Search the Community
Showing results for tags 'artemis'.
-
I’m selling my sled Artemis 1 Cine Broadcast 1.8in V-Mount after upgrading my rig to Trinity2/Artemis 2. The Artemis 1 was originally purchased from ARRI on October 2020 and it’s located in Dubai UAE. The set includes: K2.0010314 1x artemis Cine Broadcast 1.8in, V-Mount K2.0010319 1x artemis Docking Bracket, 1.8in K2.0010443 1x artemis Camera Dovetail Plate, 8in K2.0010436 1x Hex Key 2mm K2.0010437 1x Hex Key 1.5mm K2.0010471 1x Cam Power, Cine, 24V, Fischer 2pin original cable I’m also including this extra cables, accessories and case for the Artemis 1: Cam Power, Cine, 24V, Fischer 2pin spare cable Pelican case 1615 for TRINITY & artemis rigs Adicam Quick Release Plate Cable FFA 0S to D-tap F 35cm 2X Cable FFA 0S to D-tap splitter F 50&35cm Cable FFA 0S to 12V external power 25CM 2X Cable FFA 0S to D-tap F 60cm 2X Lemo 0S 303 to Dtap F 60cm ARRI CSS Post Tool for Artemis and Trinity Asking for 14000 euro or best offer. Shipping is on the buyer. I accept EURO, AED or USD. The steadicam has some cosmetic scratches in the gimbal but is working in perfect conditions. You can contact me on my email alex@alexsteadi.com or send me a message.
-
This ARTEMIS (gen 1) was co-branded with Sachtler before Arri purchased the line. * 1.5" post should be Volt compatible. It's a great rig. ARTEMIS (gen 1) CINE HD PRO sled 1.5" post 12/24v GPI PRO vest - I'm 5'10" 180 lbs. G50X arm with padded carry bag and rain covers Transvideo Cinemonitor HD-6 with rain cover 1 Sachtler Docking bracket 8.25" inch dovetail with attachable bracket and 15mm rods Anton Bauer TM4 quad charger 3x Dionic HC gold mount batteries 2x Dionic Interactive gold mount batteries (2x) Pelican 1650 rolling cases - one with custmized foam for sled and AKS, the other is padded for accessories 1 Matthews 2 stage baby junior rolling stand CABLES 4 pin Lemo > Alexa (classic), Arri Film Cameras 4 pin Lemo > Red DMSC2 (2x) 2 pin Lemo > 4 pin XLR (Monitor) 3 pin Lemo > 4 pin XLR (Camera) 4 pin Lemo > 4 pin XLR (Camera) 3 pin Lemo > 2.5mm DC 4 pin Lemo > 2.5mm DC (4x) BNC $22,500.00 Located in NYC. Buyer pays shipping and fees. Thanks and good luck!
-
For sale in perfect condition arri artemis vest(which comes with a trinity), used fiew moths, comes with an extra back pads and B&W 6800 case.this vest will fir to everyone, it's very universal. For sale as I am switching to back mount. Ready to swap for a X spine + x bone ,and pay extra
-
Hi. I own 3 vests vests for sale Artemis 2 in very good condition 3800euro Smartsystems vest lite BRAND NEW 2000 euro Walter klassen vest, fair condition, fully working, regular or goofy 186cm 100kg fits fine 3000 euro I want to purchase X spine + x bone, i would like to trade one of my vest (or two vests) + i pay extra pictures in a comments
-
Hi Folks, Hope you're all well. I have a brand new Trinity 2/Artemis 2 for sale. I purchased this for a movie that ended up getting shelved before the strike. It has never been on set. The kit has pelican cases for the head and the wheels but not the Sled. I was planning on doing a bigger custom case that I never finalized. It has all three axis wheels for when and if they ever come out with the pan motor for the Trinity as well as the wireless transiever to operate everything wirelessly. Everything is in great condition and works great and has only ever been built in a rental house. Pricing it for a quick sale at 80K, purchased everything for 90K from previous owner that basically transfered ownership from Arri to me that had purchased it for $95,745.99. Extra accessories from a normal Trinity package circled in red below. Located in Los Angeles. The items missing from the package are the CSS Long Steel QL plate 315 & 450mm and the 7inch and 5inch monitor mounts. I never used these as I rigged them differently. Please contact me for further information. All the best, Roham
-
ARRI ARTEMIS 2 with 1.8" Shorty Post
Yoerys Fraga posted a topic in Steadicam Marketplace - For Sale
I'm selling my new Artemis 2, I just changed my mind. It comes with 3 gold mount battery mounts 2 dove tail plates, long and short Amira power cable Regular 12v cam power Extra rods Extra sled main power cable Clamp bridge 19mm Artemis docking bracket Insert for the hard case $24,000 + shipping If interested, please send me a message at steadirig@gmail.com -
Hey If someone are interested in this bracket I have some to sell. It fits to all Arri SAM dovetail plates, works in Trinity and Trinity 2. You can use it to add weight behind or below the camera in long setups to help the balance and attach also the free roll cable holder. It's made form powder coated aluminium You can see more pics an a video here, https://www.instagram.com/p/Cq479neqChh/?igshid=MzRlODBiNWFlZA==.
-
Hello everyone I‘m selling my backup monitor with its artemis monitor bracket. The monitor is a Transvideo 6“ Cinemonitor x-sbl (red knob). The bracket is an ARRI Artemis monitor bracket with a postclamp. Both items are used and show corresponding signs of usage, as shown in the pictures. Both items are in perfect working condition. This monitor package is adaptable to most rigs and I prefer to sell the items together, if possible. Please note, the clamp adaptor ring to use the postclamp with a 1.5" posts will not be included (small plastic ring adapters). The monitor comes along with a small Peli case from Transvideo. Buyer pays any occuring shipping and money transfer fees. PRICE: 3000 € (plus VAT/MWSt. if you're based in Germany) Shoot me a message for further questions Cheers
- 2 replies
-
- x-sbl
- transvideo
-
(and 3 more)
Tagged with:
-
Hi I'm selling my Artemis monitor bracket, which I was using on my Artemis Cine Broadcast Rig before. I've sold the sled two years ago and kept the monitor bracket as a backup, but figured now there is no point in keeping it. I was using the bracket with a Transvideo 6 inch x-sbl monitor, so you will be able to use it only with that monitor or monitors built identical. Please note, that the 1.5 inch post clamp is NOT included! The bracket has some scratches and signs of usage (see pics attached), but is functioning without flawlessly. The bracket is located in Berlin/Germany, so a sale within the EU would be preferred. Buyer pays shipping and money transfer fees. Price I'm asking is 1000 € EUR Cheers
-
Hey guys, I have some things for sale. ARRI artemis Post Extension ø1.8 in, 3B , 16pin length 8.5 in (K2.0041976) NEW, never used €850.00 OBO Ted Churchill Monitor Bracket - including 1.5ø adapter Like NEW condition, used once €800.00 OBO TERADEK RT 1 x 1 channel hand unit -CTRL.1 (including lens mapping and cable for small HD Cine7, Indie) - including monitor mount - including batteries and charger 1 x 3 channel receiver - MDR. X - including power cable 3 x Motor X - including cable 1 x Zommrocker X -including cable The Wireless Focus has wear and tear commensurate with age. It is currently being checked by Teradek prior to sale. It will be available from mid-August. The whole set 6000.00€ OBO Feel free and Please send me your price suggestions. All prices without VAT. The buyer receives an invoice with VAT. Sell preferably to buyers from the EU, not the continent but the economic area. Sorry UK. pictures will follow
- 4 replies
-
- arri
- postextension
-
(and 10 more)
Tagged with:
-
For Sale - $24,500 - ARTEMIS 1.8'' CINE HD PRO SLED + G-50X ARM + ExoVest Hello Fellow Ops. I have enjoyed being part of this community since Garrett and Jerry made me walk the in Exton, PA, in 2008. My rig was purchased in 2015. It is in very good condition. My sled was inspected and checked at ARRI, NY, in March 2019. I have operated with this only 6 times in the past 2 years. The equipment is currently located in Amsterdam, Netherlands. A sale within the EU and the US is my first preference. No monitor is included in this sale. Buyer pays shipping and bank transfer fees (if necessary). Asking Price for Full Package including Accessories : $24,500 (Excludes VAT in EU) Thanks All, Rich Contact: Richard@fourbentcorners.com • ARTEMIS 1.8’’ Cine Broadcast (V-Mount Battery Mounts, 12V / 24V ) • G-50X ARM • EXO VEST INCLUDED ADDITIONAL ACCESSORIES : • G Zoom + Fujinon & Canon Focus Adapter (Excellent Condition) • Peter Abraham Zalex Longplate • ACT 2 docking bracket • 8" dovetail plate • ExoVest Replacement Parts • Telescopic Monitor bracket • Case (Robust build, Originally $800) • Custom milled G50x Pin to Mount Pro sled gimbal INCLUDED CABLES : 1 12V XLR HiCap cam power cable. 4pin Lemo 1S to 4pin XLR 1 12V XLR power cable. 3 pin Lemo OS - 4pin XLR 2 Cam Power / 24V ARRI 2pin Fischer / for ARRI Alexa 2 Preston MDR Power 12v cables 6" and 2' 1 RED EPIC Cam Power Cable / HiCap / 4pin Lemo 1S - 4pin Lemo 1 Red Cam Power Cable / HiCap /4pin Lemo 1S -> 6pin Lemo B2 1 Cam Power cable / 24V Panavision 3pin Lemo S / for Panavision
-
email: dani.dagher@hotmail.com Sled Artemis EFP 1.5” 10000$ OBO new ACT 2 gimbal (2250€) gold mount custom extended docking bracket for dynamic balance HD SDI PRO updated by Arri (1170€) Transvideo HD6 monitor with digital horizon telescopic monitor bracket with post clamp cables: (dtap to xlr - 2 pin to xlr - cam power lemo to alexa mini - cam power lemo to xlr - acc to bnc) 2 donut weights Pelican 1615 (280$) + custom hard foam (500$) + lid organiser (125$)
- 1 reply
-
- for sale
- transvideo
-
(and 3 more)
Tagged with:
-
I am selling my ARRI TRINITY // Artemis Package. Both the TRINITY and the Artemis are fully serviced. The Package doesn’t include a monitor. The TRINITY includes all the necessary cables to power an ARRI Starlite or a SmallHD 503 (2pin) monitor. Package includes: K2.0010282 TRINITY upgrade bundle 3B, 2.5in K2.0010287 TRINITY Joystick Monitor Mount K2.0010569 Gimbal Handel Extender for 1.8in Gimbal K2.0010288 TRINITY Battery Mount, Gold Mount 4x K2.0010319 artemis Docking Bracket, 1.8in K2.0010290 TRINITY PWR, Lemo 1B 4pin to 1B 4pin K2.0024100 TRINITY PWR, Lemo 1S 3pin to 1S 3pin (only for TRINITY upgraded to 24V) K2.0014805 TRINITY Joystick Main cable (single BNC-SMB cable) Custom TRINITY Joystick Main cable (two BNC-SMB cables VID. OUT & LOOP OUT) K2.0014804 TRINITY BNC cable for Joystick Main cable – spare BNC-SMC cable for the TRINITY Main cable (K2.0014805), backup K2.0014801 Joystick Pwr. cable for ARRI Starlite K2.0014801 Joystick Pwr. cable for ARRI Starlite, backup K2.0014803 Joystick Pwr. cable for Transvideo Starlite and SmallHD 503, 2pin Lemo Custom Joystick Pwr. Y-cable for Transvideo Starlite/SmallHD 503 (2pin) & ARRI Starlite (5pin) K2.0010296 TRINITY Ext. Power Cable, D-Tab to 1S 3pin K2.0014264 TRINITY and Artemis Post Extension 3B, 10pin length 8.5in, diameter 1.8in K2.0010466 Artemis Rain Cover Lower Sled K2.0010299 QL Camera Plate MAXIMA / TRINITY K2.0010299 QL Camera Plate MAXIMA / TRINITY, backup K2.0035956 SSB-1, Stabilizer System Bracket for TRINITY, MAXIMA, SAM plates – mounted to the TRINITY Head ARRI/Sachtler Artemis Cine HD Pro Rig, Gold Mount K2.0010321 Artemis Monitor Bracket 6in / 140 mm Rods / 1.5” Clamp) K2.0010443 Artemis Camera Plate 8in K2.0010443 Artemis Camera Plate 8in, backup 15mm Lightweight Support, incl. 15mm Rods Accessoires K2.0010434 Hex Key 4mm/5.32in K2.0040046 CSS Post Tool for Artemis and TRINITY 3D printed TRINITY Centering Tool HEADLOK and Roll Lock Bracket for TRINITY TRINITY-Bumpers, 3D printed Lenovo YOGA Tablet 2-851F to run the GUI and setup the TRINITY Cables for both TRINITY & Artemis: K2.0010540 Cam Power, Cine, 12V, HiCap, ALEXA Mini, ALEXA 35 * K2.0010538 Cam Power, Cine, 12V, HiCap, ALEXA (full size ALEXA LF) * K2.0010472 Cam Power, Cine, 12V, HiCap, Red EPIC * Custom cable Cam Power, Cine, 12V, HiCap, Red Ranger * *All Cam Power HiCap cables will also work as 24V Cables if used with the 24V upgraded TRINITY in 24V Mode Custom Focus Pwr cable to 2pin (ARRI polarity) for Teradek TX Custom Focus Pwr cable to D-Tap (female) Custom Focus Pwr cable to D-Tap (female), backup Custom Focus Pwr cable to D-Tap splitter Custom Cam Pwr 12/24V, Lemo 1S 3pin cable to D-Tap (female) K2.0016274 Case Artemis Gen. 1, Rig, Pelican 1615 Air, with foam inlay The TRINITY Head will be shipped in a foam inlay in original cardboard boxes. The foam inlay will fit into a SKB 3i-2317-14BE case - which is not included in the package. The TRINITY is upgraded with all the available upgrades - like: K2.0024710 24V Upgrade for TRINITY Gen. 1 Quick Lock Plate Upgrade Pendulum Upgrade New high contrast display, July 2022 The Artemis Cine HD Pro is upgraded to meet al specs of an ARRI Artemis Cine Broadcast – 12/24V power supply, high capacaty wiring (up to 10 Amps), hot swap, 3 battery mounts, 2x HD SDI Video and Tally support. The 1.8in Post and the 2in Gimbal allow up to 40 Kg / 88 lb payload. The Rig (Package) is constantly serviced and upgraded by ARRI CSS and comes with a K2.0010321 Artemis Monitor Bracket 6in / 140 mm Rods / 1.5” Clamp) that supports any Transvideo 6in CineMonitor. I am asking 42.500 € (without taxes) The Package is in Germany, buyer pays for shipping.
-
email: dani.dagher@hotmail.com Artemis Arm (23 kg) 4000$ OBO recently serviced by Arri new Arri socket block Sachtler soft bag Arri rain cover extra rope segment K5.0011809 (75€) J bracket for low mode
-
Looking for an 1.5" Artemis Docking Bracket from Sachtler/Arri with a tilt function. I hope someone can help. Thank you
- 1 reply
-
- docking bracket
- artemis
-
(and 3 more)
Tagged with:
-
Hi everyone Please note(!): This sale/post is for a friend. To avoid any misunderstanding, I also used to own an ARRI Artemis Cinebroadcast lower sled, but was able to sell mine, so this is a different one. I'm just helping out a friend. For sale is an ARRI Artemis CineBroadcast lower sled (battery hanger). You can use it to convert your Trinity into a Steadicam, also it might be of interest if you're in the market for an Artemis CineBroadcast Rig anyway. It was purchased towards the end of 2018 and has been used only on a couple of days in total, as the owner does mostly Trinity. The lower sled is in pristine condition and is fully functional. You can purchase it with or without the third battery plate. The lower sled will be shipped form the UK. Price with the 3rd battery plate. 4300 £ (british pound) Price without 3rd battery plate 4000 £ (british pound) Buyer pays for shipping and any money transfer fees. For more details drop me a message. Cheers Ozzy
- 1 reply
-
- artemis
- arriartemis
- (and 8 more)
-
Selling my Artemis with everything you could need for transport, power and camera support. All gear was never loaned or rented, and always treated like royalty. Asking 28k, Located in NYC, willing to ship at buyers expense, but priority given to local buyers first. Not looking to part out. Arm and Vest NOT included as I am keeping those. For a full gallery please look here. Full List: Cases: 3x Pelican Storm iM2450 with pad Pelican iM2950 Storm with pad Power: 6x "Switronix HyperCore GOLD 150Wh (14.8V, 10A)" Anton Bauer TM4 Core SWX Fleet Q Gold Mount Four-Position Charger Core SWX GP-TA Gold-Mount Hotswap Power Plate Adapter Anton Bauer SO-XLR 4-pin XLR Snap-On Plate Transport: American Grip Steadicam LS32 American Stand Leg Adaptor Wheels Inovativ Scout Evo 37 Inovativ Steadicam System Inovativ Stand Hanger Video & Focus: Teradek Bolt Pro 300 TX Teradek Bolt Pro 300 RX Bartech Handset Heden M26VE Motor fStop Wireless Receiver v2.1 Run/Stop cables for Arri cams 2x Rechargeable D Batteries w/ Charger Steadicam: SmallHD 703 UltraBright On-Camera Monitor Blackmagic Design Video Assist Arri Artemis Cine Broadcast 1.8in Artemis Docking Bracket with Pivot Yoke Upgrade, 1.8in Cam-Jam QUATTRO II Monitor Arm with integrated yoke Artemis Focus Bracket Steadicam Support: Artemis Camera Dovetail Plate, 8in Cat Griller 16x9 Cine Lock Quick Release Arri Alexa EVF Adapter 18” PA Long Plate w/mount accessories Various screws, tools and other accessories. Can be detailed separately. Steadicam Cables: "Aux Power, Lemo 0B 2pin" "Cam Power, Cine, 12V, HiCap, ALEXA" "Cam Power, Cine, 12V, XLR, HiCap" "Cam Power, Cine, 24V, ALEXA Mini" "Cam Power, Cine, 24V, Fischer 2pin" "Cam Power, Cine, K2.0010540 12V, HiCap, ALEXA Mini" MultiTap Breakout Cable
-
Hi, i m selling: ARRI artemis Spring arm Pro Set with standard industrial arm - vest connector. includes: K2.0010327 1x artemis Spring Arm / with 23 kg springs K2.0010435 1x 6 mm Hex Key (1/4'') K2.0010463 1x Arm Soft Bag K2.0010434 1x 4mm Hex Key Price when new: netto/before tax 10.070€ purchased 16.08.2017 Only used by me. I also sell my Set of Springs with 26kg payload. Price when new: netto/before tax 1.990€ bought 15.07.2020 You get a ordinary bill with Taxes. You can come by a check the Arm. I´m based close to Munich in Germany. Feel free to send me your offer. Greetings, Janis
-
Mounting 16mm on Artemis Cine broadcast
Fernando A. Vazquez Schmidt posted a topic in Steadi-Newbies
Hi, I have been asked to mount a 16mm camera on a Artemis Cine broad cast, asking local Steadicam OP´s on what I need to have in mind the Image monitoring is one of the subjects I haven´t thought about, what is best for converting analog to digital? and what other things I need to have in mind? Thank you for your time. -
Hi everyone I'm selling my ARRI Artemis CineBroadcast lower sled. It might come in handy when you own a Trinity, so you could convert it to a regular Steadicam when you need one or if you're in the market for for an Artemis rig anyways. It has signs of usage here and there, nothing major though as you can see on the pictures and is fully functional. It doesn't include the third battery plate. The lower sled is located in Berlin, Germany. Contact me for more details at info@ozzyoksuz.com Buyer pays for shipping and money transfer fees. I'm asking 4300,- € Euros Cheers
- 4 replies
-
- battery hanger
- battery hangers
- (and 7 more)
-
Hi everyone I'm selling my ARRI Artemis Camera Power Lemo 1S 3pin to 4pin XLR 12V cable, which can be used with the Artemis CineBroadcast and the Artemis EFP Rigs for video cameras, ARRI SR I, SR II or AATON. It has never been used so it's brand new. Buyer pays for shipping and money transfer fees. I'm asking 80 Euros. Cheers
- 2 replies
-
- artemis
- camera power
-
(and 4 more)
Tagged with:
-
Hi everyone I'm selling my ARRI Artemis Camera Power Lemo 1S 3pin to 2pin Fischer 24V cable, which can be used with the Artemis CineBroadcast and the SRH-3 head for ARRI SR III, LT, 435, 535 cameras. I've used only a couple of times, hence it's in pretty good condition. Buyer pays for shipping and money transfer fees. I'm asking 100 Euros. Cheers
-
- camera power
- power cable
-
(and 5 more)
Tagged with: