Search the Community
Showing results for tags 'dm-2 motor'.
Im selling my beloved Preston FIZ System. Its in very good shape and working condition. It was my backup on most shoots and beiing honest to myself, I don't need it. It's still 3G and works great as a system. I never had any problems... its Preston, what else to expect. Should you want to upgrade to 4G, Pretson can do the HU3 for about $.300. However you would need to find a new/used G4 MDR Unit. Some of the parts have never left the case. The package contains... Pelcian Case #4060 Hand Unit 3 [w/6xRings, 2xLi Batteries, Charger, Grip #4102 MDR-2 Motor Driver w/ Tranceiver Lid, Antenna, 24v #4200 DM-1 Digital Motor [with 15mm rod & .80m output gear #4201 DM-2 Digital Motor [with 15mm rod & .80m output gear #4221 0.80M output gear .50" wide 2x #4240 0.50M gear Canon Video - Focus, Iris, Zoom #4241 0.60M gear Fuji Video - Focus, Zoom #4242 0.40M gear Fuji Video - Iris #4301 Arri 19mm Swing Arm [side rod #4302 Arri/Panavision 19mm Swing Arm [top rod 3x #4320 Step Down Bushing 19mm/15mm Arri #4333 Moviecam/ Arri Bracket #4400 Main Command Cable 30' 2x #4410 Motor Cable [w/straight Lemo connectors 24“ 2x Motor Cable [w/right angle Lemo connectors 24“ #4435 Camera Cable: Sony Hi Def (MDR-2) #4499 Motor Driver Power from Arri 24Volt/Moviecam #4521 Camera Cable: Arriflex 435/535/SR3/ Mvcm 3 pin (MDR Not on Pics but included: 2x GPI PRO Power 9“ for MDR GPI PRO H-Bracket for MDR asking 10.000€ or best offer buyer pays shipping & transaction fee / additional 19% VAT apply for european buyers
I’m finally moving out some of my old Preston gear as I make some upgrades. This MDR served me well through many TV shows, commercials, and features, and was babied in its life before I got it. I carried this kit (without a Hand Unit) onto many shows, and it proved valuable. If you have a Steadicam body on the show, leave this MDR on the Steadi body, and your focus puller just has to switch channels on the hand unit from your studio camera. My current show has gone all WCU-4, so I’m not getting enough use out of this to warrant keeping it right now. The MDR was firmware updated in mid-2017, and works beautifully with even the most updated HU3. This package has a goldmine of cables, more than in many rental units. There are over $2000 in cables alone in the kit, especially the sometimes hard-to-find originally $600 Cinetape interface. I paid $4000 for this package in May of 2016. Asking $2750 for the package with all cables. Will not part out. Email me if you’re interested. email@example.com - Preston MDR-2 with G4 Blue Dot Receiver Board (Updated Firmware 2017) - Cinetape Interface Cable (the notorious $600 cable) - RS Cables: - 2x Arri RS - Red Epic - Sony F55 - Red One - Panavision - Power Cables: - 3 pin LEMO (Steadicam standard 0b small) to MDR Power - P Tap to MDR Power - Arri RS to MDR Power - 12v Panavision to MDR Power - 24v Panavision to MDR Power 25 foot Command cable (HU3 to MDR hardwire) Also available as a kit with: DM-2 Motor, PAM Bracket (19mm) and cable for $4500 total (will not separately sell motor) Also available separately: Microforce V+F Zoom Control (analog) for $750 with 30 foot and 6 inch Microforce to Hand Unit cables