Sverker Hahn Posted March 3, 2010 Report Share Posted March 3, 2010 Hi, everybody, The Pilot has arrived and I am eager to get it working until the workshop in May. But I don´t get a picture from my Sony EX1 to the monitor. It does react when I change settings for video out in the meny, from NTSC changes to PAL when I select SDI output. I have circled the settings on the monitor, but so far no picture. Are there any tricks or obvious settings I might have missed? Quote Link to comment Share on other sites More sharing options...
Premium Members Brian Freesh Posted March 3, 2010 Premium Members Report Share Posted March 3, 2010 This might help But let me know if it doesn't Quote Link to comment Share on other sites More sharing options...
Sverker Hahn Posted March 3, 2010 Author Report Share Posted March 3, 2010 This might help But let me know if it doesn't OOoops! Where did I put that cable?? Haven´t used it for two years, it must be somewhere in the snake nest of cables. Will look for it tomorrow. Thanks! Sverker Quote Link to comment Share on other sites More sharing options...
Sverker Hahn Posted March 4, 2010 Author Report Share Posted March 4, 2010 OOoops! Where did I put that cable?? Haven´t used it for two years, it must be somewhere in the snake nest of cables. Will look for it tomorrow. Thanks! Sverker Found the cable. Only the yellow video connector is in use, the other two hang loose. But it works! Thanks again! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.