Search the Community

$4800 for everything Read below for everything in this package I am selling my new condition Steadicam Aero 30 system. I have never used the Steadicam, Arm, Vest or Steadimate, the Ronin-M has been used twice. Selling as I purchased for a production that didn't materialize, the screen cover is still on the monitor of the steadicam. The Vest has just been in a box with the Arm, and the steadicam has been sitting on it's stand. I have once mounted a plate and balanced a camera in anticipation but never used. Steadicam Steadimate, still in box unopened AERO 30 Stabilizer with A-30 Arm V-Mount Battery Mount with D-Tap Output 20 lb Payload Zephyr Vest 7" SDI/HDMI 1000 cd/m² HD Monitor 1/2" Deluxe Docking Bracket BNC Video Cable / Mini-XLR Monitor Cable Telescoping 22.5-35.5" Carbon Fiber Post Tool-Free Adjustments 8 x Balancing Weights DJI Ronin-M with 3 batteries Nanuk 940 case DJI Thumb Controller DJI Tilt-Bar extension Rods DJI Ring for Ronin-M All of this retail at BH is $7121 - Would like to get $4800 net to me. It is all in superb condition. Will sell without Ronin-M and Steadimate for $4k I am in Irvine, I have sold a lot of stuff on RedUser and can provide references if needed. I will split ground shipping with someone. Would prefer a wire transfer to avoid fees. If you are local you are more than welcome to come to my studio and see everything. It is all like new.

Steadicam ULTRA 1 Full package for sale This is a fantastic Steadicam ultra package, It comes with everything you need to operate onset. Preston, Teradek 300, ultraBrite2 monitor, and a large amount of hardware and tools. The ultra series set the bar high and has never let me down. The Vest is in good condition. It’s light and unobtrusive and works well with the body. It comes with its own vest bag and a case for easy transport. The UltraBRITE2 monitor displays HDSDI, HD component and composite video. - every format you need, directly. It’s very bright 8.4” monitor @1400 nits – perfect for daylight viewing. Anti-reflective coatings won’t burn out your eyeballs if you happen to catch a reflection from the sun or a big light.The Ultra2 monitor mount is strong, easy to flip for low mode, and boasts a wider range of positions, both vertically and horizontally. The Preston included with this rig is a very comprehensive kit, comprised of MDR2 and and HU2 which uses the Omnishot battery adapter for the HU2. Uses Sony style FM50 batteries. It has a large array of batteries and cables and all come housed in a laser cut case. 8 Steadicam Power Cube batteries and 2 IDX chargers housed in a laser cut thermodynamic case. Tera dek bolt 300 video link system The following is the full inventory list and case weights 1. (U1) SLED . 25 KG: 300mm(D) x 550mm(W) x 865mm(L) 1 x Ultra1 Steadicam Sled (#09020001) (Mod:252-0000) 1 x UltraBrite HD Monitor (#000177) 2 x .625” Monitor Rods 1 x Preston MDR-2 (#1285) & Transceiver Lid (#MT-1694) 1 x Top Stage Remote 2. (U1) VEST AND ARM . 24 KG: 400mm(D) x 430mm(W) x 750mm(L) 1 x Ultra1 Vest & Carry Bag (#06020072) 1 x Ultra1 Iso-Elastic Arm & Carry Bag (Mod:2527200) (#07020012) 1 x Sled Docking/Balance Bracket 1 x Hill Standby Cover & Bag 3. (U1) SET-CASE . 22 KG: 260mm(D) x 430mm(W) x 660mm(L) 1 x Preston FI+Z II Hand Unit & Neck Strap (#2624) & Antenna (#49694) 2 x Preston DM-2 Digital Motors (#2817) (#2819) 1 x Preston DM-1 Digital Motor (#1830) 10 x Preston Focus Scale Marker Rings 3 x Sony (Preston) Batteries (#NP-QM71D) (U1) PELICAN - MOTOR-COGS - 1 x 0.80M Output Gear 1 x 0.60M Gear (Fujinon) (Video, Focus, Zoom) 1 x 0.50M Gear (Canon) (Video, Zoom, Focus) 1 x 0.40M Gear (Fujinon) (Video, Iris) 1 x 48 Pitch Gear (Panavision Zoom) 1 x 64 Pitch Gear (Panavision Iris) Set of Gear Screws (U1) TACKLE BOX – CAMERA SCREWS - 4 x (3/8) Camera Screws 4 x (1/4) Camera Screws 4 x (3/8) – (1/4) Thread Adapters 2 x Low Mode Gimbal Screws 6 x Weight-Plate Thumb-Screws Assorted Spare Screws 1 x Ultrabrite HD Monitor Sunshade 2 x long Camera Mounting Plates 1 x Slanted F-Bracket (U1) MONITOR / BNC CABLES - (U1-1) Ultrabrite LCD Monitor Cable (U1-2) Ultrabrite LCD Monitor Cable (U1-3) LW BNC (800mm) (U1-4) LW BNC (800mm) (U1-5) LW BNC (800mm) (U1-6) LW BNC (800mm) (U1-7) LW BNC (400mm) (U1-8) LW BNC (400mm) (U1) MOTOR BRACKETS - 1 x 2-N-1 Motor Mount 1 x Arri Iris Rod Clamp 1 x Dogbone (19mm/15mm) & 3.5” 15mm Rod 2 x 7” 15mm Motor Rods 1 x 3.5” 15mm Motor Rod 1 x Gold (5/8) Spigot (U1) HILL - PAM BRACKETS - 2 x 19mm PAM Swing Arms 2 x 15mm PAM Swing Arms 3 x PAM Standard Clamps 2 x PAM Off-Set Clamps 2 x Blue Preston (19mm/15mm) Spacers 3 x 3” 15mm Motor Rods (U1) TOOLS - 1 x Bondhus Metric Allen Keys 1 x Bondhus Imperial Allen Keys 1 x Large Flat-Head Screw-Driver 1 x (4mm) Flat-Head Screw-Driver 1 x (No.1) Phillips Screw-Driver 1 x (No.2) Phillips Screw-Driver 1 x Tape Measure 1 x Dual Level 1 x Scissors (U1) WEATHER COVERS - 1 x Monitor Rain-Cover 1 x Lower Sled Rain-Cover 2 x Arm Rain-Covers 4. (U1) HARDWARE . 26 KG: 220mm(D) x 475mm(W) x 660mm(L) 1 x Scaff-Clamp Hard Mount (NZ) 3 x Weight-Plates & Dovetail Clamp 1 x Omnishot (Preston) Dual Charger (U1-3) 1 x Omnishot Charger Power Cable (U1-4) 1 x Omnishot Car Charger Power Cable 1 x 1/4” T-Hex Tool (U1) POWER CABLES - (U1-1) 24V Sony (U1-2) 24V Sony (U1-3) 24V Arri (250-0093) (U1-4) 24V Arri (250-0093) (U1-5) 12V Arri (250-0045) (U1-6) 12V Arri (250-0045) (U1-7) 12V Red (800-0106) (U1-8) 12V Epic (U1-9) 24V Amira (U1-10) 12V Genesis Dual-Battery Plate Cable (1.8m) (U1) COMMAND CABLES - (U1-1) Arriflex & Moviecam 3-Pin (4521) (U1-2) MDR2/PV Genesis (4533) (U1-3) Sony VTR (4435) (U1-4) MDR2-Epic (4546) (U1-5) Red Digital (4543) (U1) PRESTON CABLES -1 (U1-1) Preston MDR-2 Power Cable (U1-2) Preston MDR-2 Power Cable (U1-3) Preston Motor Cable (U1-4) Preston Motor Cable (U1-5) Preston Motor Cable (U1) PRESTON CABLES -2 (U1-6) 24V (Panavision) MDR-2 Power Cable (4472) (U1-7) 24V (Arri/Moviecam + 24VDC) - (3 Pin RS) MDR-2 Power Cable (4499) (U1-8) D-Tap - MDR-2 Power Cable (U1) ANCILLARY CABLES - (U1-1) HD Monitor RGB/Data (252-0116) (U1-2) HD Monitor RGB/Data (252-0116) (U1-3) HD/SDI Video Cable (Camera/Sled) (252-7922) (U1-4) STD BNC (2m) (U1) SPARE PARTS - 1 x Gimbal Remote Battery 2 x Lower-Sled Fuses 2 x Monitor Fuses 2 x Accessory Dovetail Plates 1 x Preston Iris Marker Plate 1 x Set of Preston Antennas 1 x Arm-Post Spring Clamp 1 x Docking Collar 2 x Vest Clamps 1 x Cable Connectors 1 x Tiffen Sled Tension String (U1) ANCILLARY TOOLS - 1 x (3.5mm) Flat-Head Screw-Driver 1 x (No.0) Phillips Screw-Driver 4 x Jewellers Screw-Drivers 1 x 3/8 Ring Spanner 1 x Locktite 1 x Cleaning Brush 1 x 8” Crescent 1 x Genesis Dual-Battery Plate 1 x 1ft Arm Post & Locking Collar 5. (U1) BATTERIES . 20 KG: 245mm(D) x 290mm(W) x 580mm(L) 8 x IDX Power-Cube Batteries 2 x IDX Simultaneous Quick Chargers (Mod:VL-4S)(#K2-06809) (#K2-07422) (U1-1) IDX Quick Charger Power Cable (U1-2) IDX Quick Charger Power Cable 66. (U1) VIDEO-LINK . 6 KG: 160mm(D) x 320mm(W) x 410mm(L) 1 x Tera Dek Bolt 300 HD Transmitter (#720003651) 1 x Tera Dek Bolt 300 HD Receiver with V-Lock Battery Mount (#72501354G) 1 x Tera Dek Bolt 300 HD Receiver (Spare) (#72500419G) (U1) VIDEO-LINK CABLES - (U1-1) Tera Dek - Hirose Power Cable (U1-2) Tera Dek - 12V Arri Power Cable (U1-3) Tera Dek - (3-Pin RS) Power Cable (U1-4) Tera Dek - (Panavision) Power Cable (U1-5) Tera Dek - D-Tap Power Cable (U1-6) Tera Dek - (240V) Mains Adapter (U1) TACKLE BOX – VIDEO CONNECTORS – Various (BNC/RCA) Connectors 7. (U1) STAND . 10 KG: 250mm(D) x 250mm(W) x 1200mm(L) 1 x Steadicam Sled Stand Our Purchase price is (USD) $28,000.00. We are happy to ship world wide at purchasers expense. These costs will be worked out depending on buyers location. All listings are sold as is, where is. Happy to answer any questions and provide any more detailed information or photos This listing is also listed elsewhere Equipment listed in New Zealand.

Steadicam ULTRA 2 for sale : The Ultra 2 is an all encompassing system that is user-friendly and versatile. It’s designed to make the user’s operating more precise and hassle free. Have been very impressed with this system over the years and will be sad to see it go. The Vest is in good condition. It’s light and unobtrusive and works well with the body. It comes with its own vest bag and a thermodynamic case for easy transport. The UltraBRITE2 monitor displays HDSDI, HD component and composite video. - every format you need, directly. It’s very bright 8.4” monitor @1400 nits – perfect for daylight viewing. Anti-reflective coatings won’t burn out your eyeballs if you happen to catch a reflection from the sun or a big light.The Ultra2 monitor mount is strong, easy to flip for low mode, and boasts a wider range of positions, both vertically and horizontally. The revolutionary G-70 arm is light, strong, and it can lift 13 to 70 pounds. The boom range exceeds any other arm out there – 32”. The G-70 arm is by far the smoothest, most responsive arm I’ve ever owned. You can feel how the arm behaves, regardless of the weight carried. With the “Geo” feature, you can tune your arm to your preferences for each shot. Even the arm post system incorporates an adjustable drag that does not change when you change posts. Really can not fault it. The Arm comes with its own Arm bag to protect it while out of the case and is in good condition. This is a slimmed down kit containing: Case1 Ultra 2 Sled UltraBRITE2 monitor Case 2 G-70 arm + arm bag Vest + vest bag Upon inquiry we can supply case weights as well as additional detailed photos as requested. Our Purchase price is (USD) $28,000.00. We are happy to ship world wide at purchasers expense. These costs will be worked out depending on buyers location. All listings are sold as is, where is. Happy to answer any questions and provide any more detailed information or photos This listing is also listed elsewhere ​Equipment listed in New Zealand.

Steadicam Masters Series - Complete Rig This full kit contains everything you require to fly full sized packages. Would be a perfect beginner rig for someone stepping up into an operator role or moving to becoming more established in the industry. The Sled is in good condition with only cosmetic wear and tear. It has been well looked after for its age. The post has been retro fitted with HDSDI and the monitor has been replaced with a new Panasonic high-performance, portable 9-inch LCD monitor. With its new IPS LCD panel boasts best-in-class 1280 x 768 WXGA pixel resolution. The LH910 utilized on the sled (duel rail system monitor mount) is perfect for field or studio work with 176 degree vertical and horizontal viewing angles, the widest offered by any LCD display, the LH910 delivers exceptional imagery and superb color accuracy, and professional interfaces including HDMI and 3G-SDI. For Full information on the Panasonic LH910 monitor please view the following link - https://na.panasonic.com/ns/22722_BT-LH910G_Brochure__PDF_-_.pdf The Sled has been upgraded to the Anton Bauer gold mount system and comes with 4 Anton Bauer Dionic 160batteries. Dionic 160 weighs 30% less than a HyTRON 120, has 30% more capacity. Comes with quad charger. The Real Time readout provides an estimate of remaining run-time based on the current power draw. We have made our own Lower Sled Weight system. (view photos attached) The Tiffen Mastersseries iso-elastic arm. Completely rebuilt by Tiffen. Feels like new. Provides even lift throughout larger range of lifting strength and position. The Master Series Vest is still in very good condition and has been continually well washed and spare vest clips should they ever be required. 
Lightweight - Adjustable in all dimensions.
Reversible adjusting bridge with Steel Arm receiver socket 
Back transversal straps for ultra-snug fit & Quick release equipped All equipment comes in good quality hard cases. Steadicam Master Series Package Overview Case 1 - SLED 1 x Masters Steadicam Sled 1 x Panasonic HD/LCD Monitor 1 x Operators Manual Case 2 - VEST AND ARM . 1 x Masters Vest & Carry Bag (#199457V) 1 x Masters Arm & Carry Bag (#199413) 1 x Sled Docking/Balance Bracket Case 3 - HARDWARE . 1 x Scaff-Clamp Hard Mount 2 x Lower-Sled Weights & 4 Screws 1 x Red 1/4” T-Hex Tool 1 x 1ft Arm Post 2 x Long Camera Mounting Plates 1 x Black 12V-24V Step-up Power Converter 1 x Slanted F-Bracket 2 x Arm Rain-Covers TACKLE BOX – CAMERA SCREWS 4 x (3/8) Camera Screws 4 x (1/4) Camera Screws 4 x (3/8) - (1/4) Thread Adapters 4 x Low Mode Gimbal Screws Case 4 - BATTERY. 4 x Dionic (160) Lithium-ion Batteries 1 x Anton-Bauer Quad Charger (#10987) 1 x Quad Charger Power Cable Case 5 - STAND 1 x Steadicam Sled Stand Upon inquiry we can supply a complete case weights and inventory of all parts and accessories as well as additional detailed photos of all parts as requested. Our Purchase price is (USD) $10,500.00. We are happy to ship world wide at purchasers expense. These costs will be worked out depending on buyers location. All listings are sold as is, where is. Happy to answer any questions and provide any more detailed information or photos This listing is also listed on Ebay https://www.ebay.com/itm/Steadicam-Masters-Series-Complete-Rig/292605497791?hash=item4420a591bf:g:HNgAAOSwWfdbJGRT

I am looking for vest Master series Leather

selling my plate - $300 plus shipping

325 euros Lilliput TM1018 S 10" monitor 3G-SDI & HDMI inputs & outputs hard case flip screen Gimbal bracket Velcro Sunshade Mini XLR to XLR Battery plates included for Sony... capacitive touchscreen including peaking, focus assist, waveform analysis The Lilliput TM-1018/S is a 10.1 inch 3-G SDI and HDMI field monitor featuring a capacitive touchscreen function for the features menu Monitor Specification Screen Size (diagonal) 10.1 inch Aspect Ratio 16:9 Maximum Resolution up to 1920 x 1080 Viewing Angle (degrees) 170/170 Brightness Ratio (cd/m2) 350 Contrast Ratio 800:1 Backlight LED Video Inputs 1 x 3G-SDI (BNC), 1 x HDMI, 1 x VGA, 1 x Composite (RCA) Video Outputs 1 x 3G-SDI (BNC), 1 x HDMI, 1 x Composite (RCA) Audio Outputs 3.5mm Jack output, 1 x Built in speaker (<1W) Touchscreen Technology Multitouch capacitive touchscreen allows for control of internal monitor settings Input Power 12V DC Operating Temperature -20 - 60 degrees Contents Of Box Product 1 x TM1018/S monitor Connection Cables 1 x Mini HDMI to HDMI cable Power Adaptor 12V UK, EU, AUS, or U.S upon request Mounts and stands Shoe mount adaptor Additional accessories Sunshade, battery plates Dimensions Height (mm) 170 Width (mm) 250 Depth (mm) 29.6 Weight (g) 630 Send from Belgium

ASAP. Let me know if anyone has one out there.

I'm interesting purchasing a Steadicam Sled, Aero or Zephyr.

Selling a 3A arm with Gold Springs, Comes with bag and a 6-inch post. The arm is in great working condition, with the normal dings and scratches from it being used. For those who need some reassurance, I am willing to send the arm to Robert Luna in CA for an inspection, at my expense. If it all checks out the buyer would have to pay for shipping from there to its new home. I will also ask if he would replace the rubber stoppers that are missing from the middle of the arm, also at my expense. Asking for $4700 buyer pays for shipping. Thank you.

Selling my first and much beloved PRO - MKV hybrid sled. The best of both worlds here, this rig treated me well for a couple of years. Just recently got a new sled so looking to offload this one with some various AKS. It'll make a newcomer very happy with all accessories needed to start besides the arm, vest and monitor. Ready to fly. Gimbal is also VOLT ready. The Sled - MK-V 1.5" Carbon Fiber Two Stage Telescoping Post w/ V-3+ Electronics (Upgraded Post Cable) and 3 V-Mount Battery Plates - GPIPro Gimbal (S/N 294) - GPIPro DB3 (S/N 065) - XCS Dual Rod Telescoping Bracket w Cam-Jam Yoke (just need CG mount for your monitor, around 50 bucks) Cables - MK-V to Arri 24v Cable - MK-V to 4pin XLR Cable (use with AB Plate for universal camera power) - Various BNC Cables Brackets - Jerry Hill GAD 2 Docking Bracket w/ docking ring (BRAND NEW! Used on one shoot) - PRO Docking Bracket - Various Steadicam Camera Plates Cases - Sled Case w/ Monitor Spot - AKS Case Cart - Magliner Cart w/ Steadicam System (Mast, Pin, Cushion) Various AKS/Power - Matthews Hollywood Beefy Baby Stand - 3 IDX Flight Safe 90wh Batteries with Dual Charger - All Tools for the Gimbal, Sled and DB3 25k+ worth of gear. Make me an offer. Looking to sell as much of the full package as possible. NYC Local. Buyer pays for shipping. Will ship worldwide. Email me directly at rtoussieng@gmail.com for offers/questions. Thank you all!

Hello All Selling my two Black Canisters. Less than a year old and honestly never used on set. Tested once at home with dummy camera. Since then only flew Greys in my Atlas. Now Upgraded to Titan and would like two Blues. So selling these two for $3000 Or would trade for two Blues. Thanks Will.lyte@gmail.com

Hello All Selling my Klassen Flex Back Mounted Vest. Purchased new January 2017, In great condition. $3600 I'm 5'10'' Waist 30-32 Inches Fits my frame well. Measurements: TOP: 13 1/4" BOTTOM: 14 3/4" F/B: 10 1/4" BACK: 19 1/2" Would trade for GPI PRO Vest, as I now have two of these back mounted vests so no need for both. Based in LA and more than happy for you to test . Will.lyte@gmail.com

Hi All, selling a Walter Klassen Flex back mount. I bought it in a full steadicam package 2 years ago. selling because it's to big for me. I try to use it few times but it doesn't fit me so I decided to Keep it a while but I never used again and I didn't grow up. So here is brand new: Flex Vest S/N: 042 : Top = 15 ¼” Bottom = 16 ½” Front/Back = 12 ½” For a man 5’10” and 210lbs Located in Barcelona. Asking 3.000€ OBO. Buyer pays Shipping, fees & VAT if needed. Thank you all interested can mail aswell direct to ppaureig@gmail.com

I am selling my trusted 3Arm, its been Cleaned and serviced by Robert Luna recently. its in fantastic working condition and it includes 6inc post . Asking $4900 plus shipping (Based in Los Angeles). Please feel free to Email or call with any questions Wael Shukha Shukhawael@gmail.com 323 395-9020

RED Edition ActionCam for sale with all original parts. Just serviced and cleaned. Great condition. - Zero-g Arm - RED Edition Sled - Back Mounted 50 lb Vest - Dovetail Plate - RED ONE power cable - Includes wheeled Explorer case for arm & hardware (no case for the vest) Looking for $9500 OBO Higher Rez Pics: https://www.dropbox.com/s/sov9u70sjexuqlj/IMG_2620.jpg?dl=0 https://www.dropbox.com/s/z6pb7encpteefb2/IMG_2627.jpg?dl=0 https://www.dropbox.com/s/71hkm2mn48ln3o5/IMG_2590.jpg?dl=0 https://www.dropbox.com/s/olivd89vpd0au7s/IMG_2591.jpg?dl=0 https://www.dropbox.com/s/dbqzzlnih40xeyc/IMG_2597.jpg?dl=0

For sale – Steadicam model EFP stock standard def unit. Vest, sled, arm with padded case, dock, low mode cage, zoom handle, tools, cables & 2 encore hard cases Selling complete package only – don’t want to separate / getting out of it completely Asking $11,000. for complete package / shipping & insurance extra prefer not to ship international Available for inspection or pick up in South Bend, IN Contact PentaVision (574) 272-8365 ask for Bob or email bob@pentavision.net

***[selling for a friend]*** Steadicam Aero 30 with custom Peli case 1630 and C-Stand. I’m selling my Steadicam Aero 30 that I’ve owned and used for the last year, it comes with everything needed, in a pelican case with professionally designed and cut foam. Everything packs up into the case for easy transport! Included: - Steadicam Aero Sled (V-Lock battery plate) - Steadicam A30 Arm - Steadicam Zephyr Vest - Steadi-stand (C-Stand) - Aero docking bracket + All cables that came with the rig Everything is in very good condition, there are very slight signs of use on the sled, but this rig has been very well cared for and is in near new condition! Bought new for: £6200 Asking price: £5500 Rig is located in West London. Any questions: roberthayward2@gmail.com Phone: 07748653735

Steadicam Ultra Cine Complete Package FOR SALE Complete Ultra Series kit all you need package to get started, so great for someone looking for their first rig. Not had a lot of use in the time I have owned it but well looked after and arm was last serviced at Optical Support. I bought this kit in 2015 and before me it was rental gear owned by ProCam. Apparently last job it went out on was Kickass 2 or so I was told. The kit comes with lots of cables to power both Arri and Panavision film cameras, and also Arri Alexa. Older RED ONE power cable which could be updated to work with epic/dragon. CASES · Large Hard wheelie case for Sled + Monitor · Large Hard wheelie case (can fit vest + arm and more) · Smaller Hard Case for cables + various bits · Wheel case for Arm - Branded Browning 5015 but it is exact same as Peli 1710 (foam is fresh/uncut) SLED · Ultra Cine Sled (motorised top stage + wireless remote) · 4 section Carbon Fibre Composite Telescoping Post with range from 28” to 71” ( 71cm to 180 cm ) · Upgraded to HDSDI · 12/24v Battery Mount V-Mount · Tilt Head (+ or – 20 degrees from horizontal) · Frame line generator (only when in SD) MONITOR · 8" Ultrabright2 HD Composite Monitor · HDSDI to SD down convertor Black Magic Mini (works with all cameras red/alexa/sony etc) ARM + sleeve · Ultra Arm 20 – 50lbs · Tool free side to side adjustment · 3 x arm rods 3” + 6” + 12” Recently serviced by Optical Support VEST + bag · Ultra Vest · Titanium Socket Block IDX VLOCK BATTERIES · 6 x IDX HL9 Batts · 1 x 1550 Peli Case · 1 x Hawkwood Plate dtap/hirose (VL CA2) · 1 x 4way VL-4S Charger + kettle lead VIDEO CABLES (see pics) · Various Lengths of BNC – mostly skinny from a few inches to 6’ long POWER CABLES · 2 x Arri (1 is 12v and 1 is 24v) · 1 x 12v 4pin · 2 x PV · 1 x RED (red one) · 1 x unidentified · 1 x unidentified STANDS · Lightweight C-Stand · American Stand with 8” Pneumatic Wheels MISCELLANEOUS Sand Bag Long Dovetail Plate Short Dovetail Plate (low mode) Low Mode Slanted F-Bracket Arri Alexa Plate Sony VCT Plate Brass Weight plate Small lead dovetail lead weight 4 x Screw, 3/8-16 2 x Screw, ¼ -20 Tiffen Docking Bracket + bag Stabilizing Vectran Line 4x 15mm rods RAIN COVERS · Ultra Arm Protective Covers, Dual Section · Ultra Bottom Sled Cover & Battery Protective Covers VEHICLE HARD MOUNT + case · Mitchell/MOY base + removable keyway · Socket Block + damage to plastic tie nuts, but still works fine WINDKILLER + sleeve · Hardly used Sunbounce Pro Windkiller I will also include · Arri Medium size Bag · Various BNC pieces · Cable Pouches · Blue space blanket · Various allen keys + tbar tool · Steadicam Operator's Handbook · Ultra Series Manual + Brochure And finally my VHS practice camera (see pic mounted on sled) Works great with the brass weight plate and is similar to a full build amira in weight. Recorder works great so you can practice at home and watch back your shots. I have converted the power so it works with regular V-Lock batts and the camera also comes with a case. ASKING £16500.00 Thanks for looking, please contact me on here or direct to andrewbradley@live.com Thanks Andrew

Hi everyone, selling my back mount vest $3500, let me know if you have any questions 5.6 ft, 165 lb, waist 34

Hi Folks, Up FOR SALE is a complete Steadicam Master Series Package, Inc: 1 - Master Series Sled with MK-V bottom stage rebuild, HD Line through the sled and 12v/24v Power, Transvideo HD6 monitor 2 - Master Series Arm - Recently Reconditioned by Robert Luna in the USA 3 - Master Series Vest 4 - HP Video HD Transmitter 5 - 10 x IDX HL9s V-lock Batteries w/ 4 way Charger 6 - Preston MDR1/HU1 w/ 2 DM1 Motors 7 - Hardmount w/ Moy plate 8 - Matthews Stand,Jerry Hill Dock, Low Mode Bracket, Rain Covers/Hood, Other accesories This was my first Steadicam and allowed me to learn and work as an operator on small Music Clips, Corporate Vids, Short films and move on to larger TVC's, Television Series and Feature films. I see this package as a great way for someone to start as an operator. Learning and working towards bigger and better jobs. For this reason I'd like to keep it all together, however I can separate the kit if it gets it moving. Below is a more detailed description of each part and individual prices as well as pics. I'll try to list everything in as much detail as possible. It's priced to sell, but I hope its clear that this equipment was well looked after and cared for. Please contact me with any questions. Cheers! Jonathan Tyler jt@jonathantyler.co +61417428880 Sydney Australia Total Package Price $18,800 USD (+GST if sold in Australia) Shipping at buyers expense 1 - Master Series Sled with MK-V bottom stage rebuild, HD Line through the sled and 12v/24v Power, Transvideo HD6 monitor - 3 vlock battery plate - 1 large camera plate - Inc's 2 BNC Cables - Flight case $4000 USD (+GST if sold in Australia) 2 - Master Series Arm - Recently Reconditioned by Robert Luna in the USA - long and short post - Carry bag $6000 USD (+GST if sold in Australia) 3 - Master Series Vest - Carry Bag - Spare Clips included $1500 USD (+GST if sold in Australia) 4 - HP Video HD Transmitter - Inc Dtap, Hirose, 4pin lemo and XLR Transmitter power - V-lock and AC power for Reciever - Various Spare antenna - Pelican 1620 Case $1000 USD (+GST if sold in Australia) 5 - 10 x IDX HL9s V-lock Batteries w/ 4 way Charger - Pelican 1550 case $4000 USD (+GST if sold in Australia) 6 - Preston MDR1/HU1 w/ 2 DM1 Motors - MicroForce, Wired Iris Control w/ cable - 4 motor cables, Arri Roll Cable, Red Roll Cable (few more old ones) - Various marking rings, brackets - Spare Arials - 3 Re-celled batteries w/ fast charger - 12/24v XLR power, 2 pin lemo power (from sled) - Flight case $2000 USD (+GST if sold in Australia) 7 - Hardmount w/ Moy plate - Soft case $300 USD (+GST if sold in Australia) 8 - Matthews Stand,Jerry Hill Dock, Low Mode Bracket, Rain Covers/Hood, Other accesories - No price on this stuff as most of it goes with the sled.Or I'll negotiate as offers arrive

Hi All, selling my Master Series Arm. Recently serviced by MKV in Manchester, previously by Optical support, London. Sale includes soft bag and master arm post. Few nicks and bumps as you may expect from an arm of this age, but in solid working order. Pics show covers off also for those who want a look at the springs and cable. Asking £4750k Ono plus VAT. The arm will be at 3 Mills Studios, London. for the next 3 weeks if anyone want to come and have a play or take a look. Cheers, Dan. Images@ https://www.icloud.com/sharedalbum/#B10J0DiRHXySgZ

Hi there, I´m selling my Masters Series Vest (Brown leather) It is one of the most comfortable vest I have used so far. Included in the package: Its own dedicated original hard case. PRICE: 1.500 € + Shipping Costs (Based in Barcelona (SPAIN)) Contact details: email: c.cabeceran@gmail.com web: www.carlescabeceran.com

EDIT: I'm also including a tally as well. Some wear and tear but nothing that affects its functionality. Standard 4-pin lemo connection, two tally lights, junction box and diode. FOR SALE: Selling the left-over parts of my MK-V Evolution sled. Sled includes center post, center post cable, bottom stage, battery rack. Gimbal, Top Stage and Monitor Bracket NOT included. The sled was originally built for PAG batteries but has since been modified with Gold Mount battery plates. The TB-6 is in excellent condition with minor wear-and-tear. I’m also including a rain cover for the TB-6 as well as a sun hood for it (the strap for the sun hood is NG, so it would need a little love). Included in the package is a Marrel digital horizon. Unfortunately the digital level doesn’t feed video so an additional BNC cable from the sled to the monitor in order to pass the video to the monitor. I’m also throwing in a Decimator I, a Blackmagic SDI to Analog Mini Converter, 8-pin monitor cable and an MK-V-to-XLR cable as well. Asking $3,500 for the whole package but am open to other offers. Also, I’m willing to break the package up. All reasonable offers accepted! Located in North Hollywood, CA Feel free to message me on here or email me at: aaron.gantt@gmail.com with all questions and offers. Cheers! Aaron

steadicam provid 2 plus with many upgrades and custom electronic. 12/24v $7.000 Hello every one, I am selling my first rig that I had, which I have conserved and updated constantly to respond to the demands of the current market. was my backup rig the last years and is a excellent option to newbies: the price is 7'000 USD + shipping from miami. 1.-Post in carbon provid 2 plus modified to 24V and HD. 2.-Monitor MARSHALL 3G-hdsdi. 3.-monitor bracket custom made, with carbon rods. 4.-original provid gimbal recently serviced and new bearings, the gimbal was upgraded with long handler from MK-V. 5.-power cables x 4: (Lemo 2 pin - XLR 4 pin x 2 / Lemo 2 pin - lemo 2 pin x 1/ D-tap - XLR 4 pin x 1) 6.- Hardware box with assorted screws and connectors. 7.- custom made hard mount. 8.- provid arm. modified to load actual cameras. (f55, alexa mini, red weapon) the arm is in regular condition and his boom range was limited to support more weight. 9.- Vest steadicam provid. 10.- tripod avenger aluminum 2 reeds. With case. 11.- pelican box 1650 12.- original thermodynamics box steadicam. 13.- BFD. analogous bartech. With two motor cables, D-tap cable. Bridge and rings. 14.- beillen battery 160W x 2 , and 96w x 1, + charger. 15.- Cover Harrison long version for steadicam. 16.- 5 video cables, various sizes. 17.- various tools in a steadicam pouch. more pics by request. andresgutidp@gmail.com +573122588932 andres gutierrez