Search the Community

Hello everyone, I am selling my second kit, which currently serves as my backup rig. This is the exact trusted rig I started my Steadicam journey with some years ago, and it has been meticulously cared for ever since. I would honestly love to keep this as my backup system, but my current volume of Steadicam work doesn't really justify keeping such a rig —especially one equipped with a Volt— sitting in a closet. It deserves to be out in the field. I truly hope it goes into good hands and lives many more adventures on set. This is also a chance to get a rig equipped with the original OG Volt. While, as many will know, it is discontinued, full service and technical support are still active. OVERVIEW & CONDITION: Everything is in truly excellent condition. The gear has only been used in studios, indoor controlled environments, or at home for training—never outdoors. Everything has been handled, transported, and maintained with the utmost care. Top and bottom stages are rock-solid and completely vibration-free. The Volt works flawlessly, the gimbal is incredibly smooth, and the rig balances perfectly (the 180° test is spot-on using the Smartsystem counterweight and a washer). To demonstrate the pristine condition of the gimbal, a spin test starting from a 5-second complete revolution duration takes 2 minutes and 38 seconds to come to a complete stop, which is high tier performance. You can watch the video here: https://youtube.com/shorts/oC3lCauk3c8 ITEMS: SLED Calicocam V18 (1.5" post) made in Italy by Maurizio Aloi, with Maurizio's gimbal -Tiffen Volt -2x 3G SDI lines, various power outputs, and a dedicated tally line running along the post -3x battery plates -12v hotswap on all 3 plates, or 24v with the double plate -Monitor and battery rods swapped from carbon fiber to highly durable anodized aluminum -Level bubble mounted to the bottom stage -Custom dropdown bracket for the Volt brain box by Cam-Jam, slightly shorter than the standard, still leaving space for the front lemo 0b powering the Volt or other devices (required angled connector, correctly sized custom cables are included) -Smartsystem Volt counterweight -Volt protection and low mode collar by Jerry Holway & custom cable wrangler designed by me -Possum Solutions cheese plate for the Volt brain box. Giving many options for low mode monitor. -Cables&cables (including custom ones made by me of the right lenght, to eliminate dangerous dangling wires) -Steadicam plate made by Maurizio with built-in level bubble -Spare parts: original Volt brain box bracket by Maurizio, spare screws, fuses, various AKS -Nanuk flight case with a custom, professionally water-cut hard foam insert + extra protective neoprene top from mycasebuilder.com -monitor not included- BRAVO ARM - made in Italy by Maurizio Aloi -Payload up to 35kg -8 springs, light set and heavy set -Custom longer arm post in titanium -Max Cases flight case with convoluted foam ZEPHYR VEST -standard big socket block -Pristine condition, like new -Customized with side straps -removable if desired- Or, in alternative: EXOVEST -Tiffen standard big socket block -Well mantained, no screws missing! -Shows slightly more cosmetic wear but is still in great condition and 100% perfectly working Please note regarding photos: -In the photos of the Exovest, a different socket blocks is visible. The vest will be sold with the original Tiffen socket block. -One photo shows the rig fully built with a training camera, monitor, batteries, stand, g-zoom etc. for demonstration purposes. Only the items explicitly listed above are included in the sale. -A downloadable Google Drive folder with all the photos is available as well: https://drive.google.com/drive/folders/10SSwpKp3e6XpmkBUYF7rSW9Yo4RoZdNN?usp=drive_link Original retail value: approx. 33000 € (excluding the Exovest). Asking for 21500 € for the kit with Zephyr vest, or 23500 € for the alternative with the Exovest. Import fees, customs duties, and/or local VAT are the sole responsibility of the buyer. Local pickup is possible. Worldwide shipping can be discussed, with all shipping and insurance costs paid by the buyer. If requested, I can consider selling the sled or the arm separately. For the time being I will not consider selling only the vests separately. If you buy the full kit or the sled only, I also have a brand new G-Zoom of the right handle size available. I can include it with a Fujinon adapter for an extra 800 € Available for inspection and testing in Basel, Switzerland. Please check the many photos attached and feel free to write me if you need any specific photos or if you have any questions!

Making a professional pivot and selling my full Steadicam kit — used but excellent condition. Sled & Monitor Steadicam M-2 sled (no Volt) w 2-stage indexed post TVLogic monitor (lemo and D-tap power cables) 3rd battery mount, gold mount laser-cut foam case included Arm G-70X (lower arm ride adjustment knob is a little stiff — serviced by Robert Luna) Vest Arri Artemis vest, all pads included Stand American stand w/ Backstage wheels and Hill docking bracket — rings for standard and low mode Accessories Kenyon KS-6 gyro cables: 12V/24V ARRI 435, 2x 24" coil SDI plates: long plate, SOS plate, gold mount weight Hill angled low-mode bracket low-mode monitor bracket w 2x 4" threaded rods (monitor not included) Prefer to sell as a complete kit, but will part out if necessary. Batteries not included. Located in Los Angeles. Asking $34,000 USD https://drive.google.com/drive/folders/1dhsCWI50Vfl4Tnqti4NCTEo7spo1DJvZ?usp=sharing Steadicam Kit - Sheet1.pdf

Hi, Due to change in Career, I am now selling all my Steadicam gear. Everything is in really good condition. Has been well taken care of over the years. The sled was originally a Master Sled and I had it modified by MKV. The gimbal and handle are the only original parts remaining on the sled. I have used this rig for all kinds of camera setups including the Arri Alexa XT. I would prefer not to sell items separately, but I know I have a very strange kit and might have to sell for parts. I am willing to separate the sled in sections for sale if you are interested in the D-BOX. This will be a last resort if I cannot find a buyer. I have the following items in the kit:- Master Series Arm + Low mode bracket Ultra2 Vest. The shoulder plates were changed last year. Practically new. The vest has not been used much since replacement. MKV sled with Betz Top Stage + V4 D-BOX for Top stage and Base. No micro vibrations. 2 Battery plates Boland Monitor with power cable 2 x Hard Cases + Soft bags for vest and arm SOS plate from ADICAM Weight Cage American Stand Heavy Duty Docking Bracket 2 x original docking rings from master sled. The rings were slipping off so I have replaced it with a Jerry Hill Docking Ring (1.580") XLR power cable and Arri 24v power cable Beillen V-Mount Battery Charger and 3 x 98wh Beillen Batteries. I have 2 Hawk Wood batteries but they dont have much juice left. They serve a heavy weight purpose on the rig. Asking £12,800 (No additional VAT) Give me an offer. I am very open minded. Based in North London. I am willing to travel anywhere in the UK if needed. If you are new to steadicam, I am more than happy to spend a day to go through everything. Thank you very much for your time. Please dont hesitate to ask me questions. For quicker Replies: info@aadhar-gupta.com +44 7950 168591

I am selling a complete Steadicam kit with a LX Vest, G-50X Arm, and a heavily modified Archer Sled. Complete kit for $13,000 OBO. Available near Times Square in Manhattan NY. Everything is in good working condition, this is a great starter kit! - It is complete with all basic accessories. Major Components: -Steadicam LX Vest -G-50X Arm (Label says G50, but bearings were upgraded) -Heavily Modified Archer Sled (Internal HD Wiring, 12/24v Selector, Sled base is modified-see photos, adjustable battery position ) Accessories: -Tv Logic Monitor -4 IDX V-Mount Batteries -V-Mount 2-Battery Charger -Low Mode Bracket -F Bracket for Low Mode -Docking Bracket -Sony VCT Quick Release Plate -Assorted Cables and small Tools (see photos) -Assorted bolts, zip ties, replacement BNC connectors (see photos) -Practice Weight Cage -Two large cases that fit entire kit Feel free to message me with any inquiries!

Selling Steadicam zephyr package located in Huntington Beach, CA 23lb camera payload. Have used this rig the past 4/5 years and upgrading to a larger rig . Recently serviced by Tiffen about a month ago. Includes: zephyr sled(gold mount), zephyr arm, zephyr vest, Marshall 7in sdi monitor, screw-on 1lb weights, camera plate, collapsible stand, travel hard case, monitor power cable, 2 sdi cables. Accessories included: 2nd battery mount 12/24v (gold mount) Skymagic cg monitor mount Skymagic larger gimbal wrap grip Marshall digital level P-tap splitter powered from sled Zalex longplate-m 2pin Fischer $8000.00 Practice camera and batteries not included

FULL KIT. READY TO GO! Upgraded to allow 12/24volt power. The kit includes - STEADICAM KIT - * Sachtler Artemis EFP Pro HD-SDI (12volt & 24 volt) * Transvideo CineMonitor HD6 SuperBright * SteadyRig Silver Spring Arm (13-63lbs / 5.9-28.6kg) * Steadicam Master Series Vest * Preston HU2 w/ 2 x DM1 motors (11 focus rings) * IDX CamWaves HD v-lock * 9 x V-lock batteries (‘4 x 230Wh’ ‘3 x 160Wh’ ‘2 x 95Wh’) * 4 block charging station * post extension & J-bracket * wet weather gear for vest, arm, monitor, steadicam docking cover & sun guard * 2 x baseplates (including one with 15mm AC support rails) * 4 x camera screws, 2 x custom Alexa screws, various BNC adapters * vehicle mounts w/ scaffold u-bolts (2 inch) * travel case w/ c-stand hidden inside lid (with EXTRA sex appeal) Cables - STEADICAM CABLES: Steadicam to Panavision power cable 2 x Steadicam to Monitor cable (2-pin lemo – 4-pin XLR ‘12-volt’) Analogue monitor cable (BNC – 8-pin lemo) ‘12-volt’ Steadicam to Camera cable ‘24-volt’ Steadicam to Camera cable ’12-volt’ Steadicam to 4-pin XLR Steadicam to Bartech power PRESTON CABLES: 4 x Preston to motor cable (2 straight, 2 right-angle) Steadicam to Preston power cable D-tap to Preston power cable ALEXA Run/Stop cable $42,000USD + shipping from Melbourne, Australia. PHOTOS ATTACHED (IDX CAMWAVES INCLUDED, I was unable to attach a photo due to size) Glenn Clayton info@glennclayton.com

I am selling this for a friend. Steadicam Scout Comes with: Sled (18lb payload limit) Vest Arm Docking Stand Monitor Low mode bracket Spare socket block HDMI Cables Rig is a year and a half old and has only had one owner, selling it for future endeavors. Manages DSLR/RED/Canon C/Sony FS cameras with ease and agility. Please note, there is a frayed HDSDI cable. Asking $4250 OBO