Search the Community
Showing results for tags 'ultra 1'.
I am regretfully selling my amazing starter sled, the Ultra 1. I am selling because I recently upgraded to a more powerful rig to eventually get the artemis trinity setup. I also am expecting a baby boy in april so I need to make some room! I bought this sled from James Baldanza a few years back and it has been nothing but great. I am looking to get $12,000 for the sled (and hard case), a steadicam stand, IDX Battery Charger, (7) E-HL9s IDX Batteries (one of which charging lights doesn't work anymore), a bunch of cables, and I am throwing in the IDX Camwave HD/SDI wireless transmitter which even though you don't see around anymore still works in a jam. The sled was recently serviced by Tiffen, I have had it upgraded with an HD/SDI line, as well as changing out the old gimbal to the new steadicam ultra 2 gimbal. There is a third battery plate on the bottom of the sled, and has three different options for battery placement for power. This sled is a super post (27" to 71") so it can go super high mode or super low mode very quickly and easily. It still has the fore/aft - left/right top stage wireless trim control which is one of the few sleds that still has this amazing option. The tilt stage works like a wonderfully and maintains dynamic balance regardless of where you want to angle the camera. I bought an HD/SDI wondland monitor to replace the super bright monitor from Tiffen because it was an older SD monitor and I wanted the HD. It is a cheaper monitor, but works wonderfully and I have rarely had a problem with the light. It can be powered off the sled or with an IDX battery on it's back. This setup also comes with three camera plates (two long and 1 short), three posts (12", 3.5" and 5"), the ultra 1 low mode handle which has been upgraded to work with this ultra 2 gimbal, a 12V power cable, arri alexa power cable, a few BNC cables, the redbyte decimator downconverter (for use with Tiffen superbright as a backup), cables for the decimator made by konash, and also power cables for MDR2 and MDR3 systems. Please feel free to call or email with any questions. Devin Ladd 860-237-0754 firstname.lastname@example.org
Hi chaps, My Ultra 1 is up for sale. I'll be sad to see this one go - it has been my one and only rig for two years, and has never let me down. As you might expect there are some minor cosmetic marks in places like the arm covers or the vest's fabrics, but functionally everything is rock solid and flies smooth as butter. 24V or 12V power comes from V-Locks (not included), which means you can power any camera from the top-stage (cables for Alexa or XLR4 included, amongst others), and the HD-SDI cable I slipped and secured down the post in the beginning has never failed. I'm throwing in a venerable Transvideo Rainbow (SD) monitor, but you'll certainly want to make use of that HD cable at some point! The tilt-stage (un-motorised) and four-stage post are frequently useful features which I'll miss in my next sled, and the tool-free Master/Ultra arm will be difficult to top, honestly. So to sum up, the package INCLUDES: Ultra 1 Cine Sled (HD/V-LOCK/24V/Four-stage Post/Tilt Stage) Ultra 1 Arm (inc. 6" and 12" posts) Ultra 1 Vest Hill Dock Transvideo SD Monitor, Mounting Bracket Dovetail Plate, Power Cables, Video Cables etc. ASKING PRICE £12,000 (no VAT charged) EU delivery at buyer's expense, local pick-up in West London more than welcome. Contact me at emilio dot film at gmail dot com anytime if you'd like to make an offer, simply to have a look at the rig, or just for a chat. All the best, Emilio
I'm selling a customized Steadicam Ultra 1 : Standard: - 4 section telescoping Carbon Fiber Post (24-71") - 12V/24V - All No-Tools - Tilt Head - Frame Lines Generator - 5" Green Screen 16:9 Monitor Customized Extras: - Extra direct HD line (HD SDI) (additional tiny HD coaxial cable 75 Ohm inside the post. BNC connector on top and bottom of the sled.) - Additional 2 wire cable inside the post (Cinch connector on top and bottom of the sled. Could be exchanged to a Lemo or any other connector easely. I used it for Tally) - V-mount Plate Modification (The V-mount plate can easely be removed and it works with the original Ultra 24V batteries again, or you can exchange the V-mount to an AB plate) - Adapter Plate for 24V with two batteries - Modified Fracolizer system. (It has a battery plate mounted. So you can attach a third battery on the bottom of the sled. The Fracolizer plate can be adjusted for and aft or being removed completely. It has a Lemo FHG.2B.303 connector which you can plug in the HS connector on the lower right side of the sled. The sled has a built in switch with which you can turn the third battery on or off thru the HS connector. What will you get: - Ultra 1 HD Sled with extra wiring and customized options - 5" Ultra green screen CRT 16:9 monitor with CG-balanced monitor bracket and bubble (an LCD monitor can be replaced easely if you prefer the non-green way - I mostly used my Transvideo, see picture) - Sled-to-Monitor cable - Modified Fracolizer System - Long Dovetail Camera Plate - Ultra Dynamic Spin and Docking Bracket and two docking rings - Docking Ring for the Hill Balancing Bracket (if you already using it or intend to do) - Original sled hard case (with wheels) Asking price is EUR 19'500 or USD 25'500 This sled is not a regular Ultra sled. It is more a regular Ultra sled with all the bells and whistles of today's needs added. Everything is located in Zurich Switzerland. You can stop by and have a look at the rig anytime. You can pick it up or I will ship it anywhere (add shipping cost). Thank you for your interest. Lukas ( Transvideo, Recorder, Batteries and ALEXA are NOT included! ;-) )
I have two arm posts that will work on Ultra Arms & G70 arms. It's got the helical groove that works with the Ultra arm quick release feature... but this will not prevent it from working on G70 arms. I use them on G70 arms with no issues. These are in great condition. Tiffen sells 12" arms posts for $190 each, I'll take $95 each plus shipping.