Search the Community
Showing results for tags 'monitor yoke'.
-
The two tiffen docking brackets are very used. One is still extremely reliable the other is broken on one side so the pin doesn't lock. I used it for a while like this with no issues. I'll let them go for whatever the best offer is out there. There are two docking rings included for a 1.685" post which is usually the under post of a master or ultra series sled (I know super useful...come and get it). The Transvideo 8" CineMonitor Yoke is for 16mm rods 89mm apart. This is for most Tiffen sleds the ones i know of for sure are the master and ultra series. I bought it for over 300$ so ideally I'm looking for around 200$ but I'll take the highest offer (screws included). Lastly the Magliner vest holder I bought about a month ago but I decided to go for a different solution (screws included). This one I am selling for 120$ Based in Los Angeles Let me know if you have any questions. PXL_20220623_182859538.MP
- 3 replies
-
- transvideo cinemonitor
- vest holder magliner cart
- (and 3 more)
-
Hi everyone I'm selling my Cam-Jam Quattro Monitor Bracket. It's in pretty good condition. Only couple of minor scratches, but perfectly working. I had used it on the outer post of a Betz RIG for a Transvideo 6" X-SBL. I'm asking 800 EUR € For inquiries please e-mail me at: info@ozzyoksuz.com Cam-Jam Quattro Monitor Bracket for Transvideo 6” 1.Quattro Monitor Bracket 2.Reduction Ring (for Betz RIG outer post) 3.All mounting screws and adaptors for transvideo 6” x-sbl included Shipping within EU preferred, Buyer pays for shipping and upcoming money transfer fees Cheers
- 3 replies
-
- cam-jam
- monitor yoke
-
(and 1 more)
Tagged with:
-
Selling my Ultra II vest, IIIA arm and Master Series sled. IIIA Arm was serviced by Robert Luna 3 years ago. I have a new post from Luna to fit the master series sled as well. Arm comes with rain cover for both sections. Arm is in great condition. Vest is in good condition. There is a crack on the front plastic but that doesn't affect its operation at all. Comes in a Steadicam vest bag. Sled is an HD upgraded sled with AB battery plates. It has a cam jam monitor yoke on it with spacers for a SmallHD DP7. Comes with a bunch of accessories and a hard case. Willing to split items up. Price breakdown is as follows: Ultra II Vest: $2k IIIA Arm: $5k Cam Jam Monitor Yoke: $1k Master Series Sled (with docking bracket and a bunch of accessories): $5k Photos are here: https://drive.google.com/drive/folders/0B9ipbzgN2fQSLUF2TllFM0xXRzA?usp=sharing
- 1 reply
-
- for sale
- master series
-
(and 6 more)
Tagged with:
-
Selling my Cam Jam monitor yoke and sled bracket. I have a collar that fits to the master series post. I also have spacers for the SmallHD DP7. Yoke will fit the 8" Transvideo Fits with Transvideo HD6 and HD8, Stargate FHD 7 , RainbowHD SBL 7, Cinetronic GEN1 / GEN2, SmallHD 703, SmallHD DP7-HB 703 and 702, Boland BVB07, Marshall V-LCD70XP / XHB and STX651, Nebtek Solar HD7SC and TV Logic. Asking $1k. Photo: https://drive.google.com/drive/folders/0B9ipbzgN2fQSeHNlVUlBZE0xZUk?usp=sharing
- 1 reply
-
- cam jam
- monitor yoke
-
(and 3 more)
Tagged with:
-
Hi Guys I'm not too satisfied with my actual mounting. Is there a monitor yoke for the mentioned monitor? Couldn't find a specific one for the SmallHD monitor and I'm not sure if the Transvideo yoke for Rainbow 7'' would fit although the SmallHD is also 7''. Very grateful for any help. Thanks and all the best from cheese country ;) Andreas
- 4 replies
-
- monitor yoke
- MK-V
-
(and 1 more)
Tagged with:
-
FOR SALE: PRO monitor arm $1200 Cinetronic yoke (also works with Marshall) $300 Marshall V-LCD70MD-3G 7" (SDI & HDMI in/out) including TERRY WEST handmade 18" 8-pin PRO power cable $700 Everything is rock solid and works flawlessly although the 1/4-20 on the south side of the Marshall monitor is busted (which was fine with me as it was obsolete for this yoke). This package is the best quality you can get for the price IMHO. The monitor is also surprisingly very sharp and bright. With the sunhood on in the brightest conditions you are good to go. Located in Los Angeles for local pickup for ship worldwide, buyer pays shipping. Please email me at pcombesk@gmail.com with questions or more pictures. Thanks! Pascal
- 2 replies
-
- pro monitor arm
- monitor yoke
-
(and 5 more)
Tagged with:
-
Cinetronic Gen 1 monitor yoke with spud. $75 obo
- 1 reply
-
- cinetronic
- gen 1
-
(and 2 more)
Tagged with: