Search the Community

Hi All, Does anyone have a Pro bayonet mount and ring for a Pro Gen 2 upper? Looking to buy one if you have it laying around. Let me know! Thanks Beau

I have been using a first generation Flyer and have finally outgrown it! I'm looking to buy a full-sized, hopefully turn key rig for a few upcoming projects and the future beyond that. I am open to a variety of set ups. Ideally I would move into an ultra 2 or pro rig as I have some experience with these. I am located in Northern California but would be willing to travel a reasonable distance to vet something that looks promising. Feel free to contact me with any questions... Thanks! Luke S. lukesauer@gmail.com

Looking for a GPI PRO Gen 2 or 3 lower electronic box. Must be HD and have bayonet mount. I do not need the battery hanger or jumper blocks. Cheers!

Hi yall When we flip the CineLive into 24v for using ARRI and other cameras, do the upper electronic switch out to 24v exclusively? I am having cables made for a Chrosziel MagNum receiver and am wondering if I need a 12v and 24v cable, or 12v only. The receiver does not care whether it receives 12v or 24v, it will push voltage independent of whats coming in. Try as I might, I have a difficult time understanding electricity. brett.

Cleaning out a lot of gear that has accumulated, and will add more items and pictures to the list in the coming days ! Tiffen Steadicam Zephyr, V-lock mounted with Small HD AC7 monitor. In used but well maintained condition € 6.500,00 PRO Lite base, upgraded with Pro 2 connector. Works with the post below, but should € 2.000,00 be rewired for other purposes PRO centrepost type 1 with upper J-box and Pro2 lower bayonet mount € 300,00 PRO D-Box 2 with tool-free conversion & receiver mount. € 1.200,00 Used in good working condition PRO monitor arm € 250,00 PRO F-bracket € 100,00 PRO Docking bracket w. 1 docking ring € 200,00 PRO gimbal housing - for parts or project, make an offer PRO 2 lower electronics module - for parts or project, make an offer CP 3A gimbal in good working condition with PRO wrap-grip € 1.000,00 Preston gimbal microforce in pristine condition w. cables € 1.800,00 Jerry Hill hardmount with all bolts, Blue anodized with U-bolts included, New ! € 700,00 Optex LoMode bracket for Sony DVW 790/900 cameras. Used only a few times and can possibly be adapted to other cameras € 200,00 P.E. Denz sliding baseplate in very good condition, bottom profile fits O’Connor € 250,00 Bartech analog single channel system w. Hedén M28VP and a very complete set of cables and aks, including rod mounting system, Gimbal mount hard wire module and fitted case € 3.000,00 Arri LMB-4 6”x6” clip-on mattebox in clean condition € 700,00 Everything is located in Copenhagen, Denmark and i will ship worldwide - please feel free to call or email me if you have questions

Hi guys,im looking for Pro sled to buy, Pls let me know if anyone is looking to sell,thanks

Hello everyone interested in buying complete rig. If possible: sled 2"(MK-V, XCS, Pro 1,5"), Betz tools top stage, Pro Arm, WK or Pro vest, Follow Focus kit, HD transmiter kit... Open to offers

GPI-Pro II rig for sale, including: - PRO II SD Sled: DBox + JBox + SD Telescopic Centerpost + Pro guimbal + Battery Rack + original monitor arm + Recorder mount + plate - SteadiRig Arm ( up to 63 pounds ) . - Pro Vest - Super post. To super high mode or super low mode. - Kit follow focus: Bartech with m-one motor. Kit of brackets, rings, cables, etc. - 3 gold mount batteries and twin charger. - Monitor. Transvideo Cinemonitor II SD. With bubble level - Wireless video transmiter PAL Teletest. - 2 T handle allen wrench (guimbal and arm) - Tools and spares. - Cables: 2 monitor cable ( power and video from the lower box ), AUX PWR ( lemo 2-pin to XLR4 upper box ), 2xCAM PWR (lemo 3-pin to xlr4 upper box ), Power tap to xlr4 ( from baterrie power out ), 2 BNC, and more xlr4 power cables… - Cases: 1 small peli case for follow focus kit. 1 1650 peli case for arm and vest, 1 anvil case for sled all of them with foams and handmade inlays - Docking bracket - tripod This a complete kit ready to go and it’s in very good conditions and never was rented. We do worldwide shipping. If you are interested we can do an sled upgrade from sd to hd, but this upgrade is not included with the price. Price is 29500 € or best offer. Tax and shipment are not included. We are based in Barcelona, Spain. Please feel free to call or email with any questions or offers. Mail. carlos@rocksteady.es alex@rocksteady.es tlf. 0034 659536694

Hi All, Looking for a DB2 or equivalent, if you have a spare one laying around. Let me know if you do! Thanks! Beau

(2) SD Upper J boxes (1) SD Lower J box (1) Telescoping Center post WITH SD center post cable. (1) 9" Pro camera plate (2) 7" Pro camera plates $3000 takes it all. Offers welcome too. Willing to separate, PM for individual prices.

Hi there, I am looking for 2 black arm canisters for PRO Titan arm. Best Thomas

WTB: 1: Pro Sled Telescoping post 2: CRT monitor or HD monitor 3: batts 4: Pro arm 4 blues and 4 blacks 5: All cables for MDR, arri, pana and etc 6: Pro Vest Looking for a complete used Pro package... Thanks..

PRO vest pads, not exactly sure how to measure them in relation to sizing for an operator. waist size seems straight forward but unsure about the chest and how wide the vest skeleton chest width is. PM me with any questions. Chest pad is 31" across. Waist pad is 37" across.

Yet again, I have another socket block to get rid of. Genuine PRO female socket block that came with my PRO vest, but of course will not fit my Tiffen arm able socket block. So looking to trade for a Tiffen socket block or sell. Cosmetically 9.5/10

FOR SALE: PRO monitor arm $1200 Cinetronic yoke (also works with Marshall) $300 Marshall V-LCD70MD-3G 7" (SDI & HDMI in/out) including TERRY WEST handmade 18" 8-pin PRO power cable $700 Everything is rock solid and works flawlessly although the 1/4-20 on the south side of the Marshall monitor is busted (which was fine with me as it was obsolete for this yoke). This package is the best quality you can get for the price IMHO. The monitor is also surprisingly very sharp and bright. With the sunhood on in the brightest conditions you are good to go. Located in Los Angeles for local pickup for ship worldwide, buyer pays shipping. Please email me at pcombesk@gmail.com with questions or more pictures. Thanks! Pascal

I'm selling my PRO DBII with upgraded MDR T-bracket and long adjustment knob It is in great mechanical condition, and works flawlessly (purchased brand new from PRO 8 months ago) Pleas e-mail me for pictures and more details - pcombesk@gmail.com Asking : $2,000 or best offer USD/buyer pays shipping Located in Los Angeles for local pickup Thanks! -Pascal

PRO/Optical Support Alexa Base Plate Used very little and in great condition. Photos below. $450.00 Cinematic Precision Alexa Steadicam Plate Also used very little and in great condition. Photos below. $325.00 If interested please email, text, or call. Thanks! Scott (213) 880-2550 scott.camera@mac.com

Go here to see: http://usedproequipment.com/equipment-photos.html

Go here to see: http://usedproequipment.com/equipment-photos.html

PRO Gen II Battery Rack w/ recorder mount & Fracol plate. Recorder mount siderails are not anodized. Performs great, but i decided to go Gen III. No jumper blocks included. $2200 Buyer pays shipping. I'm in Los Angeles.

Hello guys, 
I’m selling my beloved steadicam set. Several decisions and other job opportunities are forcing me to sell my rig, with pain in my hear. It has never been rented and always well taken care of. Items are located in Belgium, but I’m willing to ship worldwide. Prices can be found below, but feel free to do me an offer. Photos can be found at this link: http://checkthis.com/84hl Email me or call me with your questions: jules (at) pain-perdu.be or +32 499 25 81 18 Best regards, Jules Debrock STEADICAM SLED (in heavy duty case) = ASKING 13 000 USD OBO PRO donkey box III PRO gimbal with MK-V tool-less modification (old GPI PRO module included) MK-V carbon tool-less post MK-V V3.5 HD J-box & D-box + post cable (with HDSDI video and special PRO cam power connector) Lightweight base (carbon rods) with one double vertical V-mount and one single V-mount XCS dual rod monitor support arm PRO 2”x5” wrap grip PRO 2”x2” wrap grip POWER (in pelicase) = ASKING 1 000 USD OBO 4 Globalmediapro 160Wh V-mount batteries (Li160S) 4-way simultaneous V-mount charger CABLES AND ACCESSORIES (in pelicase) = ASKING 2 000 USD OBO Long panavision rig cover Spare padded dividers for Pelicases BNC video/antenna cables Assortment of thin HD SDI BNC cables in various lengths XLR-XLR power cable Alexa bracket Artemis camera dovetail plate XCS 3/4” camera dovetail plate with 2x 15mm 8” rods XCS 1/4” camera dovetail plate PRO camera dovetail plate Derose camera dovetail plate Assorted mounting screws for all major camera systems 2x Panavision Small 2-pin (XL) camera power cable 2x Panavision large 2-pin (Flex) camera power cable 2x 24V Arri/Moviecam power camera power cable 2x 12V Arri camera power cable 12V high-speed Arriflex camera power cable RED ONE camera power cable 2x LEMO 8 video cable All tools for sled & arm service components for sled & arm Set of Klein T-hex drivers in all sizes Practice camera cage 2x AB to V-mount adapter plate Various BNC adapters Various Jerry hill bags Tiffen Steadicam standbag

Selling my PRO battery rack 2. Good condition, small chip in upper rear AB mount, that does not affect performance. Comes with recorder mount. Located in LA for local pickup, or buyer pays shipping Price: $3,100 any questions pleas write me at valko.steadi@gmail.com, Thanks! -T

Hello guys, 
I’m selling my beloved steadicam set. Several decisions and other job opportunities are forcing me to sell my rig, with pain in my hear. It has never been rented and always well taken care of. Items are located in Belgium, but I’m willing to ship worldwide. Everything (and more) you need to start going! I’d prefer to sell it as one package, but splitting is an option if there are several people interested. I paid a little over 62 000 USD for this. Every reasonable offer is considered! More photos can be found at this link: http://checkthis.com/pir7 Some items in the description are not in the pictures but are included in the sale! Email me or call me with your questions: jules (at) pain-perdu.be or +32 499 25 81 18 Best regards, Jules Debrock STEADICAM SLED PRO donkey box III PRO gimbal with MK-V tool-less modification (old GPI PRO module included) MK-V carbon tool-less post MK-V V3.5 HD J-box & D-box + post cable (with HDSDI video and special PRO cam power connector) Lightweight base (carbon rods) with one double vertical V-mount and one single V-mount XCS dual rod monitor support arm PRO 2”x5” wrap grip PRO 2”x2” wrap grip STEADICAM ARM PRO (Titan) arm 4 light (blue) canisters 2 heavy (black) canisters PRO canister bag PRO arm carrying bag 4 arm posts with collars (4”, 6”, 8” & 10”) PRO ‘D’ handle low mode bracket raincover for arm VEST Tiffen Ultra 2 vest Cinema products 3A backup vest DP7 PRO HB MONITOR DP7 Pro High-bright monitor Aluminum trim for screen protector SmallHD 2GB USB flash drive DP7 Pro LCD screen protector Sunhood Neoprene sleeve Hirose to D-tap power cable V-mount plate + adapter kit MAGLINER, STAND & DOCKING ACCESSORIES Magliner Junior modified for steadicam Mag steadicam riser unit Mag steadicam vest holder Mag steadicam swing handles Magliner umbrella + clamp adapter Magliner Ipad holder Mag 5/8” nose pin Jerry Hill gorelock 2 docking bracket (complete system) + 2 docking rings 2 PRO docking bracket II Avenger low-boy stand with lockable wheels HARD MOUNT Walter Klassen aluminum tilting endblock Mitchell adapter plate with tie down Elemack (euro-mount) to mitchell adapter Manfrotto clamp Hardware and tools POWER 4 Globalmediapro 160Wh V-mount batteries (Li160S) 4-way simultaneous V-mount charger WIRELESS VIDEO Teradek Bolt set (updated version) - transmitter + receiver D-tap power cable mains power Steadicam AUX power cable Alexa bracket for transmitter Stand bracket for receiver REMOTE FOCUS RTmotion MK3 FIZ hand controller Small receiver 2 motors + 19mm rod clamps (15mm inserts included) Rail bracket for receiver 5 marking rings Cable for wired operation D-tap power cable Power cable to sled 3 batteries + charger Arri run/stop-cable Micro USB cable CABLES AND ACCESSORIES Long panavision rig cover Spare padded dividers for Pelicases BNC video/antenna cables Assortment of thin HD SDI BNC cables in various lengths XLR-XLR power cable Alexa bracket Artemis camera dovetail plate XCS 3/4” camera dovetail plate with 2x 15mm 8” rods XCS 1/4” camera dovetail plate PRO camera dovetail plate Derose camera dovetail plate Assorted mounting screws for all major camera systems 2x Panavision Small 2-pin (XL) camera power cable 2x Panavision large 2-pin (Flex) camera power cable 2x 24V Arri/Moviecam power camera power cable 2x 12V Arri camera power cable 12V high-speed Arriflex camera power cable RED ONE camera power cable 2x LEMO 8 video cable All tools for sled & arm service components for sled & arm Set of Klein T-hex drivers in all sizes Practice camera cage 2x AB to V-mount adapter plate Various BNC adapters Various Jerry hill bags Tiffen Steadicam standbag CASES Heavy duty sled case (sled + monitor) Pelicase 1650 (vest + arm) Pelicase 1610 (accessories) Stormcase iM2075 (remote focus) Pelicase 1400 (hard mount) Pelicase 1520 (batteries + charger)

Wow, where do I start... This is my baby that I have run for a long time, but need to let it go. Selling PRO sled with Cinema Products 3A gold spring arm, rebuilt Cinema Products 3A vest and many accessories. Vest and arm are from my original 3A system I bought back in 1994. I then upgraded to the PRO sled in the late '90's. All be it somewhat old, the whole system is still a great performing steadicam and well taken care of. The PRO sled is basically a V1 with a custom battery bracket for v-mount batts, 1.5" post, post extends 16" to 28". S/N 72 All connections work, but it is not wired for HD. PRO D-Box V1 (I believe), S/N 40, Still very smooth and comes with (2) camera plates. PRO gimbal V1, S/N 70, very smooth! Zacuto Monitor mount with 1/4-20 thread to mount a monitor of your choice. Also includes original PRO crt monitor mount. IDX 2-position battery fast charger. CP sled dock with telescoping spin balancing post (2) .5" motor rods that mount to D-Box camera plates PRO to 4-pin power/bnc video cable for monitor PRO to Movicam right angle 4-pin camera power cable PRO to Arri 4-pin camera power cable PRO to Arri right angle 4-pin high speed camera power cable PRO to Arri Fischer 2-pin camera power cable PRO to Panavision camera power cable (2) 60" thin BNC cables (2) 30" thin BNC cables Set of T-Handle Allen wrenches (2) blue post docking clamps Several 3/8" and 1/4-20 camera plate bolts PRO gimbal wrench Thermodyne hard case for PRO sled Cinema Products 3A arm with Gold Springs S/N 635, still works great, I have replaced the tensioning bolts and has always been cleaned and maintained well, repainted the arm spring covers. 6", 10" and low mode arm posts Arm soft bag Tensioning bolts are now 7/16 bolt that can be adjusted quickly with the included Ryobi drill Cinema Products 3A rebuilt vest, S/N 618, as you can see in photos it has many upgrades from original. No issues with vest. Pads are all removable and washable. Vest and arm come in a Pelican 1650 rolling case if bought together, if separated only vest comes with case. Reasonable offers accepted. Buy it all or let me know what you want. Cheers, Craig

I am selling two of my blue Pro arm canisters. I have owned them from new and they have never been used. Need to get a couple of different colours so these have to go. Pro sell them new for $3200 + shipping, import tax and VAT. Price: £2100 + VAT ono.