Search the Community

New: Cam-Jam - Monitor Mount with 15mm rods for Volt control box. New: Possum Solutions - Custom mounting bracket for SmallHD Ultra5 monitor. Cost: Monitor mount $243.58 15mm Rods $75.28 Shipping $54.70 Intl. card fee $12.49 Customs $61.55 Custom bracket $200 Tax $17.80 =$665.40 -$166 (25% Buyer Discount) $499 Buyer Price (shipping not included)

Selling this complete SLED package, purchased new in June 2022 from Christian Betz in Munich. The gear has less than 30 shoot days, very well maintained, and only shows minor signs of normal use, all visible in the pictures. (More detailed images available upon request.) Betz RIG (2-stage telescopic post 50–85cm, Universal Monitor Bracket, Top Stage with UDP Plate, Junction Box with Line Laser, Gimbal, Motorized Lower Base with 2x V-Mount battery mounts, Docking Bracket) Volt Upgrade Kit for Betz RIG (padded docking fork, Volt system gimbal part, Control Box “Brain”, power and interconnect cables, 15mm rod mount, belts, small parts) Transvideo CineMonitor UHD 6” eSBL Evolution (SDI + HDMI + Analog) Monitor cables + camera power cable (XLR) Transport case: Peli Air 1615 with custom foam for RIG, monitor, docking bracket, cables & accessories Rain covers V-Mount to 4-Pin XLR Input Connector Asking Price: $31,000 USD for the complete package. Preferred buyers are from Germany or the EU, but worldwide shipping is possible. VAT applies for EU buyers without a valid VAT ID. All shipping, customs, and transaction fees are the buyer’s responsibility. Contact: info@babilon-film.de

For sale is my well looked after Gpi-Pro Cinelive Sled. Reluctantly selling as I cannot afford to keep this sled anymore! Read carefully below outlining upgrades, modifications and improvements made! Supply in Gold Mount or V-Mount - read on... Starting Price is £16,500 (+vat if UK based). Roughly $22,140 USD / €19,075 EUR. Additional options outlined below! One previous owner, bought new from Optical Support in 2018. Upgraded GPI gimbal to Volt system in 2020. Upgrade was done by optical support. Replaced main Pan Bearing in 2025. Performs wonderfully! Replaced threaded post connector and receiver in 2025. A great sled from GPI Pro. Check out what upgrades are possible, as the sled is still fully modular. In the future, one could add the superior new Lower Electronics, etc. Possibly 1.75" Post....? Info from top to bottom: Topstage & Upper J Box Betz Topstage & Plate Shimmed to correct clamp pressure on betz plate. Other 3rd party plates also fit well. Cinelive Upper J-Box Electronics Modified to add a 2pin accessory lemo (0B - pin 1 GND), wired into the main 12v line (rather than thinner inadequate wiring from the previous connector). Upgraded HD-SDI BNC 75ohm inputs to better Neutrik sockets. Less worn than previous stock parts. Volt Control Box Cam-Jam rigid control box mounting to betz topstage. (https://shop.cam-jam.de/product/volt-mounting-system-high/). Much better than stock tiffen rod mount (also included). Custom volt control box small power cable with angled lemo connector. (spare included) Custom volt control box front mounting plate for low-mode monitor or accessory. 3/8"-16 threaded insert with arri pin lock standard + 2x 1/4"-20 theaded holes. Easily removable if not required. Lightweight anodised green aluminium. Centerpost: Standard centerpost II 1.5" from Pro. Replaced threaded part, outpost receiver & locking ring (bayonet mount) 2025. Replaced nylon balls 2025 for inner post that run down the channels when extending post. Post Tool included. Gimbal: 1.5" Gpi Pro Gimbal with Tiffen Volt. Standard grip version. Originally upgraded 2020. Serviced in 2025 though optical support, new improved shimming/centering assembly at tilt bearings. Latest firmware. Added rubber grip racket tape around gimbal grip and gimbal handle for improved control and better feel. Can remove if needed! Nice in cold weather! Installed new Pan Encoder + cable 2026. (spare included) Installed new Pan Bearing 2025 purchased direct from Pro for improved performance. Makes a difference! (spare/old bearing included) Standard Volt gimbal control cable. (spare included) (Spare volt belts included) Previous Gpi-Pro Gimbals parts included (non-volt parts). Gimbal steadicam tool included. Monitor Bracket and Monitor 3 Options here: Option A (most OK-ish option) +£0.00 Gpi-Pro Telescoping Monitor Braket + Transvideo 6" Monitor 5/8" telescoping rods Cam-jam Yoke to Pro/XCS style legacy spud. Transvideo 6" monitor. Not as bright as most recent transvideo monitors. 2x Lemo Power cables and HD-SDI cables included. Good for a starter, or backup. May be able to use with latest Gen5 battery rack from pro with these rods... Option B (Better if you have another monitor) + £800 / $1070 / €925 Superior Cam-Jam Quattro II Monitor Bracket & Wide Yoke (no monitor). Great telescoping rigid monitor bracket and Yoke. Can include the mounting arms for SmallHD 703 (see picture) Other mounting parts for other monitors available at cam-jam.de Option C (best option) + £1800 / $2415 / €2080 Superior Cam-Jam Quattro II Monitor Bracket & Yoke + SmallHD 703 Monitor. Includes smallHD 703 monitor with matte screen protector. Used scratches & marks but functions fine. Includes custom flat weight plates for adding weight to the back of the monitor to help with dynamic balance. Stackable. Includes combination power and 2x HD-SDI cables. Use one to loop out of the monitor and back up the 2nd HD-SDI line in the post for an additional output in the topstage for a low mode monitor. Lower Cinelive J-Box Includes x2 Jumper Blocks. 12v all parallel block. Any plate combination can be used. 1, 2, or 3 batteries. 12v (14v) mode only. Shares the load between them. Standard 12/24v block. 14v from positions marked "C/M". Combine with battery in "A" position to create 24v. (Note: "A" position can change based on preference - see Battery Hanger section below). Upgraded HD-SDI BNC connectors 75ohm to Neutrik. Less worn than previous. Battery Hanger GenIV. Lighter weight than the previous GenIII, and makes a shorter sled ~25" fully collapsed (preferable operating feel to me). Modification: Quick change battery plates: Added thin custom aluminium plates with multiple hole patterns. Allows the following: Quick change from Gold Mount to V-mount by swapping plates. Can be done on set. Battery plates are on quick release connectors. Plates use M3 socket head cap screws. Great for travelling if you need to hire different battery types, eg different countries' or rental house's availability! Can change orientation of the battery plates. For AB V-Mount plates which have the same mounting hole pattern, the plate has to be attached backwards otherwise the battery can't be mounted due to the post/j-box in the way. Can move the plate under the post further back if more weight is required away from the monitor for dynamic balance. Good to have options! Can swap the rear 2 plates using the connector inside to determine whether the lower (default) or upper plate is designated "A" for 24v mode. Only weighs an extra 150g / 5oz in total for 3 plates which helps adding some mass to the lower stage of the sled. Upgraded Shottky diodes in Gold mount plates for slightly lower voltage loss. Can Supply AB Gold Mount or V-Mount Extra set of 3 other plates w/diodes installed (+£250 / ~$340 / ~€290) Case: Pelicase 1630 included with cut out foam Dock Tiffen Volt Dock Included Additional Cables 24v Rencher Cinelive -> Arri Alexa 35/265/Mini/MiniLF/Amira Coiled power cable included. Selection of HD-SDI BNC cables 14v Cinelive -> 4pin XLR power cable Spares: Spare Tiffen Volt Control Box Rod mount for Betz topstage Spare Post threaded connector Spare pan bearing (old bearing) Spare Volt control box power cable Spare Volt Gimbal Cable Spare Volt Pan Encoder+cable Spare 10A & 5A Klixon push pull fuses for Lower J Box. Spare volt gimbal shims and belville washers. Spare Volt belts. Please email me at jake(at)jakemcclean.com for more info, any questions or more pictures! Also available may have some Jerry Hill 1.5" docking rings if you already own or prefer to use a JH dock. spin1.mov

Full Steadicam Package: ArmX1, Matrix Sled Chimera with VOLT m2, Vest Lite Location: Amsterdam, The Netherlands Price new: 40.000 EURO Asking: 30.000 EURO Condition: Like New + SmartSystem has a great warranty policy Contact: message me +31 611 922 250 or hello@maartenlangelo.nl for any questions. 1x ArmX1 Load Capacity: Up to 34kg / 74lbs Springs Included: 4x Blue and 4x Black Post: 1x 5/8" standard Arm post EXTRA Long Pin: Highmode pin Arm Post 5/8in – Stick Out 190mm / 7.5in EXTRA Low Pin: ArmX1 Drop Down Kit EXTRA J-Bracket for 5/8″ post 1x Matrix Sled Chimera V Post: 40mm / 1.57″ carbon fiber telescopic post (Range: 530mm collapsed to 940mm fully extended) Gimbal: M2 Volt™ Gimbal Topstage: Versahead Topstage (Micrometric and vibration-free) Primary Power: Dual battery slot (V-Lock or 3-Stud) capable of +12V or simultaneous +12V/24V operation Bottom/Counterweight Power: C Battery Slot (V-Lock or 3-Stud) including 10x counterweights (225g / 0.5lbs each) for balancing heavy camera builds Monitor Bracket: LCD monitor support with CG attachment on carbon fiber rods (fully adjustable in fore/aft and tilt positions) EXTRA Monitor: SmartSystem SM7-3K-Z with built in digital level. (one SDI port broken, no warranty anymore but 100% functional) EXTRA Monitor: 5" for lowmode looped towards bottom monitor EXTRA Camera plate: 300mm extra long from SmartSystem EXTRA: Spare cables for Volt EXTRA: 6x battery FXLion Nano Two + charger EXTRA: power cables to power Arri / RED / Sony camera's EXTRA: Raincover VOLT EXTRA: Windbreaker / Wind-Killer Sunbounce screen Support & Transport 1x Vest Lite: Includes Backpack 1x Hard Case: Sized to safely carry the ArmX1, Chimera Sled, and accessories Feel free to send a DM if you have any questions or want to see more pictures!

Offering my first own rig for sale here - GPI Pro CineLive w. accessories. imported 2nd hand from Buffalo Den, Los Angeles in late 2021 upgraded with a Volt by Christian Betz in Munich, Dec 2021. (original gimbal handle included) I am offering the complete rig with transvideo monitor, original & volt docking brackets, stand, case and accessories, kit does NOT include a vest or arm - nor the camera or lens pictured on the rig. Accessories include tools, numerous plates (including cam jam railway plate & tripod adapter, bracket & rods), cables, screws, etc. A good kit to get you started and well into your career, or as a reliable backup rig. Pictured here and optionally for sale with the rig or separately are: SWIT gold mount batteries (purchased new 2022, see pictures for details) w. 4x charger & case 5 x S-8110A (14.4V 146Wh/10.2Ah) 2 x S-8113A (14.4V, 160Wh / 11.1Ah) 3 x S-8083A (14.4V 130Wh/9.2Ah) hard mount for steadicam arm I will be updating the listing with more details bit by bit, if you have questions, just reach out. The rig and all accessories have been used exclusively by myself since purchasing in 2021 and everything has been taken care of accordingly Located in Berlin, Germany - sale within Germany or Europe preferred. Price is net + VAT. Outside of Germany, VAT can be waived if you can provide your valid VAT ID. In the event of shipping, cost of shipping and insurance is on buyer. No guarantee or returns available, but testing is possible and welcome, just get in touch. Asking price: 17K EUR + VAT without battery kit (batteries, case charger) & hard mount. Happy to negotiate, offers welcome 🙌

video-output-221975AF-BBEB-4CA4-92FB-FBBDBBFCF7EF-1.mp4 so i have this problem with my M2 Volt Steadicam. I set up the system, balance it perfectly and turn on the volt just like always but then it goes literally crazy. Tilting and rolling video-output-221975AF-BBEB-4CA4-92FB-FBBDBBFCF7EF-1.mp4 video-output-221975AF-BBEB-4CA4-92FB-FBBDBBFCF7EF-1.mp4 like mad and it goes stronger each loop, i literally can’t control it. Tried everything, trimming, resetting and all but it ain’t do anything. We have a set going on so im in a serious urgent guys…

selling steadicam M2 Volt gimbal including: - M2 Volt gimbal - Volt padded docking bracket - cam-jam monitor mount 10,000 USD OBO email: dani.dagher@hotmail.com text: +971557158191

Hi there, I am Selling my Tiffen M1 Top Tilt Stage, and my Tiffen 1.75” Gimbal with Volt Kit and Control Box with cables, which were bought from Tiffen Brand new in 2019. Kit has recently been serviced by Tiffen in March 2025. I’m selling as I’m upgrading to Volt 3. Items are available now to ship. Located in Pinewood Studios, UK. Collection welcomed. Buyer pays shipping. PRICE: · TIffen 1.75” Complete Volt Gimbal & Control Box kit - £7,100 + VAT · Tiffen M1 1.75 Tilt Top Stage - £2,500 + VAT Package includes: - Tiffen M1 Tilt Top Stage - Pan encoder ring - Pan encoder cable - Volt power cable - Volt interconnect cable - Volt drive belts - Stage rods and end caps - Pan bearing from Tiffen Blessings

Fully working Tiffen volt kiT it was used with m2 gimbal sensor is for m2 gimbal but you can buy m1 sensor and use on ther gimbals selling bacause ordered volt 3 7900eur

in very good condition Selling full m2 volt gimbal with volt and brain box full set to upgrade almost every sled on the matket 15mm rod mounts gpi pro mount 1.50”;1.58”,1.79” center post adapters 1/2; 5/8” 3/4” arm post adapters all accessories included what are on the table also will give for free KUPO mini dock for 5/8” price 9000€ free shipping around world no tax

Selling my backup sled which has the Artemis 1.75" post and Volt. The Volt (purchased 2023 from Tiffen) has barely been used as I've never needed the backup other than to test so it's been sitting in its case. Currently the Volt is set up for goofy. Includes: Artemis 1 sled complete as pictured with 1.5" arri post (Arri's high capacity wiring) Volt Gimbal and control box w/Arri mount bracket 1 Volt power cable (identical looking to the Pro one but different pin config) - order extras through Arri. 1 Tiffen Volt Interconnect (Control) Cable 1 Arri notched sliding top plate 1 Volt Blue Whale Tale Gimbal Wrench Pelican 1730 Case. In excellent condition. 20,500 USD Buyers outside LA responsible for shipping, foreign taxes, duties, and/or additional fees. Will consider selling 1.75" post (without center cable), Volt Gimbal, Volt Control box, Arri mounting bracket for Volt, Volt Cables (as pictured) and Whale Tale separately for 11,750 USD (no Case) Reach out with any questions cockerill1@gmail.com Thanks!

This kit includes: - TIFFEN Ultra 2 – 3 stage sled - TIFFEN Volt Kit - Small cable package (2x BNC’s, 1x ARRI Mini/LF power, 1x XLR power cable) - Docking bracket - Volt cables - Original Theromodyne hard case **Some impact damage to the base, it has been glued and reset but has visual cracks shown in photos** £14,000 + VAT (Offers Accepted) Please email sales@opticalsupport.com for offers and enquiries. IMG_9523.jpeg

I decided to sell my full kit of steadicam Archer 2 since I barely used it in the last year. The kit include - Tiffen Steadicam Archer2 Sled + monitor - Volt 1 - Tiffen G50x Arm ( It was upgraded G50x a few years ago) - Tiffen Steadicam LX vest (The vest shows the most signs of use, but it remains fully functional.) - 4x v-mount batteries + charger - low mode bracket - 3pin lemo to 4pin XLR cable for the monitor - Docking bracket for volt - Arm and sled adjusting tool - Rt M1 volt cable - M1 volt cable - Extra replacement belt volt - 3 BNC cables - 2 dove plate - 1 set of weight - Camera bags for accessories - Pelican case for Sled + arm + vest - 1 low boy stand The sled was send to Tiffen for a maintenance and check up in 2023. I do have the invoice as a proof. Asking for 18k$ USD for the full kit (buyer need to pay for the shipping) Always open for fare negotiation Jonathan (Canada)

Hi folks, I’m making some life changes and will be letting go of my steadicam package. Package was originally purchased from a wonderful operator named Matt Petrosky out in Atlanta. This was his back up sled and was barely used. I made some upgrades to the package including adding the Volt system, and a low mode setup. Live in LA prefer a local buyer but can ship at the buyer’s expense. Contact me here if you are interested at or at allen@scriptlessmedia.com Package includes: GPI PRO II HD SLED (SD internationals) DONKEY BOX II Cinetronics Monitor Cam Jam Low mode monitor rod system Ninja V (low mode monitor) Cam jam monitor bracket Pelican 1650 (sled case) Pro vest ArmX1 Case ArmX1 with 4 blue and 4 black springs (only 1.5 years old) Rain cover for arm Battery Case (battery and charger case) 5x Batteries 4 Broadcast 150Wh batteries 1 Batteries 4 Broadcast dual charger American Stand with wheels Jerry Hill Docking Bracket Arm post holder attachment 3 arm posts 10in. 8in. 6in. 1 Pro camera plate 1 Zalex Long Plate 1 Arri mini LF plate Steadicam weight cage Various length of high quality BNC cables.

selling Betz Wave 1 including: - Wave 1 - hprc hard case - 3 power cables: dtap / 3 pin / 2 pin - XCS side to side plate 5500$ including XCS plate 4800$ excluding XCS plate dani.dagher@hotmail.com +971557158191

FULL STEADICAM ARCHER 2 VOLT w/ G50x KIT Full Kit Price - $25k Steadicam Archer 2 Sled (V-Mount) Steadicam Volt Upgrade for Archer2 Steadicam Exovest with Large Socket Block Steadicam G50X Arm Bag for the arm Dovetail Plate 7x RED V Mount Batteries 2x RED V Mount Chargers Pelican Case For Batteries and Chargers Low mode bracket Long Arm Post Steadicam Docking Bracket Thermodyne Hard Case for Sled and Arm Steadicam Tally Cable VFA-2 Alexa Mini Viewfinder Adapter 1x 12V Lemo to XLR 4-pin cable 1x 24V Lemo to Fischer, Alexa power cable 1x 24V Lemo to Fischer, Alexa Mini/Amira power cable 1x Tally Light Cable Located in Los Angeles, CA Email: russelltandy1@gmail.com

Hey guys, Career is heading in a different direction. For sale is an essentially brand new complete steadicam package. It's only seen practice sessions, not been on set. Everything is essentially brand new condition, ideal for someone starting out or looking for a complete secondary setup. Nothing wrong with the equipment at all, save a few thousand $ by buying extremely lightly used set. -M2 TOP STAGE TILT WITH DOVETAIL PLATE AND INTERNAL VOLT CONTROLLER -M2 GIMBAL 1/2", 3/4"" & 5/8" & VOLT MOTOR DRIVE -1.75 2-SECTION INDEXED POST (20.8”"-35.7""/528mm-908mm) -1.75 MONITOR BRACKET WITH UNIVERSAL MONITOR MOUNT -SWIT 7" Super-Bright Compact HD LCD Monitor -M2 V-LOCK DUAL BATTERY BASE 12/24V -M2 3rd BATTERY MOUNT V-LOCK WITH DOVETAIL 12/24V -Volt Padded Docking Bracket for M1 -GOOFY EXOVEST WITH LARGE SOCKET BLOCK & SOFTBAG -M-SERIES SLED & DOCKING BRACKET HARD FLIGHT CASE -Volt Drive Unit Rain Cover -STEADICAM STAND WITH WHEEL SET -2x 24 Volt XLR4 cable for Sony Venice -CABLE, POWER, 24V, 2B LEMO TO ARRI ALEXA MINI -2x Power Cable, 24V, 22"Right Angle 2B.303 to 2-Pin Fischer // ARRI Alexa + ARRI 65 (24V only) -Low Mode Bracket -Mounting Block Kit for Transvideo 6" Cine Monitor -VOLT PAN SENSOR, M2 GIMBAL -FLOWCINE X ARM with 2x blue, 2x orange, 2x purple springs -Weather cover for xArm -xMOUNT Mitchell boom kit -Armpost high/low mode kit 0.74” -Blackmagic 5” video assist low mode monitor -CAMJAM low mode monitor mount -Blackmagic HDMI/SDI converter Asking $53000 USD for the package. Items are located in Dubai, UAE. Buyer pays shipping. Cheers, Reid Cheers,

For sale is a mosespole Volt yoke with baby pin adapter and pin. You know you need this. low low price of 475 Shipping is on the buyer. thanks, Buzz Moyer

Hi everyone, I'm selling my [Tiffen Steadicam Package]: in excellent condition 1.Archer2 w/Volt $18,500 Just changed a new bearing from Tiffen, with maintenance and clean Brand new 702 touch Low mode monitor bucket + Ninja 5 w/ CONECT Volt rain cover 2.G50x Arm $7,500 My back up arm, never used since last time got the maintained and clean from tiffen. Rain Cover 3.Lx vest $2,000 Only used for few times. Located at Los Angeles, prefer local buyer There will be a small discount if you buy the whole package jiayulifilm@gmail.com Thank you all Jiayu Li

I’m now using a sled for MOVCAM. It’s MOVCAM Avant t. and I’m wondering. Is the volt available to put on my rig. My rig’s post size is 1.5” (same as archer 2). And it has a way to put volt brain box. So, if it is possible, I want put volt on it. I want to hear any thoughts on this topic. Pls help on it. Thank you.

Hello! Selling some of my gear: 1) KenLab 6x6 gyroscope ready for steadicam use. The gyro has been on my shelf for quite a while now, I’m using 4x4, 8x8 and single KS-4 these days. 6x6 served me very well. I hope it will find a happy user. What’s in the kit: - inverter, - power cables, - 2x battery pack - Sachtler mounting plate with small dovetail - set of different type of screws for the gyro Serviced by KenLab 2 years ago, sent for a rebuild. In working condition. Asking 3600 EUR + shipping + taxes outside EU 2) Transvideo CineMonitor 6" XSBL 2000 nits Used, but in mint condition. Screen is untouched, minor scratches on the case. Asking 2400 EUR + shipping + taxes outside EU 3) Tiffen M Series Volt Docking Bracket Used just a few times, in very good condition. I'm selling as I use Jerry Hil Docking. Asking 800 EUR + shipping + taxes outside EU Invoice possible. Will consider offers! Located in Warsaw, Poland. If you have any questions, feel free to ask. halla@maciejtomkow.com or Whatsapp +48 608 014 826 Maciej

Selling a 3 battery, 3 section, Tiffen M2 Volt Steadicam. It has been meticulously cared for and has been used in tandem with a non Volt rig for the last few years. See included items below: Docking bracket w 5/8 and pro spuds Two back up gimbal bearings Monitor mount spacers 3 volt cables 2 sled to mini cables 12 volt 2 sled to mini cables 24 volt 2 sled tilta power box cables 1 sled to 4 pin 1 sled to Pana 2 sled to Pana xl 2 sled to small hd and BNC Gimbal tool Price is $24,500 Thanks, John "Buzz" Moyer

Ended up with this handle because of the package I bought, never used it. Mint condition, brand new. Make me an offer, happy to ship or local NYC pick up. Goes for $555 new, but willing to come down. 3/4” ForTIFFEN arms.

Selling my 'Ready to Shoot' Tiffen M2 Volt, G70x Arm, Flowcine XSpine Vest package. Great for anyone looking to upgrade from a beginners sled and looking for a full package that's ready to go. Kit is 'Like New', never been on set and only rigged up a handful of times. Purchased at retail cost, sales tax already paid. My loss, your gain. Can ship in the US at buyers expense. See spreadsheet in the folder for all components, accessories and more photos: https://drive.google.com/drive/folders/1HKLnjR7foDu2EgYltWZ2tKJlJtHQPiA-?usp=sharing

Hey! I am currently using a Sachtler Cine HD Pro Sled with an 1.8 Post. I have a few questions: Is it possible to switch out the 1.8 Post with a 1.74 or Volt compatible Post? If yes, which accessories I need new? New Gimbal with Volt Something else? How to attach the volt box on the sled? which accessorie do I need? Service, Volt, new Post...it is just "cheaper" to sell the old Sled and buy a new one?