Search the Community

Like titles says, looking for the 4" drop down for GPI Pro (goofy side) Also looking for a monitor bracket for Artemis (1.5") Thanks!!!!

For Sale: Transvideo CineMonitorHD6 X-SBL Removable A/B plate Power cable for GPI PRO sled GPI PRO Telescoping monitor bracket All parts are very lightly used, like-new. No scratches, or signs of wear. Local pickup in Los Angeles or shipping at buyer's expense. $5500/obo

Hello Everyone, I am selling my spare GPI Pro Gimbal, S/N 545 (this is the serial number for the gimbal itself that was printed on the original-style yoke which has since been sold separately; the new gimbal yoke S/N is 642x). For 1.5” center posts. Included in the sale is: Standard Pro Gimbal Grip with Clamp Short Pro Handle XCS Ergo Handle (Regular) Gimbal Wrench Spare Pan Bearing The Gimbal is in working order (last serviced by Jack Bridges on 8/18/2020 and the gimbal has barely been used since its last service). The yoke has been upgraded to the newer version, which is thicker and more robust. There’s normal wear and tear throughout. The gimbal cap has some marks from what appears to be concrete (not sure where these scratches came from as it occurred when the gimbal was out of my possession, however any issues that resulted from the damage have since been addressed). Asking $3,800 OBO plus shipping (gimbal is available for pick-up in Los Angeles) Contact info: aaron.gantt@gmail.com Aaron

What do you use for your low-mode monitor? I'm flying a GPI kit and have been balancing with the Small HD 702 as my low-mode monitor in order for quick high/low transitions. I love having it there because it really does make things faster. But the 702 is abysmal in direct sunlight, and is too clunky to be practical. And also powering the dang thing via d-tap is an issue. I'm looking into the BlackMagic 5in Video Assist as a budget option, and a Transvideo Starlite 5in as a more permanent solution. A monitor that supports on board video recording is not strictly necessary, but I'm definitely leaning towards a monitor that supports that feature. The BlackMagic 5in seems alright but you have to do some surgery in order to power it properly from your sled. Any thoughts or tips on the matter would be much appreciated! Cheers, -Dan

Selling my entire GPI PRO rig. Unfortunately, chronic back issues have stood in the way of this being a long-term career option for me, so it's time for it to go. CineLive sled (minus topstage) was purchased used in 2019 from a NYC-based operator (first owner, Calvin Falk) and serviced by Jack about 6 months later; vest and arm both purchased new in 2019; upgraded to new Betz stage in late 2019. I have never rented the equipment out to any other operator. You'll find the typical scuffs, etc., but overall everything is in pretty good cosmetic condition (the vest is especially clean). And more importantly, everything is in fully-functional condition, has been well taken care of, and is 100% ready to shoot. All signal and power cables for most camera types are included and detailed below. For now, I'm selling the equipment as a FULL PACKAGE ONLY. The rig is currently located in Seattle, WA. I'd prefer a local pickup, but will consider shipping within the United States at buyer's expense (shipping + full insurance + PayPal fees). $45,000 OBO SEE PHOTOS HERE: https://imgur.com/a/mtxoOkW I'm happy to answer any questions via DM, email, or text. ph: 509-470-0293 email: samsrice@gmail.com Thanks for looking! SLED: PRO Center Post Telescoping PRO Gimbal Gen IV Battery Rack PRO CineLive Upper/Lower Junction Boxes Boland BVB07 Monitor CamJam Quattro II monitor arm with integrated yoke Betz Tools Top Stage + aks: universal dovetail plate Sony & Amira V-Mount snap plate Alexa/LF/Plus/XT adapter Tripodlokplate (SOS plate) dovetail-mounted rod bracket w/ extra rods (chrome) rods for stage-mounting rods (blue) Transvideo Starlite monitor (low-mode monitor): PRO-Starlite power cable Cam-Jam mounting bracket felt bag Hill Docking Bracket Camera power cables + bag: 24V ARRI angled 24V ARRI straight 12V ARRI straight 12V XLR RED DSMC2 24V Panavision Misc cables: p-tap power cable for Boland Rencher p-tap breakout (PRO to p-tap) PRO sled tools Pelican iM2950 Storm Case w/ custom-cut foam & Harrison Lid Organizer ARM ($19,270 total new): GPI PRO Titan Arm 4 x blue canisters 2 x black canisters PRO J-Bracket (low-mode bracket) 6" arm post 10" arm post Titan arm tools PRO arm bag PRO 4-slot canister soft-shell carrier (not pictured) VEST ($5,720 total new; no case included—I've always used a duffel bag): PRO Vest Pro Vest tools and misc spare screws BATTERIES ($4,266 total new): 5 x Core SWX Hypercore 150A gold-mount batteries 1 x Core SWX Fleet Rapid Li-Ion gold-mount charger 1 x Core SWX Fleet Q4Ai gold-mount charger Pelican iM2700 Storm Case w/ custom-cut foam for 8 batts, 2 chargers, 4 spare arm canisters MISC. ACCESSORIES: Bag of thin BNC cables (misc lengths, pictured), HDMI cable, and BNC adapters/splitters Bag of camera/AKS screws (pictured) Bondhus 1/4", 5/32", & 1/8" T-handle hex tools Ratworks Gold-Mount cheese plate Cam-Jam mounting AKS ($377 total new including Starlite bracket): Teradek Bolt through hole mount Teradek 15mm rod mount Teradek mounting bracket (L-bracket) 3 x SmallHD misc mounts (for unique mounting situations) Hill ARRI EVF top-mount bracket Harrison Standby Cover Manfrotto short dovetail for DSLRs STAND: Backstage Equipment Steadicam Stand 1-Riser Backstage Equipment Steadicam Stand 8" Wheel Kit Backstage Equipment Steadicam Stand Utility Tray Tenba 38" Rolling Grip Case

Bought this arm off of Matt Petrosky who is a great operator out in Atlanta. It was a back up arm and was hardly used. It’s a amazing arm and flys smooth like butter.. Package comes with: -6in, 12in Post -Original Bag w/ Tools -x2 Blue Canisters / x2 Black Canisters -Titan Arm The price is $15,500 OBO I’m selling cause I don’t need an arm this powerful for the work that I do. I’m based out in Los Angeles if you want to meet up!

Selling my GPI Pro package because I'm moving on from Steadicam. I'd like to sell this package as one full kit (perfect for somebody looking to get an all-in-one package). The rig is barely used, by which I mean only a few days on set. It's been sitting in the Pelicans since Covid began. Buyer pays shipping and taxes. I'm located in Los Angeles, and would LOVE to keep things local if I can. $42,000 OBO GPI Pro Arm (Titan)--sole owner, bought 8.2018. Very light cosmetic damage. Includes 4 blue canisters, 2 black canisters, canister soft case, arm soft case, original 6" post, and rain covers. GPI Pro Vest--sole owner, bought 8.2018. Very light cosmetic damage. Comes with GPI Pro color coded Bondhus 5/32 T-Handle. I'm 6' 220lbs and it fits great. Completely adjustable. GPI Pro Sled--sole owner, bought 8.2018. Very light cosmetic damage. Includes center post (telescoping), DBII, CineLive upper junction box, CineLive lower junction box, gimble handle w/ clamp, HD center post cable, Gen IV battery rack, telescoping monitor mount, MDR Bracket: Preston 2. Gerry Hill bracket and Gorelock 2 Large Docking Rings--sole owner, bought 9.2019. 6" CinemonitorHD Classic SuperBright (1200 Nits)--bought used (floor model) 10.2018. Includes GPI Pro monitor mount, power cables, and a few BNCs. 9" (3/8-16) vertical displacement camera plate Arri UAP-1 camera plate 2x Pelican 1650 cases (heavily used) with foam already custom cut (by me, not laser cut). Ready to ship in cases. Low Mode F Bracket Wrap Grip Bondhus T-Handles 5/32 (x2), 1/8, 1/4 Stubby Screwdriver GPI Pro repair tools and extra nuts/bolts. Steadicam Operator's Handbook

Now when many friends out there change to the Volt, are there any PRO gimbals for sale? I’m looking for a newer and/or in good condition PRO gimbal with the clamp grip. Don’t need the VZ thing (.. or you have to convince me). Please send me a private message including photos of your gimbal. All the best, TOMAS

Selling my GPI Pro Titan Arm with 4 Canisters (2 blue and 2 Black) with all its original accessories plus 3 Arm Posts and Rain Cover) Selling also my Tiffen Exovest, (Complete with Bag, 2 extra shoulder pads). They were bought new in 2016, perfect conditions, normally use. Located in Italy (Rome) Selling together €15.000 -------------------------------------- Tiffen Exovest €4.200 GPI Pro Titan € 12.000 ------------------------------------- Buyer pays for shipping and all fees (PayPal fee included) Thank you. Emanuele Chiari Mobile +39 335 5353335 Web emanuelechiari.net

For sale 2 x black Pro arm Canisters. Unused. Part of an Pro arm insurance replacement package so these are surplus to requirements. based in london, UK. Happy to ship worldwide at buyers expense. £3000 + vat. + shipping. Thanks

Hello all! I've been having some interest in buying a Betz universal steadicam plate but wanted to hear what other ops have as their go-to camera plate for the typical builds (Alexa Mini, Red, Blackmagic and so on)? Primarily been using my PRO Arri/Pana plate on my DB2. Thank you all for any input/advice on this matter! Hope you all stay safe and may your face shields stay fog-less ha, Joe

Klassen Ibaird 4” Right Sided (regular) drop down for Gpi Pro vest for sale. Get your socket block 4” lower. Used only a handful of times- essentially new condition. Located in LA. SOLD

Selling my pro vest along with the flowcine xdrop (performs the same function as an iBaird, only you don’t have to switch over the socket block receiver from your pro vest). The vest has treated me well over the 5+ years that I’ve had it. There is some cosmetic wear and tear. I’m 6’0’ with a long torso, Chest is about 38” and waist is 34” based on the Pro sizing chart. The xdrop is in perfect like-new condition. I only used it once or twice if that. It works great, but I bought it thinking that I would switch back and forth between my pro vest and Klassen back-mounted harness and wanted the extra reach for my pro. Had an iBaird before but didn’t like the time it took to take it off without purchasing an additional socket block receiver. Asking $4600 OBO for the vest $475 OBO for the xdrop. $5000 OBO for both. Buyer pays shipping. Thanks, Joe

In search of a well used titan pro arm or a well priced G70x arm. Doesn’t need to be the cleanest, just needs to function well. Please email me at rjpcamera@gmail.com

GPI Pro Titan Arm w/4 Black Canisters in like-new condition. Well kept and maintained. Located in Los Angeles for local pickup only. Thanks for you interest. Asking $17,500

GPI Pro Fixed Monitor Arm w/Clamp and 3" Extension Priced at: $950.00 Low Mode Bracket Priced at: $150.00 Please text if interested: 760-505-7011

I’m looking to buy a PRO sled and either the Titan or Atlas arm. If you got something for sale let me know

PRO DB2 plus extras Comes with; -9" Pro camera plate - Pro Follow Focus Bracket Dovetail -XCS Preston MDR 2 Bracket -4 x Mounting Bolts Used but in very good condition. Serviced by Optical Support London in September last year. No vibrations, all in very good working order. Perfect for someone building there first rig. Located in the UK. Will ship anywhere, buyer pays. Prices is £1580 plus vat. tomwilliams@me.com

WTB Pro Gimbal tool, based in Chicago and will pay shipping!

What’s up everyone?! I’m looking to purchase a previously owned complete GPI pro kit, if there is one out there... please reply with any information that may lead in that direction! Thanks in advance!

Brand new PRO vest for sale, light scratches on the front at the bottom. chest 42 , waist 32, I am 5'10" tall. Spare screw kit / T-handles included. Asking $5,500, Los Angeles local sale only.

WTB: I´m looking for an used GPI PRO gimbal grip 1,5" (like GPI PRO or MK-V tools free upgrade) like the pictures attached... Looking for a good deal nothing fanci, can have marks of usase as long as it works. steadikam@gmail.com

Looking to buy a GPI Pro sled in europe vio.federico@gmail.com

I selling my Gpi Pro Arm with 2 Blue and 4 Black Canisters, the Arm and canisters working perfectly and are in a very good condition see the photos. Price 12,900,- EUR or 14,700,-$ I accept only PayPal Contact: info@lm-photography.me Thank You Leon

TWO GPI PRO BLUE CANISTERS. In Excellent Working and Cosmetic Condition. With PRO Canister Bag. Asking: $2400 each. Please PM or Text: JeffZach@mac.com. 760-505-7011 Thank you.