Premium Members Grayson Austin Posted May 4, 2014 Premium Members Report Share Posted May 4, 2014 For Sale is a beautiful PRO Rig that is fully upgraded for HD and has the new PRO post connectors. Most parts are as new/unused. This was an additional rig that I now don't need. Here is a list of the basics: * New/Unused PRO Donkey Box 2 (new version). *(2) New/Unused PRO long dovetail camera plates. *New Unused XCS Camera Dovetail Plate. *Choice of PRO or XCS Preston MDR mount, both new/unused. *PRO Upper Junction box (fully rewired for HD with PRO quick disconnect from post). *New/Unused PRO telescoping centerpost with PRO HD centerpost cable. *New/Unused PRO Gimbal with Handgrip Sleeve and Kipp Handle clamp. *Spare standard PRO Gimbal Collar. *PRO Lower Electronics Housing (fully rewired for HD as well). *New/Unused PRO Battery Rack 3 with IDX V Mounts plates. *(4) PRO Jumper Blocks. *New/Unused Cinetronic Monitor Mount/Post clamp assembly (complete). *New/Unused Cinetronic Monitor Yoke. *New/Unused Cinetronic Gen2 HD Monitor. *New/Unused Cinetronic Level Sensor. *New/Unused Cinetronic Level mount for PRO lower electronics housing. *New/Unused Cinetronic Level Sensor cables (3). *PRO 8 pin lemo Monitor Power Cable. *PRO Camera power cables Arri 24Volt (2), Panavision (2), Red (2).\ *PRO Gimbal Wrench, Post Wrench. *Docking Ring for Jerry Hill Gorelock. *Other Misc parts. *Shipping Case. Almost $29,000 worth if purchased new. Selling for $23,000. Serious Only. Email Only to: graysonaustin@me.com Link to comment Share on other sites More sharing options...
Premium Members Thomas Schnaidt Posted May 4, 2014 Premium Members Report Share Posted May 4, 2014 hey Grayson, is it pretty easy to change out the IDX mounts to AB? Tom Link to comment Share on other sites More sharing options...
Premium Members Grayson Austin Posted May 4, 2014 Author Premium Members Report Share Posted May 4, 2014 Yes, Thumbscrew removes each individual battery plate (see photo) and PRO would probably exchange them for Anton Bauer mount versions since they have never been used but that would be totally on the buyer to ask about and take care of, however with the whole Anton Bauer thing lately and changes to battery cases over the years that do not center the batteries, I don't know why anyone uses the Anton Bauer mount anymore. They also have a lot of slop in them which causes vibration. Stopped using Anton Bauer mounts years ago. Please email with any other questions though. I don't always check the forum on a regualr basis. Thanks. Grayson Grant Austin, SOC graysonaustin@me.com Link to comment Share on other sites More sharing options...
Premium Members Grayson Austin Posted May 9, 2014 Author Premium Members Report Share Posted May 9, 2014 I've been asked if the rig and monitor could be sold separately. The answer is yes. Selling rig by itself for $19,000. Selling Cinetronic monitor with Cinetronic level and cables for $3500. Buy the full package as described above for $22,000 (I lowered the package price to make this a really great deal). Again, almost $29,000 worth of gear, most everything as new/unused for a fantastic price. Email Only Please. Also, please no window shopping. If you aren't prepared to buy now or don't have your finances in order, don't email. Grayson Grant Austin, SOC graysonaustin@me.com Link to comment Share on other sites More sharing options...
Premium Members Grayson Austin Posted June 9, 2014 Author Premium Members Report Share Posted June 9, 2014 Rig is sold. Thanks. Grayson Grant Austin, SOC Link to comment Share on other sites More sharing options...
Recommended Posts