Search the Community

GPI PRO Titan Arm located in Los Angeles. Comes with two blue and two black canisters, arm bag, and two posts. Was serviced recently and not used since. Its in perfect shape. $9,999 USD. Open to offers. Buyer shipping IMG_9274.HEIC IMG_9271.HEIC IMG_9270.HEIC IMG_8954.HEIC IMG_8953.HEIC IMG_8952.HEIC IMG_8951.HEIC

For sale is my well looked after Gpi-Pro Cinelive Sled. Reluctantly selling as I cannot afford to keep this sled anymore! Read carefully below outlining upgrades, modifications and improvements made! Supply in Gold Mount or V-Mount - read on... Starting Price is £16,500 (+vat if UK based). Roughly $22,140 USD / €19,075 EUR. Additional options outlined below! One previous owner, bought new from Optical Support in 2018. Upgraded GPI gimbal to Volt system in 2020. Upgrade was done by optical support. Replaced main Pan Bearing in 2025. Performs wonderfully! Replaced threaded post connector and receiver in 2025. A great sled from GPI Pro. Check out what upgrades are possible, as the sled is still fully modular. In the future, one could add the superior new Lower Electronics, etc. Possibly 1.75" Post....? Info from top to bottom: Topstage & Upper J Box Betz Topstage & Plate Shimmed to correct clamp pressure on betz plate. Other 3rd party plates also fit well. Cinelive Upper J-Box Electronics Modified to add a 2pin accessory lemo (0B - pin 1 GND), wired into the main 12v line (rather than thinner inadequate wiring from the previous connector). Upgraded HD-SDI BNC 75ohm inputs to better Neutrik sockets. Less worn than previous stock parts. Volt Control Box Cam-Jam rigid control box mounting to betz topstage. (https://shop.cam-jam.de/product/volt-mounting-system-high/). Much better than stock tiffen rod mount (also included). Custom volt control box small power cable with angled lemo connector. (spare included) Custom volt control box front mounting plate for low-mode monitor or accessory. 3/8"-16 threaded insert with arri pin lock standard + 2x 1/4"-20 theaded holes. Easily removable if not required. Lightweight anodised green aluminium. Centerpost: Standard centerpost II 1.5" from Pro. Replaced threaded part, outpost receiver & locking ring (bayonet mount) 2025. Replaced nylon balls 2025 for inner post that run down the channels when extending post. Post Tool included. Gimbal: 1.5" Gpi Pro Gimbal with Tiffen Volt. Standard grip version. Originally upgraded 2020. Serviced in 2025 though optical support, new improved shimming/centering assembly at tilt bearings. Latest firmware. Added rubber grip racket tape around gimbal grip and gimbal handle for improved control and better feel. Can remove if needed! Nice in cold weather! Installed new Pan Encoder + cable 2026. (spare included) Installed new Pan Bearing 2025 purchased direct from Pro for improved performance. Makes a difference! (spare/old bearing included) Standard Volt gimbal control cable. (spare included) (Spare volt belts included) Previous Gpi-Pro Gimbals parts included (non-volt parts). Gimbal steadicam tool included. Monitor Bracket and Monitor 3 Options here: Option A (most OK-ish option) +£0.00 Gpi-Pro Telescoping Monitor Braket + Transvideo 6" Monitor 5/8" telescoping rods Cam-jam Yoke to Pro/XCS style legacy spud. Transvideo 6" monitor. Not as bright as most recent transvideo monitors. 2x Lemo Power cables and HD-SDI cables included. Good for a starter, or backup. May be able to use with latest Gen5 battery rack from pro with these rods... Option B (Better if you have another monitor) + £800 / $1070 / €925 Superior Cam-Jam Quattro II Monitor Bracket & Wide Yoke (no monitor). Great telescoping rigid monitor bracket and Yoke. Can include the mounting arms for SmallHD 703 (see picture) Other mounting parts for other monitors available at cam-jam.de Option C (best option) + £1800 / $2415 / €2080 Superior Cam-Jam Quattro II Monitor Bracket & Yoke + SmallHD 703 Monitor. Includes smallHD 703 monitor with matte screen protector. Used scratches & marks but functions fine. Includes custom flat weight plates for adding weight to the back of the monitor to help with dynamic balance. Stackable. Includes combination power and 2x HD-SDI cables. Use one to loop out of the monitor and back up the 2nd HD-SDI line in the post for an additional output in the topstage for a low mode monitor. Lower Cinelive J-Box Includes x2 Jumper Blocks. 12v all parallel block. Any plate combination can be used. 1, 2, or 3 batteries. 12v (14v) mode only. Shares the load between them. Standard 12/24v block. 14v from positions marked "C/M". Combine with battery in "A" position to create 24v. (Note: "A" position can change based on preference - see Battery Hanger section below). Upgraded HD-SDI BNC connectors 75ohm to Neutrik. Less worn than previous. Battery Hanger GenIV. Lighter weight than the previous GenIII, and makes a shorter sled ~25" fully collapsed (preferable operating feel to me). Modification: Quick change battery plates: Added thin custom aluminium plates with multiple hole patterns. Allows the following: Quick change from Gold Mount to V-mount by swapping plates. Can be done on set. Battery plates are on quick release connectors. Plates use M3 socket head cap screws. Great for travelling if you need to hire different battery types, eg different countries' or rental house's availability! Can change orientation of the battery plates. For AB V-Mount plates which have the same mounting hole pattern, the plate has to be attached backwards otherwise the battery can't be mounted due to the post/j-box in the way. Can move the plate under the post further back if more weight is required away from the monitor for dynamic balance. Good to have options! Can swap the rear 2 plates using the connector inside to determine whether the lower (default) or upper plate is designated "A" for 24v mode. Only weighs an extra 150g / 5oz in total for 3 plates which helps adding some mass to the lower stage of the sled. Upgraded Shottky diodes in Gold mount plates for slightly lower voltage loss. Can Supply AB Gold Mount or V-Mount Extra set of 3 other plates w/diodes installed (+£250 / ~$340 / ~€290) Case: Pelicase 1630 included with cut out foam Dock Tiffen Volt Dock Included Additional Cables 24v Rencher Cinelive -> Arri Alexa 35/265/Mini/MiniLF/Amira Coiled power cable included. Selection of HD-SDI BNC cables 14v Cinelive -> 4pin XLR power cable Spares: Spare Tiffen Volt Control Box Rod mount for Betz topstage Spare Post threaded connector Spare pan bearing (old bearing) Spare Volt control box power cable Spare Volt Gimbal Cable Spare Volt Pan Encoder+cable Spare 10A & 5A Klixon push pull fuses for Lower J Box. Spare volt gimbal shims and belville washers. Spare Volt belts. Please email me at jake(at)jakemcclean.com for more info, any questions or more pictures! Also available may have some Jerry Hill 1.5" docking rings if you already own or prefer to use a JH dock. spin1.mov

Hi everyone, Selling my GPI Pro2 Sled with Pro Titan Arm / Transvideo Hd6 monitor / batteries / cables : GPI PRO SLED * -Gen2 HD Upgraded- * Pro Gimbal VZ Grip * 3 Jumper blocks * 3 GoldMount to V-mount adapters GPI PRO Titan Arm * 4 Blue Canisters * 4 Black Canisters * 2 Pro Arm wrench * 2 posts 6″ * Arm Bag and Canisters bag * « Old School » low mode bracket MONITOR * 1 Transvidéo HD6 SBL Evolution (with cables x2) * 1 Artemis Yoke Monitor Bracket rods 15mm for Transvidéo HD6 * 1 GPI Monitor Bracket (spare) * 1 Redbyte Decimator HD/SD downconverter (with power cable) POWER * 6 batteries RedPro 195Wh/13,2Ah 14,8V (with D-Tap et USB) * 1 charger VL-2+ Endura (2 slots) ACCESSORIES * 3 GPI dovetail Plate * 1 GPI Docking bracket * 1 Pelicase AIR 1615 * 1 Pelicase (L) 78cm x (W) 48cm x (D) 30cm CABLES * 3 SDI lightweight * 2x power cables XLR4 (Sony) * 2x power cables ARRI Alexa * 1x power cable ARRI Mini/LF/etc * 1x power cable RED * 1x power cable for Betz Wave * Others accessories cables (No stand / No Vest) Located in France (South of France, next to Marseille), sale within France or Europe preferred. More photos available for serious inquiries. Feel free to send me messages about the rig ! Local pickup preferred Buyer pays for shipping, insurance and transaction fees. --------- 23000€ ---------

FOR SALE: PRO 2 Steadicam Package – Fully Loaded / Turnkey System Selling my Steadicam Pro 2 package, built out as a complete, production-ready system. Professionally used, well-maintained, and ready to go straight onto set. This is a true turnkey package with everything needed for high-end film, TV, and commercial work—including power, video, wireless, follow focus, and cart. Core System Steadicam Pro 2 sled with telescoping post Pro Arm (blue & black canisters included) Pro Vest + soft case Pro gimbal + VZ gimbal grip Upper & lower junction boxes + donkey box Battery Module II + jumper blocks Monitoring TB6 green screen monitor w/ framelines Pro 2 CRT green screen monitor w/ hood 7" Atomos Shogun Power (Updated) 6x Anton Bauer batteries (basically new) 1x Quad charger + 1x Dual charger Additional Dionic & Hytron batteries Battery racks, blocks, and custom cabling Wireless / Video Modulus 3000 system w/ antenna AJA & Decimator down converters Sony tuner + full cable package Follow Focus Preston MDR system (updated MDR1 + MDR2) DM2 motors, rods, brackets, gears Stabilization Upgrade Betz Tools Wave1 – barely used, like new Rigging / Accessories Universell steadicam Dovetail plates (Betz Tools) Full dovetail package (Arri / Pana / Compact) Low mode brackets, docking brackets (incl. Jerry Hill Gorelock) Arm posts, clamps, rods, wraps, tools Extensive custom cables Cases & Support Custom locking rig case Pelican cases (arm, vest, accessories) American Steadicam stand + rolling casters Magliner Senior cart w/ FilmTools shelves Rain covers + full weather kit Extras Hill vehicle mount (Garfield mount) Hill docking bracket Pogo stick Panavision cover Large assortment of spare parts, brackets, and hardware Condition Professionally used and maintained Fully functional, no issues Ready for immediate production use Price $35,000 CAD Located in Vancouver, BC area Happy to send full inventory, photos, or jump on a call. IMG_6341.heic IMG_6337.heic IMG_6338.heic IMG_6339.heic IMG_6340.heic IMG_6341.heic IMG_6345.heic IMG_6346.heic IMG_6347.HEIC IMG_6348.heic IMG_6349.heic IMG_6350.heic IMG_6351.heic IMG_6352.heic IMG_6353.heic IMG_6354.heic IMG_6355.heic IMG_6356.heic IMG_6357.heic IMG_6358.heic IMG_6359.heic IMG_6360.heic IMG_6362.HEIC IMG_6363.heic IMG_6366.heic IMG_6367.heic IMG_6368.heic IMG_6369.heic IMG_6370.heic IMG_6371.heic IMG_6372.HEIC IMG_6373.heic IMG_6376.heic IMG_6379.HEIC IMG_6380.heic IMG_6381.heic IMG_6382.HEIC IMG_8539.HEIC IMG_8532.HEIC IMG_8530.HEIC IMG_8543.HEIC

I'm selling my Steadicam G-50 back up arm. It's in perfect working conditions, only some cosmetics marks. It has been fully serviced in November 2025, all the parts were cleaned and all the bearings and screw re-oiled. I give it in his original soft steadicam bag with zipper. The arm is located in Barcelona, and you're welcome to come and test it. I'm asking 5000€ ex VAT - buyer pays shipping. Contact me directly at hola@aos.camera

Re upload ! GPI PRO Vest with Cinetex padding and anti-slip waistband. Comes with soft travel bag and spares and Allen T wrenches. Located in London. Bumped to £3,800+VAT Buyer pays shipping.

Selling two lightly used GPI Pro Black Canisters with bag. There are some scuffs and a scratch I highlighted in the pictures. I used them in my apartment when I first got the arm in January 2021, testing the maximum weight with a cage. Other than that, they were never flown on set. Asking $3800 OBO. Located in New York. Buyer pays shipping. Feel free to email or text: ryangreddsmith@gmail.com (914) 588 0534 Thanks!

Selling a GPI pro arm with 4 blue and 2 black canisters. Minor signs of wear which is good if you’ve got less experience, because it makes you look like you have more! Comes with the bag, canisters bag, arm tools, posts, low-mode bracket, and T wrench. Works great. Well maintained. I’ll post more photos of the accessories when I have a chance. original owner. Purchased new. Located for pickup in Atlanta or buyer pays shipping. asking $9,800 obo

Selling my complete GPI PRO 2 steadicam package. Price: $46,000 This setup is a turnkey package for anyone who wants to start Steadicam or needs a backup rig. It was recently serviced at GPI PRO in Los Angeles. It has been well used in many productions. I would like to sell this package as a complete package in the greater Los Angeles area in person. Currently, the vest and the hard mount are not sold separately. Please contact me at info@jiuxinproductions.com with any questions or offers. Below is the list of gear and a link to my Google Drive with pictures of everything. STEADICAM PACKAGE GPI PRO II HD SLED DONKEY BOX III TELESCOPING POST VZ GIMBAL GEN IV BATTERY RACK CAM JAM MONITOR BRACKET SMALL HD DP7 MONITOR TRANSVIDEO STARLITE MONITOR for recording your shots or low mode monitor PELICAN AIR 1615 CASE for sled PRO VEST TORSO PAD 23 1/2 WAIST PAD 30 SUITCASE for the transport of the vest and arm PRO TITAN ARM WITH BAG 4 - BLUE CANNISTERS WALTER KLASSON HARD MOUNT KIT which includes GARFIELD MOUNT AND HARD MOUNT ACCESSORIES 6” POST 12” POST 4 - CAMERA BASEPLATES MDR MOUNT HILL MDR BRACKET HILL DOCKING BRACKET HILL MAG-DOCK 2 AMERICAN STEADISTAND CAT GRILLER CAMERA PLATE (Steadicam to studio quick transfer) PRO LOW MODE BRACKET HARRISON STANDBY COVER SWITRONIX PRO-X BLANK PRO TOOLS AND MAINTENANCE KIT BATTERIES ANTON BAUER LP4 CHARGER 6 - ANTON BAUER DIONIC XT90 BATTERIES PELICAN 1520 CASE FOR ANTON BAUER BATTERIES CABLES 3 - MDR POWER 3 - RED POWER CABLE 3 - PANAVISION POWER CABLE ALEXA MINI POWER CABLE CINETAP POWER CABLE SONY POWER CABLE 3 - ALEXA POWER CABLE 4 PIN XLR ASSORTED MISCELLANEOUS POWER CABLES and VARIOUS LENGTH BNC CABLES Steadicam Package Album: https://drive.google.com/drive/folders/1DHHi_ezkqb2ONsRvVXGHncLrqmqkArVk?usp=share_link

Repost!! XCS Ultimate Gimbal for 1.5” posts for sale!! (Apologies for the upside down photos, the Steadicam Forum likes it this way) Selling due to upgrade to OS Dragonfly that has a 1.75” posts. Bought in 2020 via Optical Support for my old GPI Pro sled. Located in London, UK. £4,250 +VAT ONO Buyer pays shipping IMG_7103.mov

Hi folks, I’m making some life changes and will be letting go of my steadicam package. Package was originally purchased from a wonderful operator named Matt Petrosky out in Atlanta. This was his back up sled and was barely used. I made some upgrades to the package including adding the Volt system, and a low mode setup. Live in LA prefer a local buyer but can ship at the buyer’s expense. Contact me here if you are interested at or at allen@scriptlessmedia.com Package includes: GPI PRO II HD SLED (SD internationals) DONKEY BOX II Cinetronics Monitor Cam Jam Low mode monitor rod system Ninja V (low mode monitor) Cam jam monitor bracket Pelican 1650 (sled case) Pro vest ArmX1 Case ArmX1 with 4 blue and 4 black springs (only 1.5 years old) Rain cover for arm Battery Case (battery and charger case) 5x Batteries 4 Broadcast 150Wh batteries 1 Batteries 4 Broadcast dual charger American Stand with wheels Jerry Hill Docking Bracket Arm post holder attachment 3 arm posts 10in. 8in. 6in. 1 Pro camera plate 1 Zalex Long Plate 1 Arri mini LF plate Steadicam weight cage Various length of high quality BNC cables.

Hi everyone, I am selling my full GPI PRO kit. Itemized listed below. Asking for $46,000. Located in Los Angeles. In-person transaction and cashier check only. For individual prices and questions, please email info@jiuxinproductions.com Sincerely, Jiuxin Zhu GPI PRO Vest GPI PRO Titan Arm with 4 Blue Canisters GPI DB-III GPI PRO Cine Live Upper Junction Box GPI PRO VZ Gimbal Grip GPI PRO Gimbal GPI PRO Telescoping Center Post GPI PRO Cine Live Lower Junction Box GPI PRO Gen IV Battery Rack CAM JAM Quattro II monitor arm with integrated yoke, SmallHD DP7 mounting kit, and Adapter ring kit for Pro 1,5" outer post AND inner post SmallHD DP7 GPI PRO Lowmode Bracket Hill Docking Bracket American Grip Steadicam Stand 2-Rise Pelican Air 1615 with foam Anton Bauer LP4 Quad Battery Charger (Gold Mount) Anton Bauer Dionic XT90 Gold Mount Battery Anton Bauer Dionic XT90 Gold Mount Battery Anton Bauer Dionic XT90 Gold Mount Battery Anton Bauer Dionic XT90 Gold Mount Battery Anton Bauer Dionic XT90 Gold Mount Battery Anton Bauer Dionic XT90 Gold Mount Battery Harrison Standby Camera Cover Fikenca Steady Vest Bag ST508 WK Hardmount Kit Transvideo 5" OLED StarliteHD+ Hill Mag-dock2 12" Gimbal Arm Post Camera Plate Camera Plate Camera Plate Camera Plate Pelican 1520 Switronix Pro-X Blank Catgriller Assorted Cables

This is an unused GPI Socket Block. I bought it as my spare after breaking one about 10 years ago. $ 1000.00. Free shipping to US

GPI Titan Pro arm including 4 blue canisters for EURO 8800,- Arm is in excellent condition! Europe sales preferred - (Netherlands, Maastricht area) Included: - Bag with soft padding - J-Bracket for 5/8” post - Sachtler/Arri D-bracket for low-mode setup - Flowcine low mode grip handle - Allen keys for arm and canisters - GPI keys and spare kit for Titan Pro arm

[REPOST] GPI PRO TITAN ARM 6 CANISTER FOR SALE (WITH FREE CASE BY CASE DESIGN UK) Bought and Serviced by Optical Support UK List of items includes: - GPI Pro Titan Arm Chassis and original bag - 6x Canisters and original bag (4x blue canisters, 2x black canisters) - A 6” arm post with arm post clamp - GPI Pro Titan Arm Parts & Tools (A repair kit including a bag of spare screws/nuts, a 5/32” T bar allen key and a pair of the GPI PRO blue arm tools). - Metal Protective Case by Case Design UK. Please note that some superficial marks are seen on the case and the steadicam arm, like-brand new. Please see photos attached for reference. New: £16,718 (+ case £711) Price: £15,000 (+ Shipping) (price already includes tax). Location: London, United Kingdom. Shipping worldwide. (If local to London, I am happy to pay for delivery. However, the buyer will need to pay for shipping if outside of London. To read further info about the sale, please see below. Email if interested: rufai.ajala@gmail.com , please also CC my virtual assistant: ameliaghphoto@gmail.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hello everyone, I’m selling my GPI Pro Titan Arm 6 Canister (with free case by Case Design UK), purchased brand new from Optical Support UK and serviced by them. The equipment itself is in excellent condition, I’m selling due to the kit not getting enough use (I am focusing more on DOPing), and would like to sell to someone who will get plenty of use out of this fantastic piece of equipment. ***Price in GBP and USD*** Asking £15,000 or $19,000 (price already includes tax). Paypal user. I can make an invoice if necessary. *Please note that some superficial marks are seen on the case and the steadicam arm. Please see photos below for reference.* Sale within the UK or EU will be preferred. Located in London, if local to London, I’m happy to pay for delivery myself. However, the buyer will need to pay for shipping if outside of London. Buyer pays money transaction fees and shipping fees. To discuss further please contact me on my email address rufai.ajala@gmail.com , please also CC my virtual assistant ameliaghphoto@gmail.com List of items includes: - GPI Pro Titan Arm Chassis and original bag - 6x Canisters and original bag (4x blue canisters, 2x black canisters) - A 6” arm post with arm post clamp - GPI Pro Titan Arm Parts & Tools (A repair kit including a bag of spare screws/nuts, a 5/32” T bar allen key and a pair of the GPI PRO blue arm tools). - Metal Protective Case by Case Design UK. Today’s retail price for this case is £711 + VAT, however this case will come included free with the sale of the arm. The case was purchased three years ago and has some superficial marks on the outside; however the case is in great condition and works well in protecting gear. Diameters for the case are: Length - 30.1 inches (76.45cm) Width - 22.5 inches (58cm) Depth - 12.5 inches (31.75cm) Please note that I prefer if items are not sold separately, but I will consider offers to purchase a majority of the items. Please contact me and CC my Virtual Assistant with the emails mentioned above to discuss. ***Verification*** Purchase Invoice and Email confirming delivery of Pro Arm from Optical Support LinkedIn: https://www.linkedin.com/in/rufaiajala/ Instagram: https://www.instagram.com/rufaiajala/

Hey, Looking for a Pro Atlas arm with gray canisters or just the gray canisters alone in mint condition or at least well taken care of, not heavily used or scratched. Message me some photos, price and location please. All the best, TOMAS

GPI PRO Gimbal with VZ Grip and Extended Handle For Sale PRO Gimbal VZ Gimbal Grip Extended Gimbal Handle Short Gimbal Handle Gimbal Wrench Extra Main Bearing The gimbal is in perfect working condition. Some cosmetic wear and tear...see photos below. It comes with an extra unused main bearing, gimbal wrench, and short gimbal handle. The extended and short handles share the same bearing. The gimbal new (without the short handle and extra bearing) is $7900...asking $5000. Please email, text, or call if you are interested or have any questions. Thanks! Scott (213) 880-2550 scott.camera@mac.com

Hello, I'm selling my steadicam vest. I bought it 2 years ago as my first vest. The vest is in very good condition and has a lifetime warranty from the seller / smartsystem.com . For more info on the vest, here is the link: https://www.smartsystem.com/product/vest-lite/ located in czech republic / europe. I am asking 1600€ + shipping

Hey guys, selling my Tiffen Archer 2 Sled (gold mount). Archer 2 Sled purchased new January of 2019. (Volt Compatible) (1) Thermodyne Case (1) Jerry Hill Docking Bracket (1) Jerry Hill Pro -> Tiffen Arm Post conversion (2) Jerry Hill Docking Rings (1) Tiffen third battery hanger dovetail.. (1)1.5 Gzoom Controller (1) Gfocus Amp + cables (1) Tiffen Tally Light / sensor cable. (1)Atomos Shogun Flame 4k Monitor Gently used, well stored. Asking $18,500.00 Located in Los Angeles.

Hello Everyone, I am selling my spare GPI Pro Gimbal, S/N 545 (this is the serial number for the gimbal itself that was printed on the original-style yoke which has since been sold separately; the new gimbal yoke S/N is 642x). For 1.5” center posts. Included in the sale is: Standard Pro Gimbal Grip with Clamp Short Pro Handle XCS Ergo Handle (Regular) Gimbal Wrench Spare Pan Bearing The Gimbal is in working order (last serviced by Jack Bridges on 8/18/2020 and the gimbal has barely been used since its last service). The yoke has been upgraded to the newer version, which is thicker and more robust. There’s normal wear and tear throughout. The gimbal cap has some marks from what appears to be concrete (not sure where these scratches came from as it occurred when the gimbal was out of my possession, however any issues that resulted from the damage have since been addressed). Asking $3,800 OBO plus shipping (gimbal is available for pick-up in Los Angeles) Contact info: aaron.gantt@gmail.com Aaron

What do you use for your low-mode monitor? I'm flying a GPI kit and have been balancing with the Small HD 702 as my low-mode monitor in order for quick high/low transitions. I love having it there because it really does make things faster. But the 702 is abysmal in direct sunlight, and is too clunky to be practical. And also powering the dang thing via d-tap is an issue. I'm looking into the BlackMagic 5in Video Assist as a budget option, and a Transvideo Starlite 5in as a more permanent solution. A monitor that supports on board video recording is not strictly necessary, but I'm definitely leaning towards a monitor that supports that feature. The BlackMagic 5in seems alright but you have to do some surgery in order to power it properly from your sled. Any thoughts or tips on the matter would be much appreciated! Cheers, -Dan

Selling my entire GPI PRO rig. Unfortunately, chronic back issues have stood in the way of this being a long-term career option for me, so it's time for it to go. CineLive sled (minus topstage) was purchased used in 2019 from a NYC-based operator (first owner, Calvin Falk) and serviced by Jack about 6 months later; vest and arm both purchased new in 2019; upgraded to new Betz stage in late 2019. I have never rented the equipment out to any other operator. You'll find the typical scuffs, etc., but overall everything is in pretty good cosmetic condition (the vest is especially clean). And more importantly, everything is in fully-functional condition, has been well taken care of, and is 100% ready to shoot. All signal and power cables for most camera types are included and detailed below. For now, I'm selling the equipment as a FULL PACKAGE ONLY. The rig is currently located in Seattle, WA. I'd prefer a local pickup, but will consider shipping within the United States at buyer's expense (shipping + full insurance + PayPal fees). $45,000 OBO SEE PHOTOS HERE: https://imgur.com/a/mtxoOkW I'm happy to answer any questions via DM, email, or text. ph: 509-470-0293 email: samsrice@gmail.com Thanks for looking! SLED: PRO Center Post Telescoping PRO Gimbal Gen IV Battery Rack PRO CineLive Upper/Lower Junction Boxes Boland BVB07 Monitor CamJam Quattro II monitor arm with integrated yoke Betz Tools Top Stage + aks: universal dovetail plate Sony & Amira V-Mount snap plate Alexa/LF/Plus/XT adapter Tripodlokplate (SOS plate) dovetail-mounted rod bracket w/ extra rods (chrome) rods for stage-mounting rods (blue) Transvideo Starlite monitor (low-mode monitor): PRO-Starlite power cable Cam-Jam mounting bracket felt bag Hill Docking Bracket Camera power cables + bag: 24V ARRI angled 24V ARRI straight 12V ARRI straight 12V XLR RED DSMC2 24V Panavision Misc cables: p-tap power cable for Boland Rencher p-tap breakout (PRO to p-tap) PRO sled tools Pelican iM2950 Storm Case w/ custom-cut foam & Harrison Lid Organizer ARM ($19,270 total new): GPI PRO Titan Arm 4 x blue canisters 2 x black canisters PRO J-Bracket (low-mode bracket) 6" arm post 10" arm post Titan arm tools PRO arm bag PRO 4-slot canister soft-shell carrier (not pictured) VEST ($5,720 total new; no case included—I've always used a duffel bag): PRO Vest Pro Vest tools and misc spare screws BATTERIES ($4,266 total new): 5 x Core SWX Hypercore 150A gold-mount batteries 1 x Core SWX Fleet Rapid Li-Ion gold-mount charger 1 x Core SWX Fleet Q4Ai gold-mount charger Pelican iM2700 Storm Case w/ custom-cut foam for 8 batts, 2 chargers, 4 spare arm canisters MISC. ACCESSORIES: Bag of thin BNC cables (misc lengths, pictured), HDMI cable, and BNC adapters/splitters Bag of camera/AKS screws (pictured) Bondhus 1/4", 5/32", & 1/8" T-handle hex tools Ratworks Gold-Mount cheese plate Cam-Jam mounting AKS ($377 total new including Starlite bracket): Teradek Bolt through hole mount Teradek 15mm rod mount Teradek mounting bracket (L-bracket) 3 x SmallHD misc mounts (for unique mounting situations) Hill ARRI EVF top-mount bracket Harrison Standby Cover Manfrotto short dovetail for DSLRs STAND: Backstage Equipment Steadicam Stand 1-Riser Backstage Equipment Steadicam Stand 8" Wheel Kit Backstage Equipment Steadicam Stand Utility Tray Tenba 38" Rolling Grip Case

Hello, So today I am selling my very dear-to-me PRO I sled, which has been modified (by Terry West, I believe) to be a very excellent and affordable sled for anyone who is looking to get into Steadicam and purchase their first "big rig" setup. This sled was used by me for 2+ years and by another Forum member. You can fly anything from REDs to 435's with this baby. I upgraded the gimbal to a PRO VZ with a short handle (previously owned by a renowned PRO tech, and previously previously by some former Industry big wigs), which has made a tremendous difference in performance. Here are the details: • GPI PRO I Telescoping Post (Only 1 Hill Gorelock Docking Ring is shown in photo, but should include 2x for high- and low-mode docking) • PRO I HD-Upgraded Electronics (HD-Converted) • PRO DB II Top Stage w/ Diving Board MDR Attachment • Extra screws/AKS • GPI PRO VZ Gimbal Grip w/ Short Handle • Custom Bottom Stage (12/24V Compatible) w/ 3x Gold Mount Battery Mounts • XCS Monitor Bracket/Rods w/ Cam-Jam 1.5" Spacers (MONITOR AND YOKE ARE NOT INCLUDED UNLESS DESIRED (we'll discuss) • Pelican 1615 Air Case (I may have extra cables, and a plate, however, just reach out to me and we'll see what we can work out. I have connections to a few different professional cable manufacturers if needed) Photos of the rig below, plus one of it in play. Looking to get somewhere in the realm of $10,500, but offer up. If interested please DM me, or reach out to me at lorenpaulhamilton@gmail.com or call/text (805) 320-1845 Thanks for looking!

Excellent condition, as pictured. 34-40" $5000

Now when many friends out there change to the Volt, are there any PRO gimbals for sale? I’m looking for a newer and/or in good condition PRO gimbal with the clamp grip. Don’t need the VZ thing (.. or you have to convince me). Please send me a private message including photos of your gimbal. All the best, TOMAS