Search the Community
Showing results for tags 'Transvideo'.
-
5” OLED Monitor / Recorder with Touch Screen and Arri Bus interface Package includes : 1 x StarliteHD5-ARRI 1 x Cable Lemo5 to Lemo6 with wiring for the EXT connector of the AMIRA/MINI* 1 x Magnetic snap-on screen cover 1 x Magnetic snap-on hood 1 x 3D swing Arm 1 x 8Gb SD card class10 1 x Pelican case Great working condition. Minor signs of use. No scratches on screen. $1100 Item is located in New York City. -
Selling my - transvideo HD Classic 8", 450Nit, Horizont indicator, Tally - Artemis ACT2 Bracket - Case for both ( in the last picture there is a 3M anti glare foil on the monitor . doesn't work and the monitor himself is better without. ) slightly signs of usage no scratches on the screen. the price is exclusive shipping or VAT. Prefer European shipping. 2.000€ PM if you are interested. for the moment I don't want to split. Monitor is available in the middle of July 2017
-
Good morning! I am in the process of purchasing a second Steadicam rig and I need to free up some cash so I have to sell a few items. Please email me at mike @ mikeheathcote.com if you are interested in any of the following, buyer pays for shipping: Foma Maxima MX 30 Gimbal (Before Arri Purchased it) – The New Arri Maxima is selling for $22,080.00 USD, I’m asking $10,500.00 USD OBO.I purchased this on the steadicamforum last year. It is in excellent condition and has Hardware version 1.5, Software 2.0 and Setup Software 0.2.0.3, . It has a 66lbs payload and comes with the following: joystick on the top of gimbal for Tilt and Pan control, 1.5 inch OLED Display with 5 slots to save settings, v mount power supply, Arri Mini Power Cable, Hard Case, Walter Klassen Slingshot Brackets, HP Pavillion Tablet with Maxima Software, Foma Top Handle mount to secure to a Crane. Maintenance and service was provided at Foma Systems in Germany. Walter Klassen SlingShot no vest– NEW $4,900.00 USD, I’m asking $3,000 USD OBO. This is in excellent condition. It does not come with a vest but you can easily purchase a universal harness if you don’t have a vest. It will work with any existing Walter Klassen back mount and just screws into the back where the carbon arm would mount. I’m including two sets of bungees for light, medium and heavy camera builds. It also comes with a MOVI top handle with the slingshot mounts on the side. Ready Rig GS with PRO Arms. NEW $2,598.00 USD, I’m asking $1,500 USD OBO. This is in excellent condition. Great for gimbal or handheld work. This Ready Rig has the PRO arms which are the newer carbon fiber arms that telescope and will hold up to 40lbs. Transvideo StarliteHD 5” Monitor/Recorder. NEW $1,600.00 USD, I’m asking $1,000.00 USD OBO. This is in excellent condition and I only used it a couple times. Comes with a hard case and PTAP power cable. Cinemilled PRO Ring with Handheld Mount. NEW $800.00 USD, I’m asking $300.00 USD OBO. Flowcine Gravity One for Handheld. NEW $5,000 USD, I’m asking $2,200 USD OBO. The Gravity one is $3,600 NEW plus the extra brackets I have are worth $1,400. Thanks!! Mike
-
MK-V Nexus (4)-Stage Deluxe 2" Post V2 Advanced Gimbal w/Standard Handle Evolution D-Box Evolution J-Box Standard Topstage V2“ Docking Station Dual Battery Mount for Anton Bauer Single Battery Mount for Anton Bauer Nexus base system Soft Case Monitor Transvideo 6.5" 16:9 Superbright LCD monitor Hard case Cable pack Arri 12V Cable 30" Lightweight 36" BNC 48" Monitor Cable (Pro Comp.) 2 x monitor power cable Batteries 3 x Anton Bauer Batteries PL-5680 4-way charger Arm Silverrig Silver Spring Arm (range 13-63 lbs) Speed Crank tensioning tool Arm post Arm Bag All equipment is in superb condition and never hired to others. It is a complete system. This Nexus has been a reliable & trustworthy rig. The electronics are rock-solid, the gimbal super-smooth. Ideally I would like to sell the package complete. A Steadicam Gold vest will be added for free on top as it has a crack, but still can be used. Equipment is located in Austria (AT), buyer pays shipping costs. Package asking price: 16'150 Euro Only serious offers! contact: paul.horatschek@icloud.com Click on the links for more photos!
-
... Before I buy a new rig this month.. I'll ask the experts: I am interested in purchasing an entire rig, Please send me your detailed rig and asking price in PM. If you have a Bartech or Preston that can be bundled, please include info. HD preferred. Frankinrig okay. Please NO glidecam, sachtler, MK-V Thanks. -Joel -
Selling MK-V Nexus with standard topstage V2 gimbal Anton Bauer dual rear and single base mounts 3 Anton Bauer batteries Steadirig Silver Spring arm with arm bag Gildecam Gold vest (has a break at the lower part - see photo) Transvideo 6.5" rainbow super bright LCD monitor Hocus Focus Receiver rod Mount 15mm Rx 15/19 / HOFO1 rem.focus System Redrock micro support baseplate 18"steel Iris rod kit 15mm swing arm assembly micro handle assembly complete package: 15'000 Euro excl. shipping from Austria I'd prefer to sell the whole package but am also willing to sale parts of it seperately Nexus: 9'000 Euro arm: 6'000 Euro hocus focus: 400 Euro Redrock: 1000 Euro prices are negotiable please contact me for more information: jackyscherpf@yahoo.com -
Backup equipment package for sale : the list of the equipment : - 1 Pro 2 sled + accessories (HD upgraded) - 1 XCS Gimble (perfectly centered) - 1 Luna arm + accessories (13-63lbs / 5.9-28.6kg) ( http://www.steadyrig.com/prod_Arms.html ) - 1 Steadicam Ultra2 vest + bag - 2 Tansvideo superbright cinemonitor III monitors (brightness : 1000 nits) - monitor support arm XCS - 1 electonic level bubble Marell - 1 up converter SD/HD AJA - batteries + charger - Scorpio FIZ 3 motors with 2 remote + many power and camera cables - 1 Tx/Rx wireless video Titan (upgrading 10 channels) - many cables - J bracket - 3 jumper blocks - recorder mount - docking bracket - stand - flight cases Everything is in very good condition and was never in rental. All packed in two Peli Cases with handmade inlays and one bag. Price: € 28.000 + Tax (€ 2.000) + Shipping (will sell worldwide, but Europe is easier of course as this equipment is based in France - Paris). If it's possible, I don't want to sell this equipment separately. Please let me know if you need more informations and/or photos and/or details. here is my contact : hello@staedup.fr best regards N. Attached Images
-
Hi all Transvideo TX & RX kit comes with small pelican case 1 x TX,RX each unit 1 x AC to DC adaptor /w power cable 2 x Lemo 4p to hirose 6P power cable 2 x Antennas Works great! Email me at steadi7 at naver.com 650USD + buyer pays shipping ( ships in solar system )
-
Hi All, Up for sale is my old Transvideo Cinemonitor 3a Super Bright (1200 nits) and a Decimator 2. Both is good condition. The Cine 3a has some velcro and a little paint scratched off near the mounting hole on the left side, but the screen is in pristine condition, and everything works great. Good performance in sunlight, etc. Classic example of a solid monitor. Doesn't come with the mounting gear in the pics! Decimator 2 is also in good shape -- just has some of the markings rubbed off. Both come in a small Transvideo branded pelican. $550 obo! Buyer pays shipping. Thanks for looking. Let me know if you have questions! Beau
-
Hi all, I'm selling my backup monitor. It has served me well for many years and since I got a new one, I stopped using this one completely . It has cosmetic wear and tear, but it's in very good working condition. Great for someone looking to buy a quality monitor on a limited budget. 3G SD/HD SDI, HDMI, analog, YPrPb & RGB For a complete list of specs, please check the transvideo website. (It's the 2011 generation) It comes with Hood, screen protective cover and Pelican case. Asking for 1000$, buyer pays shipping. Email to: contact@christopherkechichian.com Attached Images
-
Bought it 290€ from Transvideo on Feb 2016. As I've switched to Cam-Jam yoke one week after (I know ;-) don't need it anymore. 190€ It's located in France. Buyers pays shipping VAT applies for france buyers Yoke for CineMonitorHD8 - multi rods Ø15-56mm + Ø5/8"-3" + Ø5/8"-3.5" For CineMonitorHD8 Attaches to the center of gravity of the monitor Uses constant torque rotating system The monitor position can be adjusted without any tool To mount on 15mm rods with 56mm spacing, or on 5/8" rods (16mm) with 3" or 3.5" spacing (76 or 89mm) Attaches direclty to some Steadicam, PRO and MK-V systems - See more at: http://www.transvideo.eu/store/Yoke-multi-rods-adapter-CineMonitorHD8#sthash.0P08K49q.dp A pic of the "multi-rod"
-
Selling old stuff but working and in fine conditions - 7" teletest OZL1702 with AB plate - Transvideo Pegasus Receiver, 2 small antenas and 2 power cables - Modulus 3000 transmiter, with antenna, 6db attenuator Cables: - Pro-Modulus Power/video - Arri 12v- Modulus - Arri - Modulus Power/video - Panavison - Modulus 24v RedByte Decimator with 2 Power cables Shark fin Antena (Ultra-ant, CH. 14-69) Buyer pays for shipping Open to offers
-
Transvideo yoke for HD6. I used this on a Tiffen Ultra with the 16mm rods but also accepts 15mm with 56mm spacing. Good condition, works perfectly. Cost over $300. From the Transvideo site: Yoke for CineMonitorHD6 - multi rods Ø15-56mm + Ø5/8"-3" + Ø5/8"-3.5" For CineMonitorHD6 Attaches to the center of gravity of the monitor Uses constant torque rotating system The monitor position can be adjusted without any tool To mount on 15mm rods with 56mm spacing, or on 5/8" rods (16mm) with 3" or 3.5" spacing (76 or 89mm) Attaches direclty to some Steadicam, PRO and MK-V systems $160 plus shipping or pick up in Los Angeles
-
I'm selling a transvideo 6" ClassicCine Monitor HD superbright. EUR1.800.- plus shipping to international (shipping within EU included) It' s in perfect condition. Thanks for looking! Marc
-
Hey everyone, So I'm looking to upgrade from my old 6" Transvideo monitor to the newer daylight viewable one but I'm lost with which size to choose. The price difference is negligible and the number of nits is quite enough in both so they're not a factor to consider. However I'm more interested in the pros and cons of each one in terms of weight (is the big one too heavy and might cause vibrations?), framing (is the smaller one easier to scan quickly?)(does the bigger size help see minor details in the frame?) etc. Thanks for all the feedback. Chris
-
Selling a Transvideo 6" CineMonitorHD SBL Classic. incl. Frame lines & Waveform Software Here is the complete package list: 1x CineMonitor HD6 SBL Classic (1000 nits brightness) 1x Pelican case with custom shaped foam 1x Microfiber cloth & protective bag 1x 3D Swing Arm (heavy duty) with clamp for slide 1x Deluxe Hood with extension 1x BNC cable 1x XLR to D-Tap cable Condition: Like New (no wear and tear at all) Price: $2700 USD obo. Location: Luxembourg (Europe) Can ship to anywhere in the world at buyer's expense. Accepts PayPal transactions.
-
I am selling a Steadicam Ultra 2 sled with the 8" Transvideo HD Monitor and 6 Steadicam Power Cubes. Cost me £37,000. Kit is in mint condition - looks brand new. Has had little use. Complete in original Steadicam boxes. Looking for £15,000. No VAT Pictures on request. Also have a Master Film Arm in fair condition. Works well. £2,500 Master Film Vest. Fair condition £1500 Genio Remote Focus System 2- Channel £1500
-
MK-V-V4 rig for sale, including: - MK-V-V4 HDDSI Sled: DBox + JBox + HDSDI Telescopic Centerpost + Pro guimbal + Battery Rack + original monitor arm - Walterflex vest - Long post. To super high mode or super low mode. - Monitor. Transvideo Rainbow HD SBL. With bubble level - GPT Pro Arm TITAN with 4x Blue canister and 4x Black canister - Cables: 1x 4 pix XLR to 8pin Lemo (monitor), 1x 8pin Lemo to 8 pin Lemo (ekstra), 2x 4pin XLR to 3 pin Lemo, 1x Link Powercable 4x pin Lemo til 4pin XLR, 1x Arri 24V - Golbalmediapro 4 pos charger - 2x GMP Li230S-HW Battery 2x GMP Li160DS Battery - Tools and spares - 2x Camera Plate for Sony broadcast - Betz Top Stage - Steadicam Stand American - Cases: 1x Pelican iM3075 for monitor,pro arm,charger and cables, 1x Pelican iM3200 for battery,Sled,Tools,Cabels, Accessories, 1x Tube case for the Steadicam Stand, 1x Soft bag of the Walterflex vest This a complete kit and it’s in very good conditions. We do worldwide shipping. Please feel free to call or email with any questions or offers. email: tjafri@jt-productions.com Phone: + 47 48140270 Price is 29500 euro. Shipment are not included. We are based in Oslo, Norway.
-
Hello everyone interested in buying complete rig. If possible: sled 2"(MK-V, XCS, Pro 1,5"), Betz tools top stage, Pro Arm, WK or Pro vest, Follow Focus kit, HD transmiter kit... Open to offers -
Special offer from Germany: 1 MK-V Evolution 2" with Quick-Lock stage and V3 HD D-Box 1 Steadicam Master-Arm IsoElastic (has been serviced in Sept. and got one new spring!) with bag 1 Sachtler ACT2 vest 1 Transvideo HD6 SBL monitor 1 Genio 2 channel wireless focus device complete 1 Docking bracket 1 Feedback-Stand 1 Battery-charger PAG / 4-channel 1 Batterie-charger PAG / 2-channel 4 PAG-batteries 95 Wh (two of them are unfortunately in poor condition) 1 StormCase for sled, monitor, batteries and small parts several accessories, connection cables and small parts Complete bundle for 23.000 € + tax + shipping Regards
- 2 replies
-
- 1
-
-
- MK-V
- Master-Arm
- (and 3 more)
-
Transvideo SBL Rainbow HD monitor for sale. Specs www.transvideo.eu/store/rainbowHD7-SBL Used on a series over the summer as a back up steadi monitor and as a onboard operating monitor. I no longer need it. Purchased in May 2015 Monitor has some signs of use but is in great condition. Comes with a - Case - SDI BNC Cable - Swing away arm - www.transvideo.eu/store/3DSwing-arm-heavy-duty-with-cfs - P-Tap to 4 pin xlr Cable - V-Mount Battery Plate - www.transvideo.eu/store/battery-back-for-cinemonitorHD8-and-RainbowHD $2100 USD plus Shipping. Item is currently in Dubai Email me for pics Thanks Steve camerasteve@gmail.com -
Transvideo SBL Rainbow HD monitor for sale. Specs www.transvideo.eu/store/rainbowHD7-SBL Used on a series over the summer as a back up steadi monitor and as a onboard operating monitor. I no longer need it. Purchased in May 2015 Monitor has some signs of use but is in great condition. Comes with a - Case - SDI BNC Cable - Swing away arm - www.transvideo.eu/store/3DSwing-arm-heavy-duty-with-cfs - P-Tap to 4 pin xlr Cable - V-Mount Battery Plate - www.transvideo.eu/store/battery-back-for-cinemonitorHD8-and-RainbowHD $2100 USD plus Shipping. Item is currently in Dubai Email me for pics Thanks Steve camerasteve@gmail.com
-
FOR SALE: Transvideo CineMonitor HD6 SBL Super Bright Monitor Model # 917TS0031 (blue knob) HD -- Super Bright 1000 nts Luminance Waveform Monitor Multi-format imput support Selectable Aspect Ratios Sunshade Cable to "PRO, MK-V" style Steadicam sled Rain Cover Pelican Case This has been my main monitor on my MK-V sled for about 5 years. It's the best out there in my opinion. I changed to a larger screen Transvideo as it became avaiable. These monitors are so reliable that having a spare isn't nesessary. So it's time to sell this. $ 3000.00 USD Free Shipping to Continental US
-
Looking for a Monitor bracket for Transvideo 6" for Artemis / without clamp. Thank you -
I just finished a prototype of a small weight plate for the Transvideo RainbowHD7 and RainbowHD7 SBL. I've been using the RainbowHD7 SBL for a little while now and love it particularly for a light running rig, but I've run into a few set ups where it helps to have just a little more weight out in front of the sled. So here is a plate to do simply that. This plate bolts directly to the back of the monitor using Transvideo's locating pins and a 1/4-20 screw. The pins hold it off of the monitor so the monitor still has air flow for cooling. It is centered vertically and horizontally on the monitor to keep the balance centered on a yoke. The bottom of the plate is even with the top of the 4-pin xlr connector, so if you are using a right angle plug it can still fit along the bottom of the monitor under the plate. It is machined out of brass for compact weight and weighs in at 1.25lbs. I'm posting this to see if there are any operators using one of these monitors who would be interested in one of these weight plates. I don't have pricing worked out yet, just seeing if there would be enough interest to look into setting up a short run of them. https://twitter.com/TRANSVIDEO_HD/status/500583861068517376/photo/1
