Search the Community
Showing results for tags 'arm'.
-
Complete Proline Steadycam Rig (RAVEN) up for sale, never used bought on 8-12-2013, i own a small rental house in northern india and bought this to supply something new to my clients here in india, but unfortunately i never even got a chance to shoot with it, as i am not a operator myself i had a hard time finding a feasible steadycam operator to work with me so its just not working out and i have decided to sell it. The Rig is in 10/10 condition and it can be shipped worldwide at the buyer’s cost. For more info go to proline website: http://www.steadicamproline.com PRODUCT DESCRIPTION Complete ProLine Steadycam Rig 1-Sled (red edition) 2-arm (T2000) 3-Vest 4-Deluxe Flight Case (for sled and arm) 5-iKan-vx7e 7’ monitor http://ikancorp.com/productdetail.php?id=313 6-Bartech Focus Device with M1 Motor 7- Teradek Bolt Pro Wireless HD Transmitter http://www.teradek.com/pages/bolt 8-4 Blueshape v-lock Batteries (190 HD) + One Charger http://www.blueshapeusa.com This equipment will be sold all together, specific components will not be sold individually, everything is almost new, never used, comes with all the cables and with complete accessory. For more information please email me at pawitterparmar@gmail.com. You can also give me a call at +91-987-861-7299. Asking Price: $ 20,000 USD ( Negotiable )
-
PRO Gen II Sled includes: Donkey Box II PRO Preston T bracket Gen II Upper J Box Center Post II VZ gimbal PRO GenII monitor PRO monitor arm and center post bracket Gen II Lower J Box PRO level sensor Gen II Battery Rack DCE Low Mode bracket DCE Arri dovetail plate PRO side to side dovetail plate PRO gimbal wrench PRO Center post wrench PRO Monitor shade 5/32 wrench Dock with balance stud ATA Travel Case PRO Vest in excellent condition 34" waist 3A Arm (Lunavised) with gold springs. Performs perfectly Serviced by Robert Luna a couple years ago and used as a back up arm. w/ padded bag Preston HU1, MDR1 6 focus rings 2 DM1 motors 1 Preston Fast charger 3 Preston batteries 1 PRO to Preston power cable PRO to MDR dovetail H bracket w/ Innerspace ATA case 9 Anton Bauer Hytron 50 batteries 1 Anton Bauer TWQ simultaneous quad charger 1 Decimator 2 SDI to Analog downconverter w/ p-tap and PRO power cable 1 Blackmagic SDI to Analog downconverter w/ p-tap power cable 1 Modulus 2000 video transmitter w/ PRO power cables and three antennas 1 Garfield vehicle mount with socket block 1 Modern steadicam stand w/ rocky mountain leg Assortment of PRO camera power cables BNC and video cables AKS ATA case Miscellaneous tools and brackets $32,000.00
-
Full rig for sale $13,000 USD (A/B batteries not included) Steadicam is located in Pittsburgh, PA - The Sled is a Baer-Bel 12 and 24 volt and color monitor - Arm is a Model 3 - Elite Vest - tripod and docking bracket If you want more specific pictures please email.
-
For Sale: Garrett Brown Steadicam rig
Simon Dodds posted a topic in Steadicam Marketplace - For Sale
Hi, I'm looking to sell a partly original, partly modified (possibly model 3) Staedicam. It's well used but fully working, all items can be seen in the pics attached - if you have any questions please ask. Ideally I'm looking to sell this as a job lot, the whole rig, and not split up items individually. This is for collection only, I live in London, UK. All reasonable offers welcome. Many thanks.
-
Steadicam arm for sale Baer-Bel Camtec BL II (with 4 heavy and 2 light springs) 5800,- € (7900,- $) + shipping (located in Berlin, Germany) good condition, 5y old, checked by manufacturer with 3y warranty! Description from manufacturers website: The BL ll arm has been designed to allow the operator to interchange the spring configuration depending on the size of camera they are flying: The arm is initially set to support cameras ranging from 18lb-56lb in weight. Using the light weight springs provided, the arm can be readjusted to take cameras with a weight from 6lb-26lb. The arm has been designed to work with the connector blocks from the PRO, Master, EFP, Daniel Souve and Sachtler vests. The arm post rod measures 5/16” in diameter allowing it to be used with a variety of other sleds. E.g. 3A, EFP, PRO, MK-V, Sachtler and Chrosziel. Please mail for pics and more information. Like This Quote MultiQuote Report
-
Full rig for sale $15,000 USD (A/B batteries not included) Steadicam is located in Pittsburgh, PA - The Sled is a Baer-Bel 12 and 24 volt and color monitor - Arm is a Model 3 - Elite Vest - tripod and docking bracket Here are more pictures, and if you want more specific pictures please email. https://www.facebook...peters.14268769 Tom steadicam1138@hotmail.com
-
Full rig for sale $15,000 USD (A/B batteries not included) Steadicam is located in Pittsburgh, PA - The Sled is a Baer-Bel 12 and 24 volt and color monitor - Arm is a Model 3 - Elite Vest - tripod and docking bracket Here are more pictures, and if you want more specific pictures please email. https://www.facebook.com/tom.peters.14268769 Tom steadicam1138@hotmail.com
-
IIIA Arm + Arm Posts + Low Mode Bracket Hi All! I am selling my IIIA arm including 2 arm posts and low-mode bracket. This arm is in great mechanical working order. I will also include a soft arm bag with the sale (not pictured). Asking $5,500 O.B.O. + Shipping for the arm and AKS I am located in Los Angeles for local pickup Feel free to contact me with any question valko.steadi@gmail.com **PICTURES** -TV -
Looking for a complete used Steadycam Archer kit! Would be great to find someone! Please post or Email: burz@n.zgs.de Best Andreas -
Hello All, Steadyrig is selling off one of our one-off OB watersport Arms, it is an upgraded Cinema Products Arm. We modified this Arm to have the capacity to lift larger weight range from 15-53lbs -Able to fly an ARRI Alexa (with no accessories attached), The trunnions have been treated with a Rust Proof finish, a Steadyrig D-Link with stainless steel sealed bearings that receive the arm post and a Break that provides variable resistance, and MKII Steadyrig spring covers - Weatherproofed. This arm is pretty much "Bullet Proof" used on Australian Iron Man series and Pro Surfing Competitions, on the rear of a Jet Ski. (See: ) Refurbished at STEADYRIG Melbourne, Australia. If you have any interest in this sale please visit the Ebay link below or contact us directly at admin@steadyrig.com http://www.ebay.com/itm/190916402644?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649#ht_983wt_958 Kind Regards, Hugo
-
Steadicam Flyer For Sale Flyer Sled 2 V-Mount Battery Rack (12 volt only) Flyer SD monitor Custom HDMI cable through the post if you wanted to mount your own HD monitor. Or if you prefer I could remove this before the sale. Flyer Arm w/arm sleeve Low Mode Brackets Flyer Vest IDX 2 Bank Sequential Charger 2 IDX Endura 80S Batteries SteadiStand and docking bracket Flight Case w/custom foam that fits everything. contact me at hello@adammillerdp.com
-
For sale is my Recently overhauled Master/Ultra Arm. Is in great shape, I've rarely seen a Master arm as this one on the market. It has been overhauled by Brian Busby @ Mitchell Engineering, I've spent 1200£ on it. All invoices available. Included in the sale is a padded arm bag and one arm post (Master to Pro). Selling ONLY because I upgraded to a Pro arm. 5300£ or equivalent. Can ship worldwide. Shipping and bank transfer cost at buyer expenses. PM or email if interested.
-
hey yall I have been speaking with jack at pro about the cinelive system and am enthusiastic about the rig and atlas arm. unfortunately there was not a vest available at the factory to try out the atlas arm. if anyone with an atlas arm (and rig) and has some time this week, i would love to give it a feel. i am happy to bring you a six-pack of your favorite beverage, from cream soda to chimay, for your time and thoughts. i can bring my weight cage, i dont need a camera, this is really about feeling the pro experience. feel free to send me a message on the forum or email me. id greatly apprecite it! have a rad one! brett. 12@brettmayfield.com
-
Hello All. I need to buy more stuff and need to sell my great backup arm to do so. I just had it fully serviced by Robert Luna two weeks ago. So, it is in top notch condition. Mr. Luna completely stripped it down, retuned it, replaced damaged parts, including some of the arm housings, repainted the markers, and more. This includes the arm, the socket block, and an arm post. He tuned it to 30-63 lb weight range. This service alone was over $1400. I am asking $6500 USD and would prefer to ship in the states. I would consider overseas shipping, but for a higher price to deal with the hassle.
-
I am selling my Steadicam Master Series Arm. It has just come back from Tiffen having had a complete overhaul including all new bearings, new elbows, and everything else cleaned and checked thoroughly. The arm is in excellent condition and will come with the following: -Master Series Arm (68 pound lifting capacity) -Tiffen Arm Post (short) -Tiffen Arm Post (long - 12in) -PRO/EFP Arm Post -Soft Padded Arm Bag PRICE - $9,000 The arm is located in Los Angeles and can be shipped anywhere in the U.S. for free or anywhere internationally at the buyer's expense. If you have any questions please don't hesitate to contact me. -Andrew 310-993-0039 aansnick@gmail.com -
Pro II SD Package for sale: Pro II SD Sled Pro II Donkey Box New Style Telescoping Centerpost Pro VZ Gymbal Pro II Battery Hanger w/ video mount Pro monitor arm + extension XCS TB6 Greenscreen Duoframe Monitor XCS Digital Level Plus (3) Power Blocks (10) Dionic 90 Anton Bauer Batteries (2) Anton Bauer Dual Chargers (1 w/DDM) w/ cables and hard case (2) sets of Pro to Camera Power Cables for most major camera systems including RED Camera Plates 7", 9" Hard Case Decimator 2 Downconverter w/ Pro Cable Pro Superpost SD w/ soft tube case Pro Titan Arm (4) Blue Canisters (4) Black Canisters Canister Soft Case Arm Soft Bag Arm Tools Pro Vest Fitted for Medium to XL Operator ( 2 Waistbands) Modular 51 Soft Case Preston FIZ H2 Complete w/ 3 motors MDR 2 HU2 Digital Microforce Short and Long Zoom cables (2) DM1X Motors and Hill brackets (1) DM2 Motor for Iris and Hill brackets (1) Preston Battery ( 2nd battery is bad) Preston Battery Charger Omni Shot adapter w/ Large and Small Batteries and charger (2) Sets of Run Cables for most major camera systems: PV, Arri, Wired Remote Iris Control w/ cables (operated by plugging into HU2) (4) Motor Cables Pro to MDR Power cables Pro MDR mounting bracket (3) 5/8 Hill motor arms (3) 15" Hill motor arms (3) 19" Hill motor arms (1) PAM Panavision FF to Preston Bracket (10) Marking Rings Pelican 1600 Case American 3 Riser Stand (black) w/ hard casters & brakes Hill Docking/Balancing Bracket with Gorelock 1.5" Gorelock Docking Bracket for cart/aux (2) Gorelock Clamps/Rings Hill Garfield Vehicle Mount w/ socket block Antlers (no telescope) w/ Riser from Brent Fagan MK-V DSLR Cage for steadicam w/ Anton Bauer Battery Mount Raincovers: Camera Essential PVLW, Arri SR III Pro II Sled Raincover by Camera Essential Pro Arm Rain and Dust Cover Harrison Standby Cover w/ stuff sack Practice weight 23 lbs aluminum block w/ camera plate holes threaded into bottom and DSLR quick release on top Pelican case (2) Modulus 3000 SD transmitters w/ cables to Pro (2) Sharkfin Antennas Sony SD Video Tuner/Receiver w/ AC/DC cables Transvideo Hermes Receiver w/ cables and antenna Hard case Misc Accessories Would prefer to sell as a complete package. May consider piecing it out. Total = $65,000 USD Located in Los Angeles. Price does not include shipping. Contact: nct1965@gmail.com -
Steadicam arm for sale Baer-Bel Camtec BL II (with 4 heavy and 2 light springs) 7500,- € (9650,- $) + shipping (located in Berlin, Germany) good condition, 5y old, checked by manufacturer with 3y warranty! Description from manufacturers website: The BL ll arm has been designed to allow the operator to interchange the spring configuration depending on the size of camera they are flying: The arm is initially set to support cameras ranging from 18lb-56lb in weight. Using the light weight springs provided, the arm can be readjusted to take cameras with a weight from 6lb-26lb. The arm has been designed to work with the connector blocks from the PRO, Master, EFP, Daniel Souve and Sachtler vests. The arm post rod measures 5/16” in diameter allowing it to be used with a variety of other sleds. E.g. 3A, EFP, PRO, MK-V, Sachtler and Chrosziel. Please mail for pics and more information.
-
Hello Everyone, We currently have two long term rental arms available at $4.50 per day. An additional one or two more arms may become available in the coming weeks. Regards, Hugo. admin@steadyrig.com www.steadyrig.com
-
I sell used female socket block which is used on vest bridge assembly for connecting vest & arm. Price: 250$ USD teva.vasseur@gmail.com www.disquetteprod.com
-
the folks over at PRO have been busy for the last 18 months and this is one of the results. If you are considering buying a rig or upgrading you have to give this package SERIOUS consideration Pro Suit Atlas Arm with 2 grey and 2 black cartridges Complete Sled with the Gen 4 battery base, DB2 and preston mount, Gimbal with quick release clamp. $34,200 for the package! (monitor and batteries not included) This is a FULLY modular system, it grows with you, you don't need to go out and buy a new sled when you upgrade like other "Systems" When you need more arm capacity you buy the Titan chassis and two blues and you are good to go. If you would like to see this package come to Cinegear (5/31-6/1) Booth 114 on Brooklyn street It's a nice big booth with plenty of room for you to fly the new package. Pro will also be at the stabilizergear expo (6/2)
-
Hi fellow operators I am looking for a new rig to invest in and I have looked into a few for sale. And now on the marketplace there is not so much for sale so if someone have anything for sale or have thoughts of selling please tell me, I have no experience of pro or mk-v and I'm a bit curious in those I work mainly with film so it need to be able to take heavy cameras If its a complete package with vest and arm or just sled it doesn't matter Cheers
-
Looking to purchase a Steadicam flyer arm or perhaps the arm and vest combo if you don't want to sell it separately. My budget for this is $1500. Thanks
-
Fellow ops, I'm selling my back up arm. It's a Glidecam Gold Series Arm. It has been modified by Glidecam with stronger springs. It easely lifts 65 lbs. The arm has it's fair wear and tear but works just fine. Selling it for USD 4800.- plus shipping. The arm is located in Switzerland. Thanks. Lukas
-
So, I recently got a Pilot, and as I'm getting used to operating it, I finally figured out why it was putting a lot of strain on my lower back muscles. I have a somewhat protruding but muscular upper abdomen combined with a sunken chest, which puts the vest center bar and arm mount at a backwards angle when I stand with the rig weight balanced over my center of gravity. Standing so the lower pivot point is perpendicular to the ground and the arm swings freely involves leaning forward, which involves a bit of back strain. So, is there a kit or something available to make the fore/aft arm mount angle more adjustable than the small amount afforded in the thumbscrews in the mount itself? I'd like to figure out how to use this thing for longer periods without worrying about muscle exhaustion.
-
Looking for a full rig (arm, vest and sled) for 10-12k, large enough to fly an Alexa, for example. Thanks!
