Search the Community
Showing results for tags 'master series'.
-
I am currently starting a show with the DXL2. I have a Master Series, and am having trouble lining up the camera plate to the body. The only way I was able to mount it was with the bridge plate (pic bellow). While the sled flies well, it would be GREAT to be able to ditch the BP and go right to the camera. As it's making my sled quite long. Any advice as too where I could get a camera plate that would fit a Master (obviously different than the original plate) would be greatly appreciated. Thank you.
-
Hi friends. Im selling my Tiffin Master Series sled, arm and vest. All three items are in great condition. I take good care of my equipment. My arm was just serviced my Robert Luna. The sled has also been upgraded too HD. $12,000 obo email me at kyleisauer@gmail.com Sled- Master series sled. The sled has been upgraded with a HD line and HD monitor. I currently run a Small HD 7” Hight Bright monitor with a gold mount backing. Comes with… -Sled W/ universal camera plate -Case -7” Small HD HB Monitor -Docking bracket -Stand -Water proof bag Arm- Master series arm. Arm was just serviced by Robert Luna here in LA. Some cosmetic scratches on the paint, but everything is all functional. Comes with… -Arm -Soft pad case -High and low post -F bracket for low mode -Pro Post “To fly Pro sled” -Water and Dust arm sleeves Vest- Master series vest. Vest shows normal wear. Very comfortable and well taken care of. Comes with one red T handle for the vest socket block. Accessories- 2x Hiroshi to P-tap break out boxes for accessory power. 2x 2pin lemo short cables. HD-SDI downconverter w/ Power cables. 4x Anton Bauer Hytron batteries and 3x Gold mount style batteries with a two bank charger. I will also include other random items as well. All gear is carried and stored in pelican cases.
-
Master Series Vest for Sale
Beau Conner Bellanich posted a topic in Steadicam Marketplace - For Sale
Used Vest, just like all Master Series vest are now it comes with minor cosmetic wears and blemishes, small tear on the left waist. It was always comfortable and great to start with or have as a back up vest. DM me for pricing!- 1 reply
-
- 1
-
- vest
- master series
-
(and 7 more)
Tagged with:
-
Hi All, selling my Master Series Arm. Recently serviced by MKV in Manchester, previously by Optical support, London. Sale includes soft bag and master arm post. Few nicks and bumps as you may expect from an arm of this age, but in solid working order. Pics show covers off also for those who want a look at the springs and cable. Asking £4750k Ono plus VAT. The arm will be at 3 Mills Studios, London. for the next 3 weeks if anyone want to come and have a play or take a look. Cheers, Dan. Images@ https://www.icloud.com/sharedalbum/#B10J0DiRHXySgZ
- 8 replies
-
- Steadicam
- Master Series
-
(and 3 more)
Tagged with:
-
Hi Folks, Up FOR SALE is a complete Steadicam Master Series Package, Inc: 1 - Master Series Sled with MK-V bottom stage rebuild, HD Line through the sled and 12v/24v Power, Transvideo HD6 monitor 2 - Master Series Arm - Recently Reconditioned by Robert Luna in the USA 3 - Master Series Vest 4 - HP Video HD Transmitter 5 - 10 x IDX HL9s V-lock Batteries w/ 4 way Charger 6 - Preston MDR1/HU1 w/ 2 DM1 Motors 7 - Hardmount w/ Moy plate 8 - Matthews Stand,Jerry Hill Dock, Low Mode Bracket, Rain Covers/Hood, Other accesories This was my first Steadicam and allowed me to learn and work as an operator on small Music Clips, Corporate Vids, Short films and move on to larger TVC's, Television Series and Feature films. I see this package as a great way for someone to start as an operator. Learning and working towards bigger and better jobs. For this reason I'd like to keep it all together, however I can separate the kit if it gets it moving. Below is a more detailed description of each part and individual prices as well as pics. I'll try to list everything in as much detail as possible. It's priced to sell, but I hope its clear that this equipment was well looked after and cared for. Please contact me with any questions. Cheers! Jonathan Tyler jt@jonathantyler.co +61417428880 Sydney Australia Total Package Price $18,800 USD (+GST if sold in Australia) Shipping at buyers expense 1 - Master Series Sled with MK-V bottom stage rebuild, HD Line through the sled and 12v/24v Power, Transvideo HD6 monitor - 3 vlock battery plate - 1 large camera plate - Inc's 2 BNC Cables - Flight case $4000 USD (+GST if sold in Australia) 2 - Master Series Arm - Recently Reconditioned by Robert Luna in the USA - long and short post - Carry bag $6000 USD (+GST if sold in Australia) 3 - Master Series Vest - Carry Bag - Spare Clips included $1500 USD (+GST if sold in Australia) 4 - HP Video HD Transmitter - Inc Dtap, Hirose, 4pin lemo and XLR Transmitter power - V-lock and AC power for Reciever - Various Spare antenna - Pelican 1620 Case $1000 USD (+GST if sold in Australia) 5 - 10 x IDX HL9s V-lock Batteries w/ 4 way Charger - Pelican 1550 case $4000 USD (+GST if sold in Australia) 6 - Preston MDR1/HU1 w/ 2 DM1 Motors - MicroForce, Wired Iris Control w/ cable - 4 motor cables, Arri Roll Cable, Red Roll Cable (few more old ones) - Various marking rings, brackets - Spare Arials - 3 Re-celled batteries w/ fast charger - 12/24v XLR power, 2 pin lemo power (from sled) - Flight case $2000 USD (+GST if sold in Australia) 7 - Hardmount w/ Moy plate - Soft case $300 USD (+GST if sold in Australia) 8 - Matthews Stand,Jerry Hill Dock, Low Mode Bracket, Rain Covers/Hood, Other accesories - No price on this stuff as most of it goes with the sled.Or I'll negotiate as offers arrive
- 1 reply
-
- Steadicam
- Master Series
- (and 7 more)
-
Selling my Ultra II vest, IIIA arm and Master Series sled. IIIA Arm was serviced by Robert Luna 3 years ago. I have a new post from Luna to fit the master series sled as well. Arm comes with rain cover for both sections. Arm is in great condition. Vest is in good condition. There is a crack on the front plastic but that doesn't affect its operation at all. Comes in a Steadicam vest bag. Sled is an HD upgraded sled with AB battery plates. It has a cam jam monitor yoke on it with spacers for a SmallHD DP7. Comes with a bunch of accessories and a hard case. Willing to split items up. Price breakdown is as follows: Ultra II Vest: $2k IIIA Arm: $5k Cam Jam Monitor Yoke: $1k Master Series Sled (with docking bracket and a bunch of accessories): $5k Photos are here: https://drive.google.com/drive/folders/0B9ipbzgN2fQSLUF2TllFM0xXRzA?usp=sharing
- 1 reply
-
- for sale
- master series
-
(and 6 more)
Tagged with:
-
[Complete Steadicam System] This system is now in LA, so LA-locals come see it. The time has come for me to part ways with my starter steadicam rig! I bought the system about 2.5 years ago and it has done me well. The arm was recently serviced by Tiffen. The sled recently serviced electronically and mechanically by Terry West and Robert Luna so it is up to specs! This is a fantastic starter package for someone looking to get started with a pro rig. Sled, monitor yoke, dock, and various bits and pieces come in a standard production hard case. Included is a universal mounting plate. The sled is all upgraded internal HD and 24/12v internal power wiring. There's also an analog BNC and HD BNC that runs through the system. 2 Anton Bauer battery mounts have been added as an upgrade to the sled for power. Cam jam monitor arm with yoke is a must have. Has greatly helped with my rig balancing and switching back and forth from low mode. You simply just flip the monitor and it doesn't change anything with the rig's balance. The yoke fits pretty much any monitor you'd want to put on it, but additional spacers may be required to fit the different monitors out there. I have spacers for a SmallHD DP7 that I will include. You might be thinking that the Master Series sled doesn't fit onto the IIIA arm, and you are right! Luckily I got a new post from Robert Luna that makes the 2 compatible. Works flawlessly. Ultra II vest shows some signs of regular use, but is still in great working condition. Safety release works perfectly, socket block is undamaged. Bartech analog unit has been fantastic. Includes a hand unit, receiver, motor, and various power cables, motor cable, etc. Anton Bauer LP2 Dual Gold Mount charger with 2 HC Dionic AB batteries. Both were recently sent back to Anton Bauer to get re-celled. The batteries are in perfect working order. See below for a list of what's included. There are a few things I didn't talk about here. Included: -Master Series upgraded HD sled -Docking bracket -Low mode bracket -Camjam monitor arm with yoke -Various BNC cables, tools, miscellaneous bits and pieces -Hard case for the sled, docking bracket, cam jam monitor arm and yoke -CP IIIA arm -Allen wrench for adjusting the arm tension -Rain cover for the arm -Master Series sled compatible post for IIIA arm -Long post -Bag for the arm -Ultra II vest with socket block (can be switched to either side of the vest) -Soft bag for carrying the vest, arm, rain cover, and Mitchell hard mount -Mitchell hard mount -Bartech analog wireless follow focus receiver -Bartech hand unit -Wireless follow focus motor -15mm rail adaptor for motor -Power and motor cables for Bartech -Bartech system carrying case -Anton Bauer LP2 dual gold mount charger w/power cable -2 HC Dionic AB batteries Total is $20,400 This is practically everything you need in order to get operating. It would also make for a decent back-up rig. Please contact me if you have any questions. Buyer pays shipping costs, PayPal (or any other money transfer) fees. I'd prefer to do this over PayPal. Bill of sale will be sent to buyer. If you refer someone else (who actually ends up buying the system, that is) I am willing to pay you $300. So please refer! All pictures are of my equipment. No stock photos or anyone else's gear other than mine pictured. PHOTOS ARE HERE (It wouldn't allow me to upload the photos here): https://www.flickr.com/gp/109620316@N05/5o0P4M
- 1 reply
-
- master series
- sled
-
(and 3 more)
Tagged with:
-
[Complete Steadicam System] The time has come for me to part ways with my starter steadicam rig! I bought the system about 2.5 years ago and it has done me well. The arm was recently serviced by Tiffen. The sled recently serviced electronically and mechanically by Terry West and Robert Luna so it is up to specs! This is a fantastic starter package for someone looking to get started with a pro rig. Sled, monitor yoke, dock, and various bits and pieces come in a standard production hard case. Included is a universal mounting plate. The sled is all upgraded internal HD and 24/12v internal power wiring. There's also an analog BNC and HD BNC that runs through the system. 2 Anton Bauer battery mounts have been added as an upgrade to the sled for power. Cam jam monitor arm with yoke is a must have. Has greatly helped with my rig balancing and switching back and forth from low mode. You simply just flip the monitor and it doesn't change anything with the rig's balance. The yoke fits pretty much any monitor you'd want to put on it, but additional spacers may be required to fit the different monitors out there. I have spacers for a SmallHD DP7 that I will include. Most will say the Master Series sled doesn't fit onto the IIIA arm, and you are right! Luckily I got a new post from Robert Luna that makes the 2 compatible. Works flawlessly. Ultra II vest shows some signs of regular use, but is still in great working condition. Safety release works perfectly, socket block is undamaged. Bartech analog unit has been fantastic. Includes a hand unit, receiver, motor, and various power cables, motor cable, etc. Anton Bauer LP2 Dual Gold Mount charger with 2 HC Dionic AB batteries. Both were recently sent back to Anton Bauer to get re-celled. The batteries are in perfect working order. See below for a list of what's included. There are a few things I didn't talk about here. Included: -Master Series upgraded HD sled -Docking bracket -Low mode bracket -Camjam monitor arm with yoke -Various BNC cables, tools, miscellaneous bits and pieces -Hard case for the sled, docking bracket, cam jam monitor arm and yoke -CP IIIA arm -Allen wrench for adjusting the arm tension -Rain cover for the arm -Master Series sled compatible post for IIIA arm -Long post -Bag for the arm -Ultra II vest with socket block (can be switched to either side of the vest) -Soft bag for carrying the vest, arm, rain cover, and Mitchell hard mount -Mitchell hard mount -Bartech analog wireless follow focus receiver -Bartech hand unit -Wireless follow focus motor -15mm rail adaptor for motor -Power and motor cables for Bartech -Bartech system carrying case -Anton Bauer LP2 dual gold mount charger w/power cable -2 HC Dionic AB batteries Total is $24,400 This is practically everything you need in order to get operating. It's also a fantastic back-up rig. Please contact me if you have any questions. Buyer pays shipping costs, PayPal (or any other money transfer) fees. I'd prefer to do this over PayPal. Bill of sale will be sent to buyer. If you refer someone else (who actually ends up buying the system, that is) I am willing to pay you $300. So please refer! All pictures are of my equipment. No stock photos or anyone else's gear other than mine pictured. Photos (including photos of the Bartech): https://flic.kr/s/aHskR4sU77
- 8 replies
-
- steadicam
- master series
-
(and 8 more)
Tagged with:
-
Selling my modified Master Series Sled. HD-SDI line down the post (Terry West) V-mount battery plate Ultra Gimbal clamp Cam-Jam Quattro Monitor arm with mounting kit for Transvideo HD6 (no monitor) Flight Case Gorelock 2 collar $5000 obo Available for inspection in Los Angeles Thanks Kenny
- 6 replies
-
- Master Series
- Sled
-
(and 3 more)
Tagged with:
-
If I have a master series post can I remove/cut off the bottom electronics and clamp on or add-on a new bottom with new electronics? To upgrade it to HD. Along with new top box. Or is there an easier way to do this.
- 1 reply
-
- Master Series
- Tiffen
-
(and 2 more)
Tagged with:
-
-
I have a Master Series Arm that is in really good condition, just wondering what maintenance routine other users have to keep their arms in the best possible shape? Marty
-
Hello All! I fly a Master Series rig and I am looking for a J-Bracket to use on a shoot this sunday. If anyone in LA has one I could rent or for sale please let me know ASAP! Thank you! And I am sorry if this is in the wrong place on the forum I am in rush to find one.
-
For Sale my original Master Series Steadicam Vest. Yes, it's old. Yes, it needs TLC But, if your just starting out and need a good vest, and don't mind putting some work into things, this is a good choice. It needs a socket block and some creative work on the webbing. Years ago I replaced the leather with plastic and webbing to make it lighter and quieter. Padding is good I'm asking $1000 obo Mike 818-207-8156
-
A while back I asked a question about what would be a good downconverter to use for a RED Epic and got fantastic advice. After saving some money I am able to finally buy one. The problem that I am having is powering the downconverter through my Master Series Sled. I have been looking into the AJA HA5, Decimator 2, and the BlackMagic Design Decimator. Reviews on each one tell me to go to the other so I am running in circles. Also I do not know what connectors and voltage I should be using to power the downconverters to my sled. Is there a way to have them power from the camera as an alternative?