested we can do an sled upgrade from sd to hd, but this upgrade is not included with the price. Price is 29500 € or best offer. Tax and shipment are not included. We are based in Barcelona, Spain. Please feel free to call or email with any questions or offers. Mail. carlos@rocksteady.es alex@rocksteady.es tlf. 0034 659536694
-
Greetings all. I am Listing my baby. My Clipper 24 Sled She has served me well, but alas, i have to make room for some new toys. This is a LIVE TV rig. And has been shooting Broadcast TV here in NYC. She is 100% ready to go out of the box. All you need is an HD monitor, Batts, a BFD and you're ready to go. She is in PRISTINE condition. This is not a slacker rig. Her last mission was the 2015 NYC Marathon. Mens Elite!! This is a Clipper 24 with V-Mount power supply. Sorry all you AB Lovers, but i like V-mounts better. Completely upgraded with new HD-SDI wireing. It includes all the cables and whatever extra goodies i have that i don't need anymore. You get.... Steadicam Clipper 24 with V-Mount battery supply and Tilt Stage Docking bracket 2 Camera Plates 2 Tally Sensors 2 Monitor/Video/Tally Cables 12V camera power supply (4 pin xlr) Monitor Rods and Bracket (NO MONITOR) Steadicam Hard Case The hard case needs a little work. One of the wheels was damaged by Delta. Thermodyne is the maker of the case and it has a Lifetime guarantee. I have been assured by them that the wheel can be fixed....free of charge btw. Asking Price $12,500 OBO Email me....... Steadimanny@mac.com
-
Hello everyone, I'm selling my Steadicam Flyer LE with the 19lbs arm capacity and it has been recently serviced by Tiffen. I've used this rig for most of my career. It’s perfect for anyone starting out with steadicam. Well maintained and works best for small DSLR cameras to stripped down RED cameras. I also had a machinist bend a piece of metal for me to make a yoke for my Small HD monitor. I can add it to the package if you want it. I've had the sled upgraded to an HD signal by Chris Konash of East Coast Cables and upgraded the monitor to the Small HD DP-7 LCD monitor which is an option or any other monitor you would like to use. Standard Flyer vest Flyer LE sled, 12/24 volt with two AB - mount battery mounts upgraded HD Signal Rewired by Chris Konash Flyer LE dual articulating iso-elastic arm with bag up to 19lbs of weight Docking bracket C stand Dovetail plate 2 Anton Bauer Hytron 50’s batteries Soft transport bag 1650 pelican hard case Small HD DP-7 LCD monitor (optional) with Anton Bauer Hirose to D-Tap, P-Tap Power Cable - 3 ft. RCA-BNC adapters are included as well. I am looking to sell this as a full kit for $5500 With Small HD DP7 monitor for $6,800 HC Batteries shown not for sale. Buyer pays for shipping Feel free to email me at: matthew@steadi-matt.com
-
I am regretfully selling my amazing starter sled, the Ultra 1. I am selling because I recently upgraded to a more powerful rig to eventually get the artemis trinity setup. I also am expecting a baby boy in april so I need to make some room! I bought this sled from James Baldanza a few years back and it has been nothing but great. I am looking to get $12,000 for the sled (and hard case), a steadicam stand, IDX Battery Charger, (7) E-HL9s IDX Batteries (one of which charging lights doesn't work anymore), a bunch of cables, and I am throwing in the IDX Camwave HD/SDI wireless transmitter which even though you don't see around anymore still works in a jam. The sled was recently serviced by Tiffen, I have had it upgraded with an HD/SDI line, as well as changing out the old gimbal to the new steadicam ultra 2 gimbal. There is a third battery plate on the bottom of the sled, and has three different options for battery placement for power. This sled is a super post (27" to 71") so it can go super high mode or super low mode very quickly and easily. It still has the fore/aft - left/right top stage wireless trim control which is one of the few sleds that still has this amazing option. The tilt stage works like a wonderfully and maintains dynamic balance regardless of where you want to angle the camera. I bought an HD/SDI wondland monitor to replace the super bright monitor from Tiffen because it was an older SD monitor and I wanted the HD. It is a cheaper monitor, but works wonderfully and I have rarely had a problem with the light. It can be powered off the sled or with an IDX battery on it's back. This setup also comes with three camera plates (two long and 1 short), three posts (12", 3.5" and 5"), the ultra 1 low mode handle which has been upgraded to work with this ultra 2 gimbal, a 12V power cable, arri alexa power cable, a few BNC cables, the redbyte decimator downconverter (for use with Tiffen superbright as a backup), cables for the decimator made by konash, and also power cables for MDR2 and MDR3 systems. Please feel free to call or email with any questions. Devin Ladd 860-237-0754 devinmladd@gmail.com
-
Hi there, i'm selling my much loved and well maintained steadicam ultra 1, with preston (2) remote focus this is a complete kit ready to go. the arm has been serviced recently with new springs. each joint has been replace in the last 5 years. i will take some detailed photos asap. Kit includes: steadicam ultra sled arm, vest 3 channel preston, handset (2)\, three x motors, digital microforce, mdr, 3 x batteries )new cells 8 x IdX batteries (v- lock) cables = motor, power, bnc's etc (with back ups) teradek bolt 1 x tx, 2 x RX cases for everything. i'm in the process of writing up a complete inventory. - there's a load of stuff. if you would like to see photos i can email. cheers, dave -
Hello, I'm looking for a cheap, maybe used, vest and arm kit. i can pay 100-200 usd. please contact me if you live in the moscow area, or are able to ship to moscow. Contact me at powerhousemotiongraphics@gmail.com
-
Hi there, i'm selling my much loved and well maintained steadicam ultra 1, with preston (2) remote focus this is a complete kit ready to go. the arm has been serviced recently with new springs. each joint has been replace in the last 5 years. i will take some detailed photos asap. Kit includes: steadicam ultra sled arm, vest 3 channel preston, handset (2)\, three x motors, digital microforce, mdr, 3 x batteries )new cells 8 x IdX batteries (v- lock) cables = motor, power, bnc's etc (with back ups) teradek bolt 1 x tx, 2 x RX cases for everything. i'm in the process of writing up a complete inventory. - there's a load of stuff. if you would like to see photos i can email. cheers, dave
-
Hi there, i'm selling my much loved and well maintained steadicam ultra 1, with preston (2) remote focus this is a complete kit ready to go. the arm has been serviced recently with new springs. each joint has been replace in the last 5 years. i will take some detailed photos asap. Kit includes: steadicam ultra sled arm, vest 3 channel preston, handset (2)\, three x motors, digital microforce, mdr, 3 x batteries )new cells 8 x IdX batteries (v- lock) cables = motor, power, bnc's etc (with back ups) teradek bolt 1 x tx, 2 x RX cases for everything. i'm in the process of writing up a complete inventory. - there's a load of stuff. let me know if you'd like to see anything photographed in particular. cheers, dave
-
Hello! I'm looking to sell a LX-Vest in very good used condition. Comes in Steadicam Vest-Bag. It's based in Vienna, Austria and im looking to get 2650€ + VAT Cheers Ben
-
Selling my Fawcett Exovest. The Vest was purchased May 2015 from Betz Tools, and is located in Berlin, Germany. It is in perfect working order and has some minor cosmetic wear and tear. It has been in use for 6 months. I'm apparently a to old fart and can't get used to this new vest. It's a shame to sell it, but it doesn't work for me. Price is €5900 EUR firm + shipping outside of Germany VAT applies for Germany buyers no VAT in the EU with a valid VAT-ID number or outside of the EU Cheers
-
Includes a vest, an arm, a customized sled with a transvideo 6"monitor, plus an original green monitor. With power cables, video cables, hex key for the guimbal and flycase. 4 pag batteries, and a charger, The equipment are in Barcelona Spain Price 3,800.-€ Contact: Joan Morató 34 607228812 Includes the following Pro-Vid equipment: - Upper sled: stage, plate, center post & guimbal. - Lower sled: Cinemonitor 6" transvideo LCD, monitor bracket with level and battery mount for pag batteries. - Original Green Monitor - 4 paglok 5.0 13,2v batteries: - 1 battery charger PAG AR Series 4 channel . - Provid vest - Adapter to use with standard socked block - Provid arm - Docking bracket - Power cable (4 pin XLR to small 2 pin Lemo) - 2 Power cables (DC to 4 pin XLR) - Video cable (BNC to BNC) - T-handle Allen wrench. - Low mode kit. - Spares & tools. - Manual. Attached Images
-
-
Hi Guys, I'm exited to share that the NBStabilizer Arm stock is about to be ready, and will be presented at the NAB show. The Arm weights only 2.6Kg (5.7Lb) Weight range: 0-28Kg (0-62Lb) - No minimum weight required Boom range: 80cm (31.5 inch) I'd be happy to answer questions. Will update soon regarding the booth location.
-
Here's an article from last year that has a video embedded in it that shows some shots off the "Impossible Shots" demo that he created to show off what the Steadicam prototype could do. Not sure if this has been posted before but I didn't find it on my initial search of the forum, so, for anyone interested in a little history, here it is! http://www.hollywoodreporter.com/news/steadicam-inventor-reveals-impossible-shots-725346-
- 1
-
-
- Steadicam
- Hollywood Reporter
- (and 3 more)
-
I am looking to sell my Steadicam Flyer. I am the second owner, and didn't get to use it as much as I would have liked due to moving on to other projects. I would rather someone put it to use than it just sit in storage. Fun to fly and in great working condition. Only issue is a small crack in the plastic of the vest (shown in pics), but does not affect performance at all. Specs: Sled -Holds up to 19 lbs -16x9 monitor -V-mount batteries (includes 2 batteries and charger) -Weight plate for lighter cameras (see image) cost over $200 -Dove tail Arm with sleeve Hex tool Steadicam Stand Docking bracket Case Various power/video cabels SDI to Analog converter Asking $5,000 USD for it all (I'll pay the shipping)
-
Cleaning out the shop and selling off some old Steadicam monitors. An EFP green screen, an EFP lcd and a teletest for parts. Green Screen: http://www.ebay.com/itm/252111524293?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 EFP LCD: http://www.ebay.com/itm/252111530916?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 Teletest: http://www.ebay.com/itm/252111535633?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
-
My last. Does it make sense? https://www.youtube.com/watch?v=wf_ySBlZjKw
-
Hey guys and girls, I have an ULB music video shoot Friday night (September 25) and just found out that we're sub-renting a camera package from another production which includes the Alexa XT, Hawk Anamorphics (potentially V-Lite), a remote focus and Teradek Bolt. Though in the past two years I've been able to push my Flyer LE to it's maximum and then some without any problems, this setup is several to ten pounds over the weight capacity of my system. Does anybody have a rig more commensurate to this camera package that you could rent out for the night? Any advice is also appreciated. Best, Greg Arch
-
Hello all I'm selling my Steadicam Flyer LE with the 19lbs arm capacity. I've used this rig for most of my career. It’s perfect for anyone starting out with steadicam. Well maintained and works best for small DSLR cameras to stripped down red cameras. I also had a machinist bend a piece of metal for me to make a yoke for my my Small HD monitor. I can add it to the package if you want it. I've had the sled upgraded to an HD signal by Chris Konash of East Coast Cables and upgraded the monitor to the Small HD DP-7 LCD monitor. My Flyer model includes: Standard Flyer vest Flyer LE sled, 12/24 volt with two AB - mount battery mounts upgraded HD Signal Rewired by Chris Konash Flyer LE dual articulating iso-elastic arm with bag up to 19lbs of weight Docking bracket C stand Dovetail plate 2 Anton Bauer batteries Soft transport bag 1650 pelican hard case Small HD DP-7 LCD monitor I am looking to sell this as a full kit for $6000 not looking sell parts individually. HC Batteries shown not for sale. Buyer pays for shipping+ email me at matthew@steadi-matt.com or by text (845) 891-5978
.thumb.JPG.8daf74b1d62a7af767d3afc25c827d3e.JPG)
